Coffee Queen BRILLIANCE 3.0 User manual

TM_EN
Part No.: 1764040_03
BRILLIANCE 3.0
TECHNICAL MANUAL

2
BRILLIANCE 3.0
CONTENT
CONTENT.........................................................................................................................................................2
GENERAL............................................................................................................................................................4
Facts & weight...........................................................................................................................................................4
Dimension..................................................................................................................................................................5
OVERVIEW OF COMPONENTS......................................................................................................... 6
Front exterior...........................................................................................................................................................6
Front interior............................................................................................................................................................7
Recipe and cleaning card........................................................................................................................................8
GRINDER SETTINGS................................................................................................................................... 9
Coarsness adjustment.............................................................................................................................................9
Doser adjustment ................................................................................................................................................. 10
CLEANING PROGRAM.......................................................................................................................... 11
Rinsing...................................................................................................................................................................... 11
Cleaning with tablets............................................................................................................................................ 12
Launching the rinsing without cleaning card................................................................................................... 13
CLEANING AND CARE......................................................................................................................... 14
Disassemble mixing system ................................................................................................................................ 14
Wash these parts .................................................................................................................................................. 15
Reassemble mixing system ................................................................................................................................ 15
Disassemble the espresso group....................................................................................................................... 16
Reassemble the espresso group ........................................................................................................................ 17
Cleaning the espresso group.............................................................................................................................. 18
Applying grease to group .................................................................................................................................... 19
Periodic maintenance........................................................................................................................................... 22
Safety........................................................................................................................................................................ 22
Every month........................................................................................................................................................... 23
Disassembly the grinder...................................................................................................................................... 24
MESSAGE SHOWN ON DISPLAY................................................................................................... 25
Temporary warnings messages .......................................................................................................................... 25
Alarms ..................................................................................................................................................................... 26
What to do if ......................................................................................................................................................... 27
PROGRAMMING ........................................................................................................................................ 28
Active programming with recipe card.............................................................................................................. 28
Programming buttons........................................................................................................................................... 29
Doses program...................................................................................................................................................... 30
Machine Parameter............................................................................................................................................... 31
Other settings........................................................................................................................................................ 32

3
BRILLIANCE 3.0
Recipe explanation................................................................................................................................................ 33
Doses adjustment time scheme......................................................................................................................... 36
ELECTRICAL DIAGRAM........................................................................................................................ 37
IO-Board outputs.................................................................................................................................................. 37
Wiring sketch......................................................................................................................................................... 38
FLOW CHARTS.......................................................................................................................................... 39
Water system vibration pump ........................................................................................................................... 39
Water system rotary pump ................................................................................................................................ 40
EXPLODED VIEW...................................................................................................................................... 41
Machine 1................................................................................................................................................................ 41
Machine 2................................................................................................................................................................ 43
Door/Front............................................................................................................................................................. 45
Vibration pump...................................................................................................................................................... 47
Rotary pump .......................................................................................................................................................... 48
Boiler assembly...................................................................................................................................................... 49
Mixing system and outlet .................................................................................................................................... 51
Canister................................................................................................................................................................... 52
Espresso group ...................................................................................................................................................... 54
FACTORY SETTINGS............................................................................................................................... 56
Default recipes....................................................................................................................................................... 56
SERVICE INTERVALS................................................................................................................................ 57
CONTENT
IMPORTANT!
INFO.
CAUTION!
INFO.
More INFO. INFO.
Some important information may appear in textboxes seen below
Note

4
BRILLIANCE 3.0
Facts & weight
FACTS VIBRATION PUMP 2.0 ROTARY PUMP (RP)
Built-in grinder Ye s Ye s
Function for selecting jug None None
Drink options 8 8
Ingredient canister 2 2
Bean hopper 1 1
Brewing mechanism Ye s Ye s
Cleaning function by smart card Ye s Ye s
Electronic temperature control Ye s Ye s
Adjustable coffee strength Ye s Ye s
Illumination of cup during brewing None None
Base cabinet: large grounds container Option Option
Energy saving mode None None
Height,Width, Depth 664, 394, 474mm 664, 394, 474mm
Air break tank Ye s None
Boiler tank 0.7 L 0.7 L
Power supply (standard) 220-230VAC,
50/60Hz/1500W
220-230VAC,
50/60Hz/1500W
Power supply (option) 110VAC,
50/60Hz/1000W
110VAC,
50/60Hz/1000W
Cold water connection ½” External thread ½” External thread
Water purication lter None None
To determine what power supply the machine uses, please check power label at the
back of the machine.
Note
MODEL/NAME WEIGHT
BRILLIANCE 3.0 35kg(Empty) / 39kg (Full)
GENERAL

