The information contained in this document is subject to change without notice and should not be
construed as a commitment by Comfortel Furniture Pty Ltd.
Comfortel Furniture Pty Ltd. assumes no responsibility for any errors that may appear in this document
nor does it make expressed or implied warranty of any kind with regard to this material, including, but not
limited to, the implied warranties of merchantability and fitness for a particular purpose.
Comfortel Furniture Pty Ltd. shall not be liable for incidental or consequential damages in connection with
or arising out of the use of this document and the program material.
PRODUCT CODE
#7021 STUDIO 4 DRAWER TROLLEY
Revision Date: 07.07.2021
PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE
For more information about our products and services, contact us at comfortel.com.au
help.comfortel.com.au
©Comfortel Furnitur. All rights are reserved. No part of
this document may be photocopied, reproduced or
translated to another language without written consent
of Comfortel Furniture Pty Ltd.
A periodic inspection of all components and fasteners
should be made to ensure that your Comfortel product is
structurally intact and functioning properly.
Damaged and broken parts should be replaced and loose
fasteners tightened.
All maintenance to be carried out by a suitably qualified
tradesperson.
·Clean regularly with everyday household cleaners.
·Dry with clean soft cloth
(never use abrasive cleaners)
Do not use:
·acetone ·furniture polishes
·bleach ·detergent
·abrasive cleaners ·steel wool
MAINTENANCE CLEANING
380 15.0
200 7.8 200 7.8 200 7.8 97 3.8
340 13.4
900 35.4
#7021
STUDIO 4 DRAWER TROLLEY
310 12.2
290 11.4
PRODUCT
ALL DIMENSIONS MM [IN]REFER TO OWNERS MANUAL FOR FULL ASSEMBLY & INSTALLATION GUIDE
STUDIO 4 Drawer Trolley
Width: 380mm / 15"
Height: 900mm / 35.4"
Depth: 340mm / 13.4"
Material: Black Metal
GET STARTED COMBINATION LOCK
90°
0 0 0
Default Settings
The combination lock is set at 000
Turning the dial locks all the drawers
Set Up New or Reset Passcode
Open the top drawer to access the rear of the lock.
IMPORTANT:
DO NOT FORGET
NEW PASSCODE
IT CAN’T BE RESET
OR CHANGED WHEN
DRAWER IS LOCKED
Locate the small lever at the back of the lock approximately in the middle.
Move the lever to the right and hold in
position whilst setting a new number.
Release the lever once you have set your
new passcode. This will be your new code.
2 0 1
Once the drawer is locked, you will
not be able to reset the passcode
as you can not access the inside of
the lock to change the passcode.
Once you set your new passcode,
please store in a safe place for a
reminder.
