comfortel COLOUR STATION II User manual

#8430 COLOUR STATION II
#8432 COLOUR STATION WITH SINK
#8435 TINT TUBE WALL CABINET
colour
bar area
For best practice on installing and maintaining your Comfortel product.
Specific adjustments vary according to each model.
comfortel.com.au
owners manual

GENERAL SAFETY
1. Read carefully and keep these instructions in a
safe place.
2. Use this product only for its intended function and
do not use attachments not recommended by the
manufacturer.
3. Do not use outdoors.
PLUMBING
Product #8432 must be installed by a licensed plumber.
THIS MANUAL IS FOR
ABOUT IMPORTANT PLEASE READ
THESE SAFETY INSTRUCTIONS
COLOUR BAR
A dedicated colour area
With our customised Colour Bar Area you can choose
your preferred combo set that creates an area that can
be incorporated into the salon.
Easily organise your range of colours in a professional
way, with ample storage, a stainless steel sink option
with a black textured wood grain finish.
COLOUR STATION II
Cabinet for Colour Bar Area
COLOUR STATION II WITH SINK
Cabinet for Colour Bar Area
TINT TUBE WALL CABINET
Holds up to 132 x100g colour tubes
W x D x H: 780mm x 480mm x 920mm
Colour: Wood Grain Black
W x D x H: 780mm x 480mm x 920mm
Colour: Wood Grain Black
W x D x H: 760mm x 300mm x 760mm
Colour: Textured wood grain Black
STYLE NUMBER #8430
STYLE NUMBER #8432
STYLE NUMBER #8435
ALL PLUMBING MUST BE COMPLETED
BY A LICENSED PLUMBER
IMPORTANT

#8435
TINT TUBE
WALL CABINET
#8441
#8442
#8443
#8435
TINT TUBE
WALL CABINET
#8435
TINT TUBE
WALL CABINET
#8430
COLOUR STATION
#8430
COLOUR STATION
#8432
COLOUR STATION
WITH SINK
#8432
COLOUR STATION
WITH SINK
COLOUR STATION
COMBO ONE
COLOUR STATION
COMBO TWO
COLOUR STATION
COMBO THREE
POSITIONING: COMBO COLOUR BAR SUGGESTIONS
x2
x1
x1
x1
x1
x1
x1

GET STARTED: POSITIONING & SIZE
IMPORTANT:
ALL PLUMBING MUST BE COMPLETED BY A LICENSED PLUMBER
PLUMBING ACCESS OPTIONS FOR COLOUR STATION WITH SINK
DETERMINE THE BEST WAY TO CONNECT PLUMBING. FLICK MIXER TAP SET NOT SUPPLIED
Open each box and position the colour bar in your salon or space, allowing for height of top units.
Colour Station must be fixed to a wall. Allow for the necessary room in front of the unit for access.
480
300
800 760100 100 800100 100
780
760
760
Wall
480
Colour Station II
(no sink)
Colour Station II
With Sink
Wall
780 780
Shows 2 x colour stations with combination of sink and no sink
SIDE VIEW FRONT VIEW
TOP VIEW

ASSEMBLY
x4
x4
x12 x2
x4 x6
1
13
2
3
4
5
6
7
8 10
11 12
9
x4
x4
x12 x2
x4 x6
1
13
2
3
4
5
6
7
8 10
11 12
9
PARTS
1 Splashback
2Bench top
3Dowls (if present, please remove
and discard - not required)
4Fixed panel
5Cupboard
6Kick board
7Feet x4
8Lock and cam x4
9 Cam cover x4
10 L bracket x6
11 Screws x 24
12 Large screws x2
13 Basin
Please note: Taps and plumbling items
are not supplied.
x4
x4
x12 x2
x4 x6
1
13
2
3
4
5
6
7
8 10
11 12
9
#8432 COLOUR STATION WITH SINK
IF DOWELS ARE PRESENT, PLEASE REMOVE
& DISCARD OF AS THEY ARE NOT REQUIRED.
IMPORTANT
IF DOWELS ARE PRESENT, PLEASE REMOVE
& DISCARD OF AS THEY ARE NOT REQUIRED.
IMPORTANT
x4
x4
x12 x2
x4 x6
1
13
2
3
4
5
6
7
8 10
11 12
9
PARTS
1 Splashback
2Bench top
3Dowels (if present, please remove
and discard - not required)
4Drawers
5Cupboard
6Kick board
7Feet x4
8Lock and cam x4
9 Cam cover x4
10 L bracket x6
11 Screws x 24
12 Large screws x2
1
2
3
4
5
x4
6
7
x4
x4
x12 x2
x4 x6
1
13
2
3
4
5
6
7
8 10
11 12
9
#8430 COLOUR STATION

