Comelit IP 100 SERIES User manual

1
NVR IP 100 SERIES
Please read this manual thoroughly before use and keep it for future reference

2
Contents
1.Menu operation ....................................................................................................................................... 4
1.1 Local Operation Guide.................................................................................................................. 4
2. Start/ Shutdown System......................................................................................................................... 4
2.1 Main menu-Start (Power off, Reboot, Login, Logout)................................................................... 4
3. Preview................................................................................................................................................... 5
4. IP Channel setting.................................................................................................................................. 6
4.1 Search IPC.................................................................................................................................... 6
4.2 Add IPC automatically................................................................................................................... 7
4.3 Add IPC manually......................................................................................................................... 7
4.4 Channel parameters modification................................................................................................. 8
4.5 Modify IPC Parameters................................................................................................................. 9
4.6 Delete IPC................................................................................................................................... 10
5 System configuration setting................................................................................................................. 11
5.1 Device parameters setting.......................................................................................................... 11
5.2 Channel parameters setting........................................................................................................ 12
5.2.1 Display Setting.................................................................................................................. 12
5.2.2 Video Parameters............................................................................................................. 13
5.2.3 Schedule Record.............................................................................................................. 14
5.2.4 Motion Detection............................................................................................................... 15
5.2.5 Video lost.......................................................................................................................... 17
5.2.6 Tampering Alarm.............................................................................................................. 18
5.2.7 Video Mask Setting........................................................................................................... 19
5.3 Network parameters setting........................................................................................................ 20
5.3.1 Network Setting ................................................................................................................ 21
5.3.2 DNNS Setting ................................................................................................................... 24
5.3.3 NTP Setting ...................................................................................................................... 25
5.3.4 Email Setting..................................................................................................................... 26
5.4 Alarm&Exception......................................................................................................................... 26
5.4.1 Alarm Input........................................................................................................................ 27
5.4.2 Alarm output ..................................................................................................................... 28
5.4.3 Exception.......................................................................................................................... 29
5.5 Account Setting........................................................................................................................... 29
5.5.1 User information Setting ................................................................................................ 30
5.5.2 User Online Checking....................................................................................................... 31
5.6 System administration................................................................................................................. 32
5.6.1 Device Log........................................................................................................................ 33
5.6.2 Stream Info. ...................................................................................................................... 33
5.6.3 HDD Setting...................................................................................................................... 34

3
5.6.4 System Update................................................................................................................. 34
5.6.5 Auto Reboot...................................................................................................................... 35
5.6.6 Recovery Configuration.................................................................................................... 35
6. PTZ control........................................................................................................................................... 35
7. Manual record ...................................................................................................................................... 36
8. Manual snapshot.................................................................................................................................. 37
9. Video Playback..................................................................................................................................... 37
10. Screen Display Setting....................................................................................................................... 38
11.Video Backup Setting.......................................................................................................................... 39
12. Alarm setting ...................................................................................................................................... 40
13. File Manage........................................................................................................................................ 40
14. Image Setting..................................................................................................................................... 41
15.Screen Aspect Ratio/Segmentation.................................................................................................... 42

4
1.Menu operation (default Username: admin / Password:none)
1.1 Local Operation Guide
As picture：
2. Start/ Shutdown System
2.1 Main menu-Start (Power off, Reboot, Login, Logout)
1）Start up：Switch on the power source correctly, and start up the devices
2）Power off：Click"Power off" , the device will shutdown
3）Reboot：Click "Reboot" ,the device will reboot automatically
4）Logout: Click"Logout" , the device will logout

5
3. Preview
Start up the devices, after successfully login the following interface will appear:

6
4. IP Channel setting
4.1 Search IPC
At the page of "IP Channel Setting" , click "Search", the local area network IPC will
appear, and do basic parameters modify , as shown in the below picture:

7
4.2 Add IPC automatically
Mark the needed IPC in the "Search menu", the configuration of IP camera will add to
the left channel automatically, then click"save", as shown in the below picture:
（Note：Click "ALL" will add the search menu camera to the left channel in turn）
4.3 Add IPC manually
■Click "√" in front of "Enable" at the channel item
■Select relevant protocol
■Input the IP address

