comfortel 8312 User manual

help.comfortel.com.au
#8312 NATURAL WALNUT DOUBLE WORKBENCH
#8313 BLACK DIAMOND DOUBLE WORKBENCH
#8314 NATURAL ASH DOUBLE WORKBENCH
double
workbench
owners manual

GET STARTED
DOUBLE WORKBENCH
for salons
All measurements are in mm / Inches.
GENERAL SAFETY
1. Read carefully and keep these instructions in a
safe place.
2. Use this product only for its intended function and
do not use attachments not recommended by the
manufacturer.
3. Do not use outdoors.
IMPORTANT PLEASE READ THESE SAFETY INSTRUCTIONS
WEIGHT: 4kg / 8.8Ilbs
PLEASE USE CORRECT FIXTURES FOR MOUNTING BASED ON WALL TYPE. NO RESPONSIBILITY
IS ACCEPTED FOR ANY DAMAGE OR INJURY CAUSED BY INCORRECT MOUNTING.
Width 825mm / 32.5"
Height 140mm / 5.5"
Bench Depth 220mm / 8.7"
Weight: 4kg / 8.8 Ilbs
580mm /22.8"
825mm /32.5"
220mm /8.7"
18mm /0.7"
140mm /5.5"
105mm /4"

INSTALLATION: WALL MOUNTING
BEFORE INSTALLING YOU SHOULD CONSIDER THE FOLLOWING:
Allow for the necessary room around the unit for free movement.
When installing,position bench so it is 800mm - 860mm (31.5 -
33.8") from the floor. This is the recommended bench height. WALL FIXINGS NOT SUPPLIED.
PLEASE REFER TO WEIGHT WHEN
INSTALLING TO DETERMINE BEST
PRACTICE MOUNTING.
All measurements are in mm / Inches.
MOUNTING TO WALL
1. Position frame as pictured
2. Using fixings (Not supplied), secure frame to wall
IMPORTANT
PLEASE USE CORRECT FIXTURES FOR MOUNTING BASED ON WALL TYPE. NO RESPONISBILITY
IS ACCEPTED FOR ANY DAMAGE OR INJURY CAUSED BY INCORRECT MOUNTING.
800mm / 31.5"
730mm / 28.7"
580mm /22.8"
GENERAL CLEANING
·We recommend the use of soapy water or
approved cleaners.
·This product should not be cleaned with abrasive
materials.
·Damage caused by any improper treatment is not
covered by the product warranty.
CLEANING
A periodic inspection of all components and fasteners
should be made to ensure that your Comfortel product is
structurally intact and functioning properly.
Damaged and broken parts should be replaced and loose
fasteners tightened. All maintenance to be carried out by a
suitably qualified tradesperson.
MAINTENANCE

The information contained in this document is subject to change without notice and
should not be construed as a commitment by Comfortel Furniture Pty Ltd.
Comfortel Furniture Pty Ltd. assumes no responsibility for any errors that may appear in
this document nor does it make expressed or implied warranty of any kind with regard
to this material, including, but not limited to, the implied warranties of merchantability
and fitness for a particular purpose.
Comfortel Furniture Pty Ltd. shall not be liable for incidental or consequential damages
in connection with or arising out of the use of this document and the program material.
PRODUCT CODE
PURCHASE DATE INVOICE NUMBER
NOTE YOUR PURCHASE DATE & INVOICE NUMBER FOR FUTURE REFERENCE
PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE
For more information about our products and services, contact us at comfortel.com.au
help.comfortel.com.au
©Comfortel Furniture. All rights are reserved. No part
of this document may be photocopied, reproduced or
translated to another language without written consent
of Comfortel Furniture Pty Ltd.
WARRANTY PERIOD
TERMS AND CONDITIONS. For more information about our warranty, please refer to our website.
Revision Date: V2.11.08..2020
#8312 NATURAL WALNUT DOUBLE WORKBENCH
#8313 BLACK DIAMOND DOUBLE WORKBENCH
#8314 NATURAL ASH DOUBLE WORKBENCH
ASSEMBLY: SALON JOINER