comfortel QUATTRO II User manual

#6064 QUATTRO II
quattro II
treatment table
owners manual
04
06
comfortel.com.au

GET STARTED
IMPORTANT
IMPORTANT
IMPORTANT
IMPORTANT
IMPORTANT
Listed below are essential safety precautions.
GENERAL SAFETY
1. Read carefully and keep these instructions in a safe place.
2. Use this product only for its intended function and do not
use attachments not recommended by the manufacturer.
3. Do not use outdoors.
4. Do not try to move the table when in use.
ELECTRICAL APPLIANCES
1. All GPO’s must be installed by a qualified Electrician in
accordance with local electrical standards.
2. DO NOT allow children to operate the electric motors
in this product.
3. Turn the power o and remove the plug when not in use.
4. Turn the power o and remove the plug when cleaning.
5. Do not let the power cord get damaged in any way.
6. Keep the power cord away from heat sources.
7. Do not use an extension cord unless the cord complies
with local electrical safety standards.
8. Periodically inspect the power cord for signs of damage.
9. Do not operate any electrical item with a damaged
power cord.
IMPORTANT PLEASE READ THESE SAFETY INSTRUCTIONS
KEEP FINGERS AND HANDS AWAY FROM
TABLE JOINTS UNDER THE TABLE
DO NOT ALLOW CHILDREN AROUND THE
TREATMENT TABLE WHEN IN USE
DO NOT ALLOW CHILDREN TO OPERATE THE
ELECTRIC MOTORS THAT MOVE THE TABLE
DO NOT USE AROUND WATER OR IN A
WET ENVIRONMENT
WHEN REPLACING ANY PARTS OR
ASSEMBLING THE TABLE, YOU MUST
ENSURE THE TABLE IS RESTING ON IT'S
SIDE TO SAFEGUARD FROM CRUSH INJURY
290
115 115
SIDE VIEW
TOP VIEW FLAT
FRONT VIEW
290
240
520-860
40°
700
60
1605
110
1150
1200
15
880
515 700
210
30 280 100
540
30100
190
290
2120
115 115
700 515
210
1870
280 30
540
10030 100
190
520-860
240
2901150
60
1605
1200
15
110
SIDE VIEW
TOP VIEW
FRONT VIEW
All measurements are in MM.
Width: 650mm (880mm with arms)
Length: 1870mm (2120mm with face cradle)
Height Range: 52cm-86cm
· Electric height adjustment
· Manual back adjustment
· Foot control
QUATTRO II
Beauty bed with electric adjustment
TOP VIEW FLAT POSITION
OPTIONAL UPGRADE
BATTERY for back up
power supply

PARTS OPERATION
FUNCTIONS
PARTS
1. Removable head rest
2. Removable arm rests
3. Wheels (x4)
4. Foot lever to activate movement of 4 wheels
5. Lever to operate gas-lift back rest /Up/Down
6. Electric motor
7. Foot control remote
8. Removable face cradle and arm holder
Adjust the height range of the treatment
table with the electric foot control.
1. - Moves the bed down
2. + Moves the bed up
FOOT CONTROL
01
02
02
03
04
05
06
08
FLAT POSITION
07
BACK ADJUSTMENT
Located behind the back rest,
adjust the backrest up and down
using the lever.
HEIGHT ADJUSTMENT
Using the foot control, adjust the table
height by going up or down.
Minimum Height: 520mm
Maximum height: 860mm
WHEEL MECHANISM
Located on the bottom of the
foot-end of the treatment table, the
Sit-Stand lever adjusts the wheels into
a locked or movable position.
By pushing down the lever, adjust the
wheels from the stand-by (locked)
position, to the movable position.
When you have moved the table
into position, make sure the lever is
returned in lock position so that the
table is stable.
01
02
520- 860MM

The information contained in this document is subject to change without notice and
should not be construed as a commitment by Comfortel Furniture Pty Ltd.
Comfortel Furniture Pty Ltd. assumes no responsibility for any errors that may appear in
this document nor does it make expressed or implied warranty of any kind with regard
to this material, including, but not limited to, the implied warranties of merchantability
and fitness for a particular purpose.
Comfortel Furniture Pty Ltd. shall not be liable for incidental or consequential damages
in connection with or arising out of the use of this document and the program material.
PRODUCT CODE
PURCHASE DATE INVOICE NUMBER
NOTE YOUR PURCHASE DATE & INVOICE NUMBER FOR FUTURE REFERENCE
PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE
For more information about our products and services, contact us at comfortel.com.au
comfortel.com.au
#6064 QUATTRO II TREATMENT TABLE
1 X 10AMP GPO REQUIRED
POWER: 240V, 5060HZ, MAX 2.4A
MAX LOAD: 150KG
A periodic inspection of all
components and fasteners should be
made to ensure that your Comfortel
Product is structurally intact and
functioning properly.
Damaged and broken parts should
be replaced and loose fasteners
tightened.
All maintenance to be carried out by
a suitably qualified tradesperson.
UPHOLSTERY
· All upholstery needs some care; good housekeeping will help to prolong
the life of any upholstered products.
· Avoid extreme temperatures. Extreme cold can make your vinyl prone to
cracking, while extreme heat can cause permanent stretching.
· Avoid exposing to direct sunlight for prolonged periods of time.
ALWAYS FOLLOW THE CLEANING INSTRUCTIONS
· Clean regularly (weekly) to remove body oils which cause hardening
· To clean use a sponge which has been moistened in warm soapy water
· After cleaning with a sponge, dry with a soft, clean cloth
· Stubborn grime may require gentle scrubbing with a soft brush
Do not use:
·acetone ·furniture polishes ·bleach
·detergent ·abrasive cleaners ·steel wool
Damage caused by any improper treatment of this product is not covered
by the product warranty.
CLEANINGMAINTENANCE
IMPORTANT
WHEN REPLACING ANY PARTS OR
ASSEMBLING THE TABLE, YOU MUST
ENSURE THE TABLE IS RESTING ON IT'S
SIDE TO SAFEGUARD FROM CRUSH INJURY
Revision Date: 28.06.2018
©Comfortel Furniture 1997-2018. All rights are reserved.
No part of this document may be photocopied,
reproduced or translated to another language without
written consent of Comfortel Furniture Pty Ltd.
PERIOD AND DESCRIPTION PRODUCTS
12 MONTHS PARTS & LABOR All products
2 YEARS PARTS ONLY All products excluding small electrical appliances
3 YEARS PARTS ONLY All Linak electric actuators
5 YEARS PARTS ONLY Taps cartridge, Ceramic basins
TERMS AND CONDITIONS
For more information about our terms and conditions including warranty, please refer to our website.
WARRANTY PERIOD