Combi-Camp minik 10 User manual

electronic cam lock
cabinets lockers carts
OPERATING MANUAL
Please read this manual
before using the miniK 10
TM

INDEX
Introduction_ __ _ ___ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ _3
Operating Modes _ _ __ _ ___ __ _ _ _ __ _ __ _ __ _ __ _ __ _ __ ___ 4
Single User Mode _ _ __ _ ___ __ _ __ _ __ _ ___ __ _ __ _ __ __ __ __4
Opening With User Password_ _ __ _ __ __ ___ __ _ __ _ __ _ ___ __4
Changing User Password _ _ __ _ ___ __ _ __ _ __ _ ___ ___ ___ __ 5
What Happens if User Forgets Their Password?__ _ __ _ ___ __ 5
Multiple User Mode (Locker Mode / One Time Use Mode) __ _ __5
Service Password _ _ ____ _ __ _ ___ __ _ __ _ __ _ __ _ __ _ __ ___ 6
Opening With Service Password _ __ _ __ _ __ _ __ _ __ _ __ __ 6
Changing Service Password __ _ __ _ ____ __ _ __ _ __ _ __6
Master Password _ _ __ _ ___ __ _ __ _ __ _ ___ __ _ __ __ _ __ _ _ _6
Opening With Master Password _ _ __ _ __ _ __ __ _ __ _ __ _ __ 6
Changing Master Password __ ___ __ _ __ _ __ _ ___ __ _ __6
Programming the miniK 10 _ ___ ___ __ _ __ _ __ _ __ _ __ _ __ _ __7
Accessing The Program Menu _ __ _ ___ __ _ __ _ __ _ ___ __ _ __ 7
Program Option Definitions _ _ __ _ ___ __ _ __ _ __ _ ___ ___ _ _ __8
Light And Audio Notification_ _ __ _ __ _ __ _ __ _ __ _ __ _ ___ __ 8
Changing The Battery_ _ __ _ ___ __ _ __ _ __ _ __ __ _ __ _ __ _ __ 8
Maintenance _ _ __ _ ___ __ _ __ _ __ _ ___ __ _ __ _ __ _ __ _ __ _ __ 9
General Warnings _ _ __ _ ___ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ _ 9
Cams _ __ _ _ __ __ _ __ _ __ _ ___ __ _ _ _ __ _ _ __ _ __ _ __ _ __ _ _ 9
Other _ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ _ __ _ 9
Quick Info___ _ __ _ __ _ __ _ __ _ __ _ __ _ ___ __ _ __ _ __ _ _ __ _10
FJM Limited Warranty _ _ __ _ __ _ __ _ __ _ __ _ _ __ _ _ __ _ __ _ 11
Liability Limits _ _ __ _ __ _ __ _ __ _ __ _ _ __ _ _ __ _ __ _ __ _ __11
Technical Specifications _ _ __ _ __ _ __ _ __ _ __ _ _ __ _ _ __ _ __11
Thank You _ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __11
Other Products In The Combi - Cam _ _ __ _ __ _ __ _ __ _ _ __ _12

INTRODUCTION
1. Red LED
2. Green LED
3. Keypad
4. Lock Body
5. Closing Position
6. Handle Indicator
7. Opening Position
8. Handle
9. Mounting Nut
10. Lock Body
11. Battery Cover
12. Battery Cover Screw
13. ID Label
14. Hand Knob Frame
15. Cam
16. Cam Screw
17. Cylinder Nut
7
Back
Front
3
1
2
5
6
4
8
7
15
11
12
15
9
14
16
17
13
10
Page 3

