CognitiveTPG Thrive User manual

Installaon Guide

7911 Rae Blvd. | Victor, NY 14564
585 / 203 1969 | cognivue.com
Let’s Get Started!
Installaon Guide
7911 Rae Blvd. | Victor, NY 14564
585 / 203 1969 | cognivue.com
[email protected] | 585.203.1969
cognivue.com/support
CONGRATULATIONS on taking the rst step towards promong
cognive health in your health care seng.
This guide contains informaon that describes the installaon and setup of the
Cognivue ThriveTM device. Also included; frequently asked quesons and a
comprehensive User Manual.
Cognivue support personnel can be reached 9am-5pm EST at 585-203-1969 or [e-mail].
Addional informaon can be found at www.cognivue.com.

Set up the keyboard
Slide the power switch on the back side of the keyboard to the
green "on" posion. The keyboard automacally connects to the
Cognivue Thrive device via USB. You will use the keyboard and
the built-in touch pad during the installaon process.
Plug in the Cognivue Thrive device
Plug the adapter cord into the power outlet located in the back
of the Cognivue Thrive device, then plug the AC power cord for
the adapter into a standard 120v outlet.
Open the lid of the Cognivue Thrive device
Slide the lid latch lock to the right and open the lid.
7911 Rae Blvd. | Victor, NY 14564
585 / 203 1969 | cognivue.com
7911 Rae Blvd. | Victor, NY 14564
585 / 203 1969 | cognivue.com
[email protected] | 585.203.1969
cognivue.com/support
INSTALLATION
GUIDE
Complete the following steps
before the installaon of your
Cognivue ThriveTM device.
Power
Outlet
USB Port
On/O
Buon
Page 2 of 5
RECOMMENDED: Contact your internal network support team for a stac IP
address, subnet mask and default gateway.
If you do not have this informaon, no problem! Your network will automacally assign an
IP address to the Cognivue Thrive device. Keep in mind, your internal network may be set
up to periodically reassign IP addresses. If the IP address in your Cognivue Thrive device
does not match the new IP address in your network, you will need to follow the steps to
re-connect the device to your network.

INSTALLATION
GUIDE
Setup the CogniCover
®
1. Pull up the top panel of the CogniCover.
2. Swing open the le and right panel.
Set up the CogniWheel
®
To setup the CogniWheel, using the tab, ip open the knob of the CogniWheel.
Turn on the Cognivue Thrive
TM
device
The power buon is a small round black buon, located at the top right corner of the main surface.
Press the power buon and the screen will light up within a few seconds.
CogniCover®
Headphone
Port
CogniWheel®
Overnight - Leave Cognivue Thrive plugged in, turned on, and secure
The Cognivue Thrive device needs to be le on, plugged into an AC outlet, and connected to
the internet overnight to ensure it is available to receive soware updates. A wire cord and lock
can be used around the handle to secure the device when not in use. You can close the lid; the
Cognivue Thrive screen will go to sleep and Thrive will stay powered on.
Built-in rechargeable baery
Cognivue Thrive can also be operated using the built-in rechargeable baery, which requires
approximately 4 hours to fully charge. The baery will last up to 4 hours of connuous usage or
up to 8 hours of intermient usage.
Screen sleep mode
The screen on the Cognivue Thrive device goes into sleep mode aer 5 minutes of inacvity.
To wake up the screen, simply press or swipe the touchpad on the keyboard. Make sure the
keyboard is turned on.
Powering o
There are 2 ways to power o the Cognivue Thrive device. The recommended method is to
choose "Shutdown" from the Login Screen (to get to the Login Screen, click "Exit" from the
Main Screen). The alternave method is to press and hold down the power buon for 5-10
seconds, unl the screen goes blank and you hear a clicking sound.
Power Buon
Page 3 of 5
[email protected] | 585.203.1969
cognivue.com/support
You are ready to install the Cognivue Thrive device!

Conrm Set-Up
INSTALLATION
GUIDE
7911 Rae Blvd. | Victor, NY 14564
585 / 203 1969 | cognivue.com
7911 Rae Blvd. | Victor, NY 14564
585 / 203 1969 | cognivue.com
[email protected] | 585.203.1969
cognivue.com/support
Follow the on-screen Conguraon
Wizard to complete the installaon process.
If the Conguraon Wizard does not start automacally, contact Cognivue
support at [email protected]om or call 585-203-1969 between 9am-5pm
EST, Monday through Friday.
For addional resources that can assist you with the setup process, refer to the
User Manual.
The on-screen instrucons will guide you through the following steps:
Create Admin User Account
STEP 1
STEP 2
Connect to Your Network
STEP 3Conrm Setup
STEP 4Login and Begin
Page 4 of 5
To locate available WiFi Networks, click the icon in the top
le corner of the screen.
For instrucons on how to install the remote app, go to page
18 in the User Manual.
The Cognivue Thrive device is setup and ready to use!