comfortel 8030 User manual

comfortel.com.au
#8030 SALON MIRROR JOINER FRAME
STANDARD PACKAGE
#8030-W SALON MIRROR JOINER - WHEELS
#8030-S SALON MIRROR JOINER - SHELF
salon
mirror joiner
owners manual
1

SPECIFICATIONS
IMPORTANT PLEASE READ THESE SAFETY INSTRUCTIONS
GENERAL SAFETY
1. Read carefully and keep these instructions in a
safe place.
2. Use this product only for its intended function and
do not use attachments not recommended by the
manufacturer.
3. Do not use outdoors.
WEIGHT
15kg
33Ilbs
PLEASE USE CORRECT FIXTURES FOR MOUNTING BASED ON MIRROR & FLOOR TYPE. NO
RESPONSIBILITY IS ACCEPTED FOR ANY DAMAGE OR INJURY CAUSED BY INCORRECT MOUNTING.
PLEASE REFER TO MIRROR USER
GUIDE WHEN INSTALLING TO
DETERMINE BEST PRACTICE
MOUNTING.
IMPORTANT
2
(9.8")
(5.5")
(86.6")
(1")
(32.7")
(22.8")
(27.5") (33")

GET STARTED: INSIDE THE BOX
1PC
4PC
4PCS
4PCS
16PCS
M6X15MM
M8X40MM
4PCS
#8030 SALON MIRROR JOINER FRAME
INSTALLATION HOOK OPTIONS
REFER TO SALON MIRROR OWNERS GUIDE TO DETERMINE WHICH HOOK SUITS INSTALLATION
#8030-W SALON MIRROR JOINER - WHEELS
#8030-S SALON MIRROR JOINER - SHELF
2PCS 4PCS4PCS
1PC
FOLDED HOOK HANGER HOOK
3

ASSEMBLY: MIRROR JOINER FRAME
1 2 4
4
1PC 4PCS 16PCS FINAL
IT MUST BE BOLTED TO THE GROUND WHEN USING IT AS A FRAME ONLY
M6X15MM
4
INSTALLATION HOOK OPTIONS
REFER TO SALON MIRROR
OWNERS GUIDE TO DETERMINE
WHICH HOOK SUITS INSTALLATION

ASSEMBLY: WHEEL OPTION
1789
1PC 2PCS 4PCS4PCS FINAL
8
8
9
9
7
M8X40MM
5

1 12
1PC 1PC
ASSEMBLY: WORKBENCH
ASSEMBLY: SHELF
OPTION: TOP OF SALON JOINER
OPTION: USING CROSS BARS
1
1
12
12

GET STARTED: POWER
GPO’S/POWER OUTLET MUST BE INSTALLED BY
A QUALIFIED ELECTRICIAN IN ACCORDANCE
WITH LOCAL STANDARDS.
GPO’S/POWER OUTLET MUST BE INSTALLED BY
A QUALIFIED ELECTRICIAN IN ACCORDANCE
WITH LOCAL STANDARDS.
ALL ELECTRICAL WORKS MUST BE CARRIED OUT
BY A LICENSED ELECTRICIAN.
ALL ELECTRICAL WORKS MUST BE CARRIED OUT
BY A LICENSED ELECTRICIAN.
IMPORTANT
IMPORTANT
IMPORTANT
IMPORTANT
FRAME ONLY / BOLTED TO THE FLOOR
CONNECT TO UNIT
(BOLTED TO FLOOR
ONLY)
FRAME WITH WHEELS / MOVEABLE
DO NOT INSTALL POWER
ON THE UNIT.
POWER IS NOT RECOMMENDED
WHEN INSTALLED ON WHEELS.
RECOMENDED OPTION IS
CABLE FROM CEILING (NOT
CONNECTED TO FRAME) OR
FLOOR MOUNTED POWER
OUTLET (NOT CONNECTED TO
FRAME)
FROM FLOOR
FROM FLOOR
FROM CEILING
FROM CEILING

PRODUCT CODE
#8030 SALON MIRROR JOINER FRAME
STANDARD PACKAGE
#8030-W SALON MIRROR JOINER WHEELS
#8030-S SALON MIRROR JOINER SHELF
A periodic inspection of all components and fasteners
should be made to ensure that your Comfortel
product is structurally intact and functioning properly.
Damaged and broken parts should be replaced and
loose fasteners tightened.
All maintenance to be carried out by a suitably
qualified tradesperson.
GENERAL CLEANING
·We recommend the use of soapy water or
approved cleaners.
·This product should not be cleaned with abrasive
materials.
·Damage caused by any improper treatment is not
covered by the product warranty
MAINTENANCE
CLEANING
8
The information contained in this document is subject to change without notice and
should not be construed as a commitment by Comfortel Furniture Pty Ltd.
Comfortel Furniture Pty Ltd. assumes no responsibility for any errors that may appear in
this document nor does it make expressed or implied warranty of any kind with regard
to this material, including, but not limited to, the implied warranties of merchantability
and fitness for a particular purpose.
Comfortel Furniture Pty Ltd. shall not be liable for incidental or consequential damages
in connection with or arising out of the use of this document and the program material.
PURCHASE DATE INVOICE NUMBER
NOTE YOUR PURCHASE DATE & INVOICE NUMBER FOR FUTURE REFERENCE
PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE
For more information about our products and services, contact us at comfortel.com.au
comfortel.com.au
©Comfortel Furniture. All rights are reserved. No part
of this document may be photocopied, reproduced or
translated to another language without written consent
of Comfortel Furniture Pty Ltd.
WARRANTY PERIOD
TERMS AND CONDITIONS. For more information about our warranty, please refer to our website.
Revision Date: V3.18.11.2020