Combi-Cam E - electronic cabinet lock with master/manager code, one-
time-use functionality, and up to 10 years battery
life. Combi-Cam E can be installed for both right and
left hand installations - anywhere that
needs flexibility of master/manager codes.
The eco-friendly miniK10 offers both con-
venience of far lessfrequent battery chan-
ges and a more environmentally friendly
solution.
PASSWORD LEVELS:
The Combi-Cam E has three potential password levels -
1. User password
2. Service password (must activate in Program 5.1)
3. Master password
The user and master passwords should be changed prior to installation
and tested. Write down new passwords and keep in a safe place. It is not
possible to open lock if you forget your password.
OPERATING MODES:
The Combi-Cam E can operate in two different modes:
1.Single User (factory default)- Set password and user will open lock each
time with same password.
2.Multiple User Locker Mode - user enters in their code when lock is in
unlocked position, rotates handle to lock. Upon returning uses same code
to open. Next user can repeat the process with their own unique password.
SINGLE USER MODE
OPENING WITH USER PASSWORD:
1) Enter your 4-digit user password.On first use factory default is <1-0-1-0>
2) Rotate handle within 5 seconds to opening direction and there will be a
confirmation beep.
User Password
1 2
Below illustrations show examples of lock installed
for right handed door. Lock can be installed for left or
right handed
Page 4

CHANGING USER PASSWORD:
If single user mode is selected (default), press password. Press
button again and enter new 4-digit user password. Press button again
and approve new password. You will get a confirmation beep and green
LED light will blink.
MULTIPLE USER MODE (LOCKER MODE / ONE-TIME-USE MODE)
In multiple user mode, opening and closing with a password process is
same as Single User. However, each time lock is in open position, each
user enters in their own unique 4-digit code to lock and then use that same
code to again open the MiniK10. Popular application is for gym lockers.
NOTE: Lock is open, first user enters in <3-4-2-8> and closes lock.
They return and enter the same <3-4-2-8> to open the lock. Lock is open,
next user enters in their code of <7-8-5-2>, closes lock and so on.
ATTENTION:
By default, the miniK10 is set to individual use mode. The miniK10 can
easily be set to one-time-use (locker mode) with either of the two below
steps:
1. Before battery tab is removed, hold down # 1 key, pull the tab and key
the # 1 key pressed 3 seconds
2. Convert lock to one time use at any time by entering in
# MasterCode *1 1
NOTE: WHAT HAPPENS IF USER FORGETS THEIR PASSWORD?
Locker Mode (Multiple User):
Use Master code to unlock and turn handle to open position. Lock is now
ready for next user to enter in their unique code.
Single User Mode:
1) Use master code to reset the lock to factory defaults.
# MasterCode * 4 0
2) Default user code is now < 1-0-1-0 > and can be changed.
OLD USER NEW USER
Page 5

SERVICE PASSWORD: By default, service password is not active. Activate
with Program 5.1. Service password allows lock to be opened only and
none of lock features can be programmed.
OPENING WITH SERVICE PASSWORD: Default - <1-0-1-0-1>
If service password function is active, 1) press button and enter current
5-digit service password and press button.2) Rotate handle within 5
seconds to opening direction. You will get a confirmation beep from lock
and green LED light will blink.
CHANGING SERVICE PASSWORD:
When you have selected service password in program menu, press
button twice and enter current 5-digit service password. Press
button again and enter new 5-digit service password. Press button again
and approve new password. You will get a confirmation beep from lock and
green LED lights will blink.
MASTER PASSWORD: Opens lock and grants access to all programming
features.
OPENING WITH MASTER PASSWORD: Default - <1-0-1-0-1-0>
1) Press the button and enter current 6-digit master password and press
button. 2) Rotate handle within 5 seconds to opening direction.
You will get a confirmation beep from lock and green LED light will blink.
OLD SERVICE NEW SERVICE
SERVICE PASSWORD
1 2
MASTER PASSWORD
1 2
CHANGING MASTER PASSWORD: Set new master password and test
BEFORE installing lock. Press button twice, and then enter old 6-digit
master password. Press button again and enter new 6-digit master
password. Press button again and approve new password. You will get
a confirmation beep from lock.
OLD PASSWORD NEW MASTER Page 6

