COMBINATION LOCK
The information contained in this document is subject to change without notice and should not be
construed as a commitment by Comfortel Furniture Pty Ltd.
Comfortel Furniture Pty Ltd. assumes no responsibility for any errors that may appear in this document
nor does it make expressed or implied warranty of any kind with regard to this material, including, but not
limited to, the implied warranties of merchantability and fitness for a particular purpose.
Comfortel Furniture Pty Ltd. shall not be liable for incidental or consequential damages in connection with
or arising out of the use of this document and the program material.
PRODUCT CODE
#7021 STUDIO 4 DRAWER TROLLEY
Revision Date: V2.11.08.2020
PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE
For more information about our products and services, contact us at comfortel.com.au
comfortel.com.au
©Comfortel Furnitur. All rights are reserved. No part of
this document may be photocopied, reproduced or
translated to another language without written consent
of Comfortel Furniture Pty Ltd.
A periodic inspection of all components and fasteners
should be made to ensure that your Comfortel product is
structurally intact and functioning properly.
Damaged and broken parts should be replaced and loose
fasteners tightened.
All maintenance to be carried out by a suitably qualified
tradesperson.
·Clean regularly with everyday household cleaners.
·Dry with clean soft cloth
(never use abrasive cleaners)
Do not use:
·acetone ·furniture polishes
·bleach ·detergent
·abrasive cleaners ·steel wool
MAINTENANCE CLEANING
1. Product Description:
This combination lock is consisted of 3 dials, which can be
opened or closed by rotating 90°.The initial password
is“000”and it can set up 999 dierent key codes.
2. Set up password:
① When the password is correct (factory password:000) and lock
is open (turn to CW 90°), move setting switch from point A to B.
② Roll dials to set up a new password you want.
③ Move setting switch back to point A, password was changed.
1. Rotate CW 90°to
open lock
2. Move setting switch
from point A to B
3. Roll dials to set
up password
4. Move setting switch
back to point A
Warm reminder: Remember your password after you change it.
If you forget it, you will not be able to open the lock
or change the password again.
90°
380mm / 15”
198mm / 7.8” 97mm/ 3.8”
340 mm / 13.4”
900mm / 35.4”
REVISION
PRODUCT
PART No.
SCALE:1:5
A3
1
#7021
STUDIO 4 DRAWER TROLLEY
STUDIO 4
Drawer Trolley
Width: 380mm / 15"
Height: 900mm / 35.4"
Depth: 340mm / 13.4"
Material: Black Metal
GET STARTED
