Colorado time systems WHC-2 User manual

Wireless Handheld
Segment Timer Controller
User Guide
F1050 Rev. 201904
Customer Service Department
www.coloradotime.com
Email: [email protected]
Phone: [phone]
Toll Free U.S. /Canada 800-287-0653
Fax: [phone]

Manufacturer:
Everlast Climbing Industries, Inc.
DBA Colorado Time Systems
1551 East 11th Street
Loveland, CO 80537 USA
Sales : 1-800-279-0111 or [phone]
Service: 1-800-287-0653 or [phone]
Service Fax: [phone]
Web: www.coloradotime.com
Email: [email protected]
Product Identification
Product: Handheld Segment Timer
Model Number: WHC-2
Information in this manual is subject to change without notice. Pictures and illustrations
may not accurately depict your version. Please check our website for the most current
information; our user manuals are available online in the customer service section of our
website.
Part Number F1050, Rev. 201904
©2019 Colorado Time Systems. All rights reserved.

Contents
Wireless Handheld Segment Timer Controller......................................................1
Product Description ........................................................................................................ 1
Quick Start...................................................................................................................... 2
Menu............................................................................................................................... 2
Interval Timing ............................................................................................................... 4
Programming the sets and reps................................................................................... 4
Running the set ........................................................................................................... 6
Conformity...................................................................................................................... 7
North America ............................................................................................................ 7
European Declaration of Conformity.......................................................................... 8

1 Wireless Segment Timer
Product Description
The Segment Timer Handheld Controller can control Colorado Time
Systems multi-sport displays that have four-digit time.
4-digit slim pace clocks display the minutes and seconds of the rep
(01:12 in the examples shown).
6-digit slim pace clocks, deck clocks and portable scoreboards
display the minutes and seconds of the rep as well as the rep number
(2 in the examples shown).
The segment timer can be programmed to control up to 10 programmable sets of up to 50
Reps.
The unit runs on 2 AA batteries; CTS recommends rechargeable batteries. Expected life
for a pair of batteries is 8 hours.

2 Wireless Segment Timer
Quick Start
Power On and Off
Turn the controller on by pressing and holding the “-”key . The unit will show the
CTS logo and then display the Rep screen.
Turn the controller off by entering the menu and selecting Off.
Navigation, Arrow Keys and Enter Key
To navigate on the screen use the arrow keys
and the Enter key
in the middle of the arrow keys.
Menu
MENU
At the top of the screen is the word “MENU”. You can display the menu screen by using
the arrow buttons to highlight the word MENU (if it is not already highlighted) and then
pressing the enter key.
Note –You cannot enter the menu screen while the clock is running. Stop the
clock with the red Stop key if you want to enter the menu.
The main menu consists of three different items. Use the arrow keys to highlight the
preferred function and press the enter key in the middle.
Time of Day –This function lets you set the time of day on the controlled pace clock.
When a pace clock is on while its controller is turned off, the pace clock will display time
of day. To set, simply highlight this function with the arrow keys. Next, use the arrow
keys to highlight
Mode –Pressing enter alternates between 12-hour mode and 24-hour mode.
Time –To change the time of day, use the arrow keys to highlight the time and
use the “+” and “-” keys to adjust the hours or minutes.

3 Wireless Segment Timer
SET/CANCEL –Highlighting “SET” and pressing Start will save any changes.
Highlight Exit at the top of the screen and press enter to return to the Rep screen.
Highlighting “CANCEL” and pressing Enter will return you to the main menu
while ignoring any changes made on the Time of Day screen.
Connection –This function takes you to a sub-screen where you can modify the wireless
connection parameters. The handheld controller must match the channel, PAN ID, and
module of the pace clock it is controlling, as displayed on the pace clock at power on.
The pace clock will test the LED segments, and then cycle through a display of Channel
(indicated with “C”), PAN (indicated with “P”) and Module Address (indicated with
“A”).
If it is necessary to change these settings, use the arrow keys to highlight the
desired parameter and then press Enter to scroll through the different options.
You can set the following items by highlighting the item with the arrow keys and
changing the values with the enter key:
PAN ID: From 0 to 15
Channel: From 0 to 11
Module: From 1 to 6
Version: Shows the firmware version
Program mode -> puts the device into a mode to wirelessly update the firmware
(Use only if directed to by a CTS technician.)
CAUTION: If the handheld controller is set to different settings than the pace clock, the
board won’t receive any data.
To return to the Rep screen, use the arrow key to highlight “EXIT” at the top of the
screen and then press the Enter key .
Off –Use the arrow keys to highlight “MENU” and then highlight “OFF”
and then press the Enter key .

