College Bed Lofts Bench Loft Bed User manual

Bench Loft Bed Assembly Instructions
The Bench Loft Bed options include (1) or (2) Benches
and a Table. The photo (left) shows the completed bed
with (2) Benches and the Table.
Parts Bag:
(40) 1-1/4” Screws
(50) 2-1/2” Screws
(10) 1-5/8” Screws
Attach the Leg Supports to the inside bottom of the legs with 2-1/2” screws into the
pilot holes. The bench will rest on top of these supports.
The Bench Seat comes with the
frame and top attached. Place the
bench face down on the floor and
attach the legs to the frame with 2-
1/2” screws into the pilot holes.

The Bench Seat rests on the leg supports. Attach the bench to the legs wit 2-1/2” screws into the pilot holes.
Attach the Seat Back to the legs from behind into the legs with 1-5/8” screws. You can place it 2” - 3” above the bench.