College Bed Lofts Multi-Width Bunk Bed with Angled Front Ladder and Drawers or Trundle Bed... User manual

Page 1 of 2
Multi-Width Bunk Bed with Angled Front Ladder
and Drawers or Trundle Bed Underneath 5/21/21
The Ladder Support raises the ladder above the
mattress height. It needs to be attached before
the bed slats for the bottom bunk are attached.
Picture of the Ladder Support. It will attach to the
front rail using (2) 8” carriage bolts through the holes
drilled in the front rail.

Page 2 of 2
Attach the Ladder Support to the front rail using the 8”
carriage bolts using the same arrangement for the nuts and
washers as for the top bunk.
From the back of the front rail, use 3” screws to attach the
Ladder Support to the Front Rail.
From underneath the top of the Ladder Support use 2-1/2”
screws to attach to the bottom of the ladder.
Lastly follow the assembly instruction to attach the top of
the ladder to the top bunk.