PROGRAMMING THE miniK 10
The miniK 10 can be customized from factory default settings tailored to
your needs.
ACCESSING THE PROGRAM MENU:
Press the button and then enter the 6-digit master password. Press the
button. Press the program number that you will make an adjustment to
and then press the adjustment selection.
1
1
0
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
01
Penalty active (lock blocked for 5 minutes if wrong code entered 3 times)
Explanation:
0-1 Restores factory default settings:
Prg No 1-: Individual operation
Prg No 2-1: Audible beeps and confirmations
Prg No 3-0: Penalty operation is not active
Prg No 4-0: Sets user password to factory default
Prg No 5-0: Service password is not active
Prg No 6-1: Closing without password active
Prg No 7-0: Warning of open door is not active
Prg No 8-0: Resetting user password is not active
Prg No 9-0: Blocking of the lock is not active
One-time-use operation (locker mode for multiple users)
Individual operation
Mute operation except for warnings
Audible operation- button feedback, warnings and confirmations
Penalty not active
Sets user default code to factory default (for forgotten combinations)
None
Service password is not active
Service password is active
Closing with password required is active
Closing without password is active (for individual usage)
Warning of door open is not active
Warning of door open is active (beeps 8 times every 5 seconds)
Resetting user password is not active (if service password is active)
Resetting user password is active (if service password is active)
Blocking of the lock is not active (if service password is active)
Blocking of the lock is active after using service password (if it is active)
Page 7
MASTER PASSWORD
NOTE: To the right would
change to password being
required to close lock
(factory default in individual
mode is no password
60
PROG.
NO
SELECTION
NO

PROGRAMMING OPTION DEFINITIONS:
0Restoring factory settings: All factory default settings are restored (see program
menu). User password becomes <1-0-1-0> and master password becomes <1-0-
1-0-1-0>.
User code reset : Sets user factory default to <1-0-1-0-1-0>.
Penalty operation: Prevents tampering of lock by unauthorized people. Lock is
blocked for 5 minutes if wrong password is entered three times consecutively.
Factory default is that this feature is not active.
Service password: Lock can be opened with service password if user password
is forgotten. Factory service default password is <1-0-1-0-1>. No programming
features can be accessed with service password. Factory default is that this feature
is not active.
Closing modes: Factory default - miniK 10 does not require a password to lock. The
other option is it can require a password to lock.
Door open warning: After door is open for one minute, lock gives an audible
warning to user with 8 beeps every 5 seconds to notify user that the door has
been left open.
Resetting user password: If the lock is opened with service password (and
service password is active), user password can be reset. (see program #5 on
service passwords). Factory default is that the service password access does
not allow the user password to be reset (only opens up the lock).
Blocking the lock: If lock opened with service password, it can be blocked from
further user password access.This would. insure service password is only used
to access locks for emergency lockouts. Master password access would then be
required to set up user password again (0-1 Factory default reset). Factory default
is that this feature is not active.
Individual use or locker mode: Factory default is individual mode. Individual use
mode allows one 4-digit code to be entered that would remain the same code for one
user. Locker mode is for multiple users whereby each user walks up to an open miniK
10 and enters in their own unique code to close the lock and then to open it again.
When open, next user enters in a new code, etc.
Audible volume control: All audio warnings can be turned off if mute operation
is selected (except warning beeps).
LIGHT AND AUDIO NOTIFICATION:
Password is accepted:
Wrong password:
Low battery:
Lock is open:
Green LED lights with two repeated audio warnings
Red LED lights with four repeated audio warnings
Red LED lights blink 5 times after each operation
1 minute after door is opened, lock gives audible
warning 8 times every 5 seconds
CHANGING THE BATTERY:
Lock operates on a 3V lithium coin cell CR2450 battery located on back
side of device. Remove screw located on cover of battery and replace it
with new battery. Battery life is up to 10 years. The red LED light blinks 5
times after each operation when battery is low and it is possible to open.
Page 8

