
C0000-10-30 Rev. A (Updated: 9/11/07
1
PVC Walker Chair Instructions
Models #2710
(w/Optional Side Stabilizers)
2720
(w/Standard Wide Extended Base)
MODEL #2710
MODEL #2720
Thank you for Choosing Columbia
Your Columbia PVC Walker Chair has been built to the highest standards of quality to ensure years of superior
service. Please take the time to read this informative instruction guide and pay particular attention to the
safety information provided. Thank you again for choosing Columbia!
Important Safety Instructions
When using your, PVC Walker Chair always take basic safety precautions to reduce the risk of injury to
persons.
1. Read and understand all instructions.
2. Determine, with a physician or therapist, the suitability of this product for the intended user.
3. Do not leave user unattended unless you have determined that their abilities and requirements are such
that it poses no safety risk to leave them unsupervised.
4. Place your PVC Walker Chair on a level surface; do not use near steps or other hazards.
5. Keep your PVC Walker Chair clean and sanitary.
6. Check regularly that all bolts, casters, caster locks engage properly, footrest and other parts are tight and
in good working order.
Save These Instructions
Assembly of Model #2710 & 2720 PVC Walker Chairs
Top and Bottom Frame
1. Your PVC Walker Chair is shipped with Top Frame separate from Base Frame. This step requires two (2)
persons to install top to bottom frame. Once you have determined your exact height, install the Quick-
Release pins.
2. All four (4) Quick-Release pins must all be properly set and locked before using your PVC Walker Chair. (See
images below):
Shown w/Model
#2720