INSTALLATION
BENCH TOP
KICK BOARD
5
6 11
1
5
10
1
2
2
Front view Back view
6
6
3
4
9
2
4
1
5
2
3
2
2
1
1
7
11
1
2
2
2
Front view Back view
8
9
8
5
4
2
4
13
7
2
PARTS
PARTS INSTALL THE KICK BOARD
INSTALL THE BENCH TOP
Step 1. Using 2 x L brackets and 8 x screws, fix the kickboard
and slide into position.
Step 1. Use 4 x L brackets and attach using screws to attach to each
side of the cupboard.
Step 2. Attach splashback using 4 x lock and cam
1 Spashback
2Bench top
3Cubboard
4Kick board
5Lock & cam x4
6L bracket x6
1 Spashback
2Kick board
3Feet x4
4Screws x 24
5L bracket x 6

SINK
WALL CABINET - WALL MOUNTING
5
6 11
1
5
10
1
2
2
Front view Back view
6
6
3
4
9
2
4
1
5
PARTS
PARTS INSTALL THE TINT TUBE WALL CABINET & ACCESSORIES RACK
INSTALL THE SINK
Step 1. Position wall cabinet
Step 2. Drill holes in wall unit to suit and use secure to wall.
Please note: Screws to mount not supplied.
Step 3. Slide tint tube rack within the cabinet
Step 1. We suggest using a licenced plumber to install the sink and
plumbing. Place sink into position and secure with silicon.
Step 2. Install taps and drainage pipes as recommended by the plumber.
(not supplied)
1 Wall Cabinet
2Tint Rack x2
1 Basin
2Bench Top
3Cabinet
INSTALLATION
Floor
Wall
5
6 11
1
5
10
1
2
2
Front view Back view
6
6
3
4
9
2
4
1
5
1
3
2
ALL PLUMBING MUST BE COMPLETED
BY A LICENSED PLUMBER
IMPORTANT

The information contained in this document is subject to change without notice and
should not be construed as a commitment by Comfortel Furniture Pty Ltd.
Comfortel Furniture Pty Ltd. assumes no responsibility for any errors that may appear in
this document nor does it make expressed or implied warranty of any kind with regard
to this material, including, but not limited to, the implied warranties of merchantability
and fitness for a particular purpose.
Comfortel Furniture Pty Ltd. shall not be liable for incidental or consequential damages
in connection with or arising out of the use of this document and the program material.
PRODUCT CODE
PURCHASE DATE INVOICE NUMBER
NOTE YOUR PURCHASE DATE & INVOICE NUMBER FOR FUTURE REFERENCE
#8430 COLOUR STATION II
#8432 COLOUR STATION WITH SINK
#8435 TINT TUBE WALL CABINET
#8450R ACCESSORIES RACK
Revision Date: 15.11.2017
A periodic inspection of all components and fasteners
should be made to ensure that your Comfortel
product is structurally intact and functioning properly.
Damaged and broken parts should be replaced and
loose fasteners tightened.
All maintenance to be carried out by a suitably
qualified tradesperson.
·Clean regularly with everyday household
cleaners.
·Dry with clean soft cloth
(never use abrasive cleaners)
Do not use:
·acetone ·furniture polishes
·bleach ·detergent
·abrasive cleaners ·steel wool
MAINTENANCE
CLEANING
PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE.
For more information about our products and services, contact us at comfortel.com.au
comfortel.com.au
PERIOD AND DESCRIPTION PRODUCTS
12 MONTHS PARTS & LABOR All products
2 YEARS PARTS ONLY All products excluding small electrical appliances
3 YEARS PARTS ONLY All electric actuators
5 YEARS PARTS ONLY Taps cartridge, Ceramic basins
10 YEARS PARTS ONLY Gas-lifts and gas-lift swivel plates
TERMS AND CONDITIONS
For more information about our warranty, please contact us at comfortel.com.au.
WARRANTY PERIOD BY PRODUCT
WARRANTY PERIOD
©Comfortel Furniture 1997-2017. All rights are reserved.
No part of this document may be photocopied,
reproduced or translated to another language without
written consent of Comfortel Furniture Pty Ltd.