5
BRILLIANCE 3.0
GENERAL
Dimension
D
Model A B C D (Min~ Max)
Brilliance 3.0 664mm 474mm 394mm 75mm ~ 133mm
A
B C

6
BRILLIANCE 3.0
OVERVIEW OF COMPONENTS
Front exterior
Eight buttons are available to select 8 different beverages. Some of these buttons
have additional functions as below.
BUTTON SUPPLEMENTARY
FUNCTION FUNCTION
K1 -(Minus) Decreases the value or changes to previous selection
K2 Canc Cancel selection and/or exit to previous menu
K5 +(Plus) Increases the value or changes to next selection
K6 Enter Confirms selection
K1
_
Canc
+
Enter
K2
K3
K4
K5
K6
K7
K8
Selection Button
Bean hopper
Display
Door
Door lock
Smart card reader
Height-adjustable spouts
Drip grid
Drip tray

7
BRILLIANCE 3.0
OVERVIEW OF COMPONENTS
Front interior
Ingredient canisters
Bean Hopper
Ingredient Canisters
Mixing Bowl
Espresso Group
Height-Adjustable Spouts
Grounds Container
Drip Tray
DETAIL INGREDIENTS WIDTH DEPTH HEIGHT CAPACITY CUPS/
UNIT
Bean Hopper Beans ---- ---- ---- ~2kg ~250 cups
Canister Chocolate 65mm 165mm 250mm ~1kg ~50 cups
Canister Milk/Topping 65mm 165mm 250mm ~0.6kg ~75 cups

8
BRILLIANCE 3.0
K1
_
Canc
+
Enter
K2
K3
K4
K5
K6
K7
K8
OVERVIEW OF COMPONENTS
Recipe and cleaning card
Cleaning card is used to access the cleaning functions of the machine.
Recipe card is used to update or download recipe setting of the machine.There are two version,
Rotary pump and Vibration pump.
Insert card with the chip in, according to the fig.A
Cleaning card Recipe card
(Vibration Pump)
Recipe card
(Rotary Pump)
A

9
BRILLIANCE 3.0
GRINDER SETTINGS
To adjust the coarseness, please rotate the adjuster counterclockwise for
coarser grinding, or clockwise for finer.
Take into consideration that after the adjuster is moved, the effect is not
immediate; it takes about 3 espresso cycles for the new cofee grounds to reach
the outlet of the doser. So to test the new adjustment, observe the third or
fourth espresso after the change.
The thinner the grinding, the slower the espresso will come out, and longer time
will be needed for the extraction of the espresso and vice versa.
Coarsness adjustment
CW for
finer grinding
CCW for
coarser grinding

10
BRILLIANCE 3.0
GRINDER SETTINGS
Dosers are devices that can control the amount of ground coffee that the
espresso group is supplied with.
Doser must be adjusted between position 3 to 9, if the piston of the Espresso
group is adjusted to A, the doser adjustment should be from 6.5g to 8.5g . if the
piston is adjusted to B the doser adjustment should be from 8.5g to 9.5g, never
further, as over charging the group will produce a poor espresso.
To adjust the doser, push gently the selector out of position and adjust to the
selected amount.
Doser adjustment
Doser Pos. 3 4 5 6 7 8 9
Gram 6.5 7 7,5 8 8,5 9 9.5
Ajusting doser between position 3 ~ 9. The piston position A and B.
A
B

11
BRILLIANCE 3.0
CLEANING PROGRAM
Rinsing
Rinsing
This rinsing function allows for an easy cleaning of the outlets of the machine.
Rinsing is recommended at least once a week, but preferable every day,
especially if used in high consumption environments. This software routine
flushes the different outlets of the machine, Starting with the mixing system
and finishing with the espresso group.
Place a cup under the outlet after, Insert the cleaning card in the card reader,
the display will show:“Rinsing” .
Just press,“Enter” to run this function, and wait until the cycle is finished.Take
into consideration that the door of the machine has to be closed (as long as
it is open, the cleaning will not start).The process can be canceled by pressing
“Canc”.When the routine has finished, the machine will return into service
and the message “Select Beverage” will show on the display.This function
takes about 1min 45secs, and uses aprox. 150ml of water.
K1
_
Canc
+
Enter
K2
K3
K4
K5
K6
K7
K8
A

12
BRILLIANCE 3.0
Weekly Cleaning
Insert the cleaning card in the card reader with the chip downwards, toggle
through the menus using “-” or “+” until “Cleaning with tablet” is shown on
the display, press “Enter” to start the operation.
Remove the cleaning card when the display shows “Open door add tablet”.
The display on the machine gives you step-by-step information of what to do.
The function cleans the inside of the espresso group, the filters and pipes.
The cleaning programme takes about 10 minutes and about 1 litre of water
mixed with detergent comes out from the drain.
Finally, make one cup of coffee and throw it away.
Cleaning with tablets
K1
_
Canc
+
Enter
K2
K3
K4
K5
K6
K7
K8
Cleaning with tablet
Open door add tablet
CLEANING PROGRAM
K1
_
Canc
+
Enter
K2
K3
K4
K5
K6
K7
K8
A

