comfortel 6195 User manual

comfortel.com.au
wax pot digital
1 litre
#6195 WAX POT DIGITAL
owners manual

PARTS
1. 2x drip collars (one can be locked into position as a
protective collar and the other can be used on the base
of the wax warmer or kept separately as a spare collar)
2. On/O Supply Switch
3. Light to confirm power supply on/o
4. Digital display showing temperature setting
5. Push button temperature control
6. Sturdy handle for safe movement
7. Locking lid
8. Removable inner container with handle and scrape bar
3
GET STARTED
WAX POT DIGITAL
Digital temperature control
1L Teflon coated internal pot
Included in this box
1 x 1 litre digital wax warmer
2 x drip collars (1 spare)
1 x locking lid
1 x Teflon coated inner container
1
7
6
3
2
1
8
5
5
4

GENERAL SAFETY
1. Read carefully and keep these instructions in a
safe place.
2. Use this product only for its intended function and
do not use attachments not recommended by the
manufacturer.
3. Do not use outdoors.
PRECAUTIONS
1. Do not use near water
2. Do not immerse the unit in water or use it in an area
where it could be splashed.
3. Always unplug the until before cleaning
4. Never leave the unit on when the container is
empty
5. Never leave the wax warmer while the wax is HOT.
ELECTRICAL APPLIANCES
1. DO NOT allow children to operate in this product.
2. Turn the power o and remove the plug when not in
use or when cleaning.
3. Do not let the power cord get damaged in any way.
4. Keep the power cord away from heat sources.
5. Do not use an extension cord unless the cord
complies with local electrical safety standards.
6. Periodically inspect the power cord for signs of
damage.
7. Do not operate any electrical item with a damaged
power cord.
OPERATION
1. Plug the wax warmer into the power point
2. Place the quantity of wax in the removable inner container
3. Press on/o switch and confirm power supply (indicated by light marked power)
4. Using push button arrows select desire temperature
5. Note: To protect your wax warmers please ensure the temperature control is not set on the highest settings for
more than 20 minutes. The high setting can be used for quick heating of wax but then the temperature setting
must be adjusted downwards before use.
6. When the desired temperature has been reached, the digital display of the temperature will stop flashing.
7. The temperature will need to be set at a level suitable for the wax to be used and allow 30minutes for wax to
reach desired temperature.
8. When finished using the wax warmer turn power OFF and unplug from the power point.
9. Wax is to be heated in the removable inner container. To heat dierent waxes, additional inner containers can be
purchased. Please contact your supplier.
10. It is not recommended that original plastic containers for wax be inserted into the wax warmer as they are not
suitable for direct heat.
11. Avoid re-dipping applicators. Single-use wooden spatula are recommended.
12. All types of wax both strip and hot wax should be kept undisturbed at a minimum temperature level of 70°-80°C
for a minimum of 15 minutes between clients.
IMPORTANT PLEASE READ THESE SAFETY INSTRUCTIONS
OPERATION
CAUTION: DO NOT USE IF FLEXIBLE CORD IS DAMAGED
ANY REPAIRS TO THIS UNIT MUST BE CONDUCTED BY A QUALIFIED ELECTRICIAN.
TO REPAIR FLEXIBLE CORD, USE TWO CORE SHEATHED CABLE ONLY.

The information contained in this document is subject to change without notice and
should not be construed as a commitment by Comfortel Furniture Pty Ltd.
Comfortel Furniture Pty Ltd. assumes no responsibility for any errors that may appear in
this document nor does it make expressed or implied warranty of any kind with regard
to this material, including, but not limited to, the implied warranties of merchantability
and fitness for a particular purpose.
Comfortel Furniture Pty Ltd. shall not be liable for incidental or consequential damages
in connection with or arising out of the use of this document and the program material.
PRODUCT CODE
PURCHASE DATE INVOICE NUMBER
NOTE YOUR PURCHASE DATE & INVOICE NUMBER FOR FUTURE REFERENCE
A periodic inspection of all components and fasteners
should be made to ensure that your product is
structurally intact and functioning properly.
Damaged and broken parts should be replaced and
loose fasteners tightened.
All maintenance to be carried out by a suitably
qualified tradesperson.
The unit should be cleaned with a liquid cleaner
specifically formulated for the removal of wax.
Do not use solvents as they could damage the unit
and may produce toxic fumes when the heater is
operated.
Wax spilled onto the heater casing should be cleaned
immediately. Keep all lights and switches free from
any wax.
CAUTION: TO PREVENT DAMAGE TO THE
APPLIANCE DO NOT USE ALKALINE CLEANING
AGENTS WHEN CLEANING, USE A SOFT CLOTH
AND A MILD DETERGENT.
MAINTENANCE
CLEANING
PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE.
For more information about our products and services, contact us at comfortel.com.au
comfortel.com.au
#6195 WAX POT DIGITAL
POWER 240V.50Hz
OUTPUT: 260W
Revision Date: 28.06.2018
©Comfortel Furniture 1997-2018. All rights are reserved.
No part of this document may be photocopied,
reproduced or translated to another language without
written consent of Comfortel Furniture Pty Ltd.
PERIOD AND DESCRIPTION PRODUCTS
12 MONTHS PARTS & LABOR All products
2 YEARS PARTS ONLY All products excluding small electrical appliances
3 YEARS PARTS ONLY All Linak electric actuators
5 YEARS PARTS ONLY Taps cartridge, Ceramic basins
TERMS AND CONDITIONS
For more information about our terms and conditions including warranty, please refer to our website.
WARRANTY PERIOD