MAINTENANCE:
- Clean front of lock with a mild damp cloth with detergent if needed.
- Do not use any hard or scratching cleanser.
- Do not clean with chemical materials that melt plastic (thinner, acetone, etc.)
- Be careful not to spill water on lock.
GENERAL WARNINGS:
CAMS:
- Two cams are included-
- Cams can be placed at
increments of 90 degrees
- The Stop Cam (#4) in
installation instructions
can be positioned for turning
the cam clockwise or counter-clockwise
OTHER:
Battery failure override- The miniK 10 has 2 external nodes surrounding the
red and green indicator lights where an external battery can be connected
long enough to enter in the correct code to open the lock allowing new batteries
to be installed. For more detailed instructions, go to www.combi-cam.com/E/
Cam
Placement
Page 9
7/8" Straight Cam
22mm
1-1/2" Straight Cam
38mm
- Read manual before using lock.
- Periodically check nuts and screws to be tightened.
- Do not over-tighten nuts or screws. Do not use an electric screw gun
during installation unless equipped with a torque adjuster.The maximum
torque on the cylinder screw is 25Nm.
- Set and test user and master passwords prior to installing the lock
- Change all default passwords with your own passwords.
- Common sense, but we must say it... Do not keep the passwords in
the cabinet where the lock is being installed!
- It is not possible to open lock if installed and you forget the user and
master password.
- Lock gives a warning beep when incorrect passwords have been
entered in repeatedly.
- Not possible for front side of lock to be opened by breaking or trying
to force open lock.
- Use CR2450 3.0V Lithium batteries.
- Remember that battery consumption is high when programs 2, 3, and
7 are active.

ATTENTION:
These are default
settings by the
factory.
Once they are
changed, be sure
to write down
your new code!
Opening direction depends on which to type of door MiniK10 is
installed. All opening illustrations depict right handed door
installation.
IF SERVICE PASSWORD
ACTIVE
USER PASSWORD
MASTER PASSWORD
OPEN WITH USER PASSWORD
MASTER PASSWORD
Page 10
QUICK INFO
USER PASSWORD
OPEN/CLOSE WITH USER PASSWORD
DEFAULT PASSWORD NEW PASSWORD
CHANGING USER PASSWORD
DEFAULT PASSWORDS
CHANGING MASTER PASSWORD
DEFAULT PASSWORD NEW PASSWORD

for purchasing our product and dramatically reducing the number of batteries
headed to the landfill! In the US alone 3 billion batteries are tossed into
landfills per year! Batteries contain many hazardous elements such as
mercury, lead-acid, nickel-cadmium, all which release into the soil when
not properly recycled. Please play your part by finding the nearest location
to recycle your batteries or miniK 10 at Earth911.com.
Thank you
FJM LIMITED WARRANTY:
FJM Security offers a one year limited warranty all products to be free from
manufacturing defects in materials and workmanship. This warranty does
not cover the battery, lost combinations or damages caused by improper
mounting, improper or unreasonable use.
LIABILITY LIMITS:
This is a limited warranty and is in lieu of all other warranties (including the
implied warranties of merchantability and fitness for use) and under no
circumstances shall FJM Security Products be liable for any incidental or
consequential damages or losses.
ATTENTION: (*)(Battery life may vary in accordance with battery brand ,
programming parameters and environmental conditions of the product is
used.)
ATTENTION: Remember to write down your passwords after programming
and prior to installing lock.It is not possible to open lock if it is in installed and
you forget your passwords.
ATTENTION: miniK 10 is made for only interior usage.
Page 11
TECHNICAL SPECIFICATIONS:
2.5 oz (71 g) (excluding cam and mounting)
20% - 80% Rh (without condensation)
Battery Life (*) 10 years (for 10 uses a day)
Weight
Key Pad
Operating Temperature
Storage Temperature
Operating Moisture
Replaceable Battery
Silicone Keypad with metal dome
14 - 158 F (-10 - 70 C)
3V Lithium CR2450
32 - 122 F (0 - 50 C)

Copyright 2013 FJM Security Products
AOO.20130923 050 037 1055
Patent pending
NOTE : For more detailed
instructions and video
demos, go to
www.combi-cam.com/E/