13
BRILLIANCE 3.0
K1
_
Canc
+
Enter
K2
K3
K4
K5
K6
K7
K8
CLEANING PROGRAM
Launching the rinsing without cleaning card
Switch
The execution of the rinsing can be launched without having to open the door
of the machine. As to do that :
Turn off power to the machine from its main switch.
With its door closed, turn on the machine, and simultaneously keep the
buttons K3 & K7 pressed. The rinsing process will begin shortly.
When finished, the machine will enter the normal functioning mode.

14
BRILLIANCE 3.0
Weekly Cleaning
CLEANING AND CARE
01
03
06
Disassemble mixing system
02
04
05
Turn the mounting plate lever anticlockwise.
Rotate the canister chutes so they point
upwards and pull out the outlet hose.
Loosen the mixing bowl by pulling it straight
out.
Loosen the whipper by pulling it straight out.
Loosen the mounting plate.Turn the lever
anticlockwise, until it stops.
Reassemble mixing system
See the next page
Pull the mounting plate straight out.

15
BRILLIANCE 3.0
CLEANING AND CARE
Weekly Cleaning
0201
03
04
Reassemble mixing system
All parts must be dry before reassembly.
A
Wash these parts
Mixing bowl Condensation trap Mounting plate Whipper Clean with a moist
cloth and wipe dry.
The flat side of the whipper shaft must correspond with the
marked arrow on the whipper.
To fit the whipper push onto the shaft until a click sound can be
heard. It is only possible to assemble the whipper in one way.
Fix the mixing bowl and condensation trap. Push-fit the mixing
bowl and fix with lever.
Connect the outlet hose.
Ensure that all water hoses have been
connected and tted.
Check all seals (red) before
reassembly of parts.
Note

16
BRILLIANCE 3.0
CLEANING AND CARE
Disassemble the espresso group
To remove the espresso group follow the following steps:
0605
03 04
0201
To remove the espresso group follow the following steps:
Open the door and push down the
outlet beam.
Loosen the fixation screw at the bottom of the brewer.
Put your hand under the brewer, push up and
forward at the same time until the brewer is
detached at the back.
Loosen the outlet tube from the brewer
by pulling it straight out.
Pull the brewer straight out.
Press down the safty ring on the connector simultaneously
pull the teflon tube straight up.

17
BRILLIANCE 3.0
CLEANING AND CARE
Reassemble the espresso group
To reassemble the espresso group follow the following steps:
Replace the brewer in front of the gearbox.
Reconnect inlet and outlet tubes.
Push up the outlet beam to the original position.
Attach top part at the back of the brewer to
the hooks on the gearbox. push in the bottom
part untill a click is felt.
Push in the brewer to original position and
fasten the fixation screw.
01
03
05
02
04
To reassemble the espresso group follow the following steps:
“Click”

18
BRILLIANCE 3.0
Cleaning the espresso group
First, remove the espresso group from the machine as explained earlier in this
manual.Then proceed to clean it with neutral detergents (avoid solvents that
could damage paint or plastics). Disinfectant products as Chlorine-detergents
are preferred.
The producer declines all responsibilities due to the use of caustic/aggressive
detergents.
CLEANING AND CARE
After this, proceed to clean the remaining surfaces of the group.
Dry up the brewer using a soft rag. turn the brewer upside
down and shake it to force as much water out as possible. Make
sure to pay extra attention when drying up the powder cone
located above the brew chamber, as this is the one receiving the
grinded coffee. If this cone is humid, it may cause the cone clog
with coffee powder.
Once all cleaning is completed and the brewer heve been put
back in place, we recommend to perform an auto-cleaning cycle.
IMPORTANT!
Turn the group upside down to clean the upper lter of
the espresso chamber. (See g. A)
Whenever the quality or speed of the outgoing
espresso changes, clean the upper lter thoroughly.
It will be very likely partially clogged with tiny
coffee particles. Cleaning this lter will solve the
speed and quality issues.
Note

19
BRILLIANCE 3.0
Applying grease to group
CLEANING AND CARE
Apply grease on the cam
of the gear wheel (this side
facing down)
Apply grease on the
pin of piston rod and
verify it moves freely
Recover the nut
opposite to the screw

20
BRILLIANCE 3.0
align the signs
Position 0 °
Insert the gear wheel,
align the signs
Position 0 °
CLEANING AND CARE
Applying grease to group