8
■Input the port number
■Input the user name
■Input the IPC password, and click "Save" finally
4.4 Channel parameters modification
Double-click the channel parameters which needed to modify on the left "Channel
menu", then input relevant parameters, click"Save", as shown in the below picture:
1）Enable: Select the relevant channel, check "Enable"
2）Protocol: ONVIF Standard protocol/ I8 Private protocol/ I9 Private protocol/ RTSP
Standard protocol for selection
3）IPAdd：Edit and modify the IP address manually
4）Port：Edit and set the relevant port number
5）Stream Type: Select "Main Stream" or "Sub Stream"
6）Network type：Select“TCP”or“UDP”
7）User ：Input the user name
8）Password：Fill the password in the password field

9
4.5 Modify IPC Parameters
Double-click the channel parameters which needed to modify on the " Channel menu",
then fill in the relevant parameters, click "Modify", as shown in the below picture:

10
4.6 Delete IPC
Mark the IPC parameters which needed to delete, then click"Delete", as shown in the
below picture:

11
5 System configuration setting
5.1 Device parameters setting
Click "Device parameters" on the "Device Info." interface, then view and modify the
relevant basic information, as shown in the below picture:
1）Device Info.：Check and modify the basic information

12
2）System Version：Edit the system version number
3）PTZ Setting：Modify the access dome cameras parameters
4）DST Setting: Enable and set DST parameters
5.2 Channel parameters setting
5.2.1 Display Setting
Select the relevant channel and modify the parameters on the "Display Setting"
interface, as shown in the below picture:
1）Channel：Modify the specified channel name
2）Local camera name：Modify the input devices channel name for specified channel
3）Time format：Select time display mode for the access devices
4）Date format：Select date display mode for the access devices
5）OSD Position：Set different display position for the access devices name and
display-time
6）Image Setting：Adjust the access devices brightness and contrast
（Note：Except 1）, other options only efficient for privacy protocol equipments)

13
5.2.2 Video Parameters
Modify the relevant channel video parameters on the "Video Parameters"
interface,as shown in the below picture:
1）Channel：Select the channel number
2）Encoding Type: Mani stream/ Sub stream/ Main stream(Event) for selection
3）Stream type：Video&Audio/Video optional
4）Resolution：Several kinds of resolution which IPC supported
5）Bit rate Type: CBR/VBR optional
6）Bit rate: Select relevant bit rate which needed
7）Frame Rate: Select different frame rate from the drop-down list, "FULL"default.
8）Video quality: Different level video quality optional, "Highest" default.
（Note: " Video setting" will be directly modify the IP cameras parameters, and only valid for
private protocol linkage channel）

14
5.2.3 Schedule Record
Modify each video channel parameters on the "Schedule Record" interface,as
shown in the below picture:
5.2.3.1 Video precise backup
Double-click the time bar to set precise video backup, there will be a small check
appear, and then double-click the small check, the following interface will pop-up(The check
box in front of "All Day Recording" can not mark ):
5.2.3.2 Record time
Click "Setting" to do period time recording on the "Schedule " interface, as shown in the
below picture:

15
（Note：It can set 8 periods video recording mode during one day）
5.2.3.3 Advanced Record
Set relevant advanced recording parameters for each channel on the " Advance"
interface, as shown in the below picture:
5.2.4 Motion Detection
（Note：Fore-end IP Camera must support motion detection)
Modify each video channel parameters on the "Motion" interface,as shown in the
below picture:

16
1）Click "√" in front of "Enable Motion Detection"
2）Set motion areas, as shown in the below picture:
3）Adjust sensitivity volume
4）Set arm schedule
5)Select trigger mode, as shown in the below picture:

17
5.2.5 Video lost
Modify each video channel parameters on the "Video lost" interface,as shown in the
below picture:
1）Click "√" in front of "Enable Video Lost"
2）Set arm schedule

18
3）Select trigger mode, as shown in the below picture:
5.2.6 Tampering Alarm
（Note：Fore-end IP Camera must support tampering alarm)
Modify each video channel parameters on the "Tampering Alarm" interface,as
shown in the below picture:
1）Click "√" in front of "Enable Video Tampering"

19
2）Area setting, as shown in the below picture:
3）Set arm schedule
4）Select trigger mode, as shown in the below picture:
5.2.7 Video Mask Setting
Modify each video channel parameters on the "Video Mask" interface,as shown in
the below picture:

20
1）Click "√" in front of "Enable Video Mask"
2）Set mask areas, as shown in the below picture:
5.3 Network parameters setting
Set the relevant parameters according to the need on the "Network" interface, as
shown in the below picture.