4 Wireless Segment Timer
Interval Timing
The segment timer allows you to create up to ten sets of one to fifty Reps.
Programming the setsand reps
(Up to 10 programmable sets and 50 programmable Reps)
1. Use the blue right arrow and up arrow keys to navigate the screen and
highlight the word “SET”and use the Enter key to select the “SET”menu.
2. While in the SET menu:
a. Use the blue arrow keys to navigate between one and ten sets.
b. To copy and paste a selected set, use Start to toggle between
copy/paste functions.

5 Wireless Segment Timer
c. To clear a selected set, use Stop to select Clear, and then Start
to select Clear. Use Cancel to deselect a set.
d. Use the Enter key to select a set and display the Rep screen for that
set.
3. In the Rep screen use the double up arrow key to scroll up a page and the
double down arrow key to scroll down a page.
4. Use the blue up down arrow keys to navigate the selected Rep screen
and Enter to select a Rep to edit
5. Use the blue right left arrow keys to select a Rep time category. Use
the “+” and “-“ keys to increment/decrement the selected time..
Hours can be set from 0-99
Minutes can be set from 0-59
Seconds can be set from 0-59
6. Each Rep can be set to Count Up or Count Down by using the “-“or “+” keys
when selecting the count up /count down toggle symbol.

6 Wireless Segment Timer
7. Beep can be programmed from 0-9 seconds by selecting the beep numeral and
using the “-“or “+”keys .
8. Choose the next Rep by selecting the Rep numeral and using the “-“ and “+” keys
.
Running the set
1. Use the arrow keys to select the first Rep in the set.
2. Select Start to run the set.
3. Select Stop to stop the set.
4. Select Reset to restart a Rep.
Beep Numerals

7 Wireless Segment Timer
Conformity
North America
FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Contains FCC ID: OUR-XBEEPRO
Contains Model XBee-PRO Radio, IC: 4214A-XBEEPRO

7 Wireless Segment Timer
European Declaration of Conformity
We, Everlast Climbing Industries, Inc.
DBA Colorado Time Systems
1551 E 11th Street
Loveland, CO 80537, USA
++1 970 667 1000
www.coloradotime.com
declare under our sole responsibility that the
Product: Wireless Handheld Controller
Model numbers: WHC-X
to which this declaration relates is in conformity with the following European Directives:
European Council Directive 2006/95/EC (December 12, 2006) on Low Voltage
Equipment Safety.
CENELEC EN 60950-1Issue:2006/04/01, CENELEC EN 60950-22 Issued:2006/04/01
European Council Directive 2004/108/EC (December 15, 2004) on
Electromagnetic Compatibility.
CISPR 22 Issue:2008/09/24, CISPR 24 Issue:2010/08/24
European Council Directive 2011/65/EU (July 21, 2011) on the Reduction of
Hazardous Substances (RoHS).
European Council Directive 2002/96/EC 27 January 2003 on waste electrical and
electronic equipment (WEEE).
The Technical Construction File is maintained at the corporate headquarters of Colorado
Time Systems in Colorado, USA.
Date of issue: Jan. 28th, 2019
Place of issue: Loveland, Colorado, USA
X
Michael Medina-Brodsky
Director of Operations

Customer Service Department
www.coloradotime.com
Email: [e-mail]
Phone: [phone]
Toll Free U.S. and Canada 800-287-0653
Fax: [phone]