receiver does not answer in dialing, the phone will automatically redial the number.
The maximum redial times are 10. And during this period, the subscriber cannot dial
any other number. Press the End/Power key or the Right soft key [Cancel] to end
auto redial.
·Answer mode: use the OK key or the Left soft key to turn any key on or off, if
activated, you can answer incoming calls just by any key except the Red key and the
Right soft key.
Network settings
•Network selection: Choose to Automatic or Manual select network. If automatic
selection, the phone will select the current network where your SIM is registered to. If
manual, your phone will search for and list down available networks for your selection,
note that you must select the network where your SIM is registered to.
•Preferences networks: Set or modify your preferred network. It will display the network
preference list as stored in your SIM.
Network status
Display the status of network.
Security settings
You can set security options of the phone under this menu so that the phone or the SIM
card cannot be illegally used.
•SIM security: Press the OK key to activate or deactivate SIM Lock, the current status is
displayed in a dialogue box when you scroll to this option. To activate SIM PIN, you will
be asked to enter the PIN code. If activated, you will be required to enter the PIN every
time you turn on the phone. Please consult with your service provider for more details.
Note: If you key in the incorrect PIN code for three times consecutively, the SIM card will
be locked. The PIN code and PUK code may be offered with the SIM card, otherwise
contact your service provider. The default PIN code is usually 1234. Please change your
initial phone code promptly.
•Phone security: Press the OK key to activate or deactivate phone lock, the current
status is displayed in a dialogue box when you scroll to this option. To activate phone lock,
you will be asked to enter the phone password. If activated, you will be required to enter
the phone password every time you turn on the phone. Please consult with your service
provider for more details.
Note: The default phone lock code is 1122. Please change your initial phone code promptly.
The above code should be set in the format, such as 0000~00000000.
Restore factory settings