Commax JNS-70MN User manual

•Thank you for purchasing COMMAX products.
•Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.
•The company is not responsible for any safety accidents caused by abnormal operation of the product.
•Thank you for purchasing COMMAXproducts.
•Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.
•The company is not responsible for anysafety accidents caused byabnormaloperation of the product.
Nurse call function JNS-70MN
User Manual
www.safemag.ru
www.safemag.ru

2
Contents
1. Nurse call function
Main screen composition ................................................................................................. 4
Conversation with an inpatient ...................................................................................... 5
Receiving a call from an inpatient ................................................................................ 7
Staff Call funtion ................................................................................................................ 10
Emergency situation function ...................................................................................... 11
Simultaneous situation function ................................................................................. 13
Broadcasting function ..................................................................................................... 14
Smart control function .................................................................................................... 16
Searching the bed ............................................................................................................ 17
Designating the bed group .......................................................................................... 19
Deleting the bed ............................................................................................................... 23
Recent calls .......................................................................................................................... 24
Bed designation in charge ............................................................................................ 25
Setting the bed, group number .................................................................................. 38
2. Configuration
Setting the environment ....................................................................................... 41
Users notice
A class equipment
(Broadcasting communication
equipment for business)
Sellers or users should be advised of this
equipment as the equipment suitable for
electromagnetic waves for business use (A class)
and it aims at usage in region except house.
www.safemag.ru
www.safemag.ru

3
Chapter 1. Nurse call function
1. Main screen composition
2. Conversation with an impatient
3. Receiving a call from an impatient
4. Staff call function
5. Emergency situation function
6. Simultaneous situation function
7. Broadcasting function
8. Smart control function
8-1. Searching the bed
8-2. Designating the bed group
8-3. Deleting the bed
8-4. Recent calls
8-5. Bed designation in charge
9. Bed, group number setting
www.safemag.ru
www.safemag.ru

4
I. Main screen composition
Main screen
①, ② Page movement
③ Room number
④ Bed number
⑤ Whole broadcasting
⑥ Group broadcasting
⑦ Smart control
⑧ Remote control
③ ④
①②
⑤ ⑥⑦
⑧
www.safemag.ru
www.safemag.ru

5
II. Conversation with an inpatient
1. Using the speed dial (After setting the bed number)
1. Pick the receiver or press the speaker button in front.
2. After pressing the relevant room number, press the bed
number. Then, you can speak with by calling the relevant
patient. (In case of speaker phone mode, you can speak
with if you pick the handset.)
Screen using the speed dial
* , By pressing (①, ②), you can check the bed
numbers of previous and next rooms. (If 12 rooms, 8 beds are
inputted, max 24 rooms, 16 beds are set.)
①②
www.safemag.ru
www.safemag.ru

6
2. Using dial button
1. Pick the handset or press the speaker button in front.
2. After entering the relevant room number with the button
in front, press the asterisk(*). If you press the pound
button (#) after entering bed number, you can speak
with the relevant patient by calling him or her. (In case
of speaker phone mode, you can speak with if you pick
the handset.)
Screen using number button
www.safemag.ru
www.safemag.ru

7
III. Receiving a call from an inpatient
1. Request of an inpatient call
1. The number of bed and room requesting call are
displayed as green and yellow wall paper is switched.
Call request screen
2. If you pick the handset or press the speaker phone
button, the number of bed and room requesting call
are displayed.
Incoming progress screen
www.safemag.ru
www.safemag.ru

8
2. Seeing the stand-by call list (in case of offering bed
call function)
If there’s call request from another bed during the
conversation with a patient, stand-by call list will be
shown.
If you select the stand-by list while talking, previous
call will be ended and conversation with selected
bed will be started. Stand-by list will disappear when
the conversation has done.
Seeing stand-by call list
www.safemag.ru
www.safemag.ru

9
3. Outside call(IP-Phone) function(Option function)
During the nurses’ absence in the nurse station, call
request is delivered by the information of nurse and
schedule registered in the server(IP-PBX) to the
nurse’s cell phone. Once the nurse get the phone, a
main receiver is displayed the number of bed on a
screen. In a main receiver, outside call should be
ended in order to use call function.
Mark of outside call
* This function is needed additional devices such as IP-PBX,
Media Gateway for its use.
www.safemag.ru
www.safemag.ru

10
IV. STAFF CALL function
In case that the nurse judges the situation as emergency
when the nurse presses the presence switch from
patient’s call and visits the bed of the patient, in a bed if
you try call request on the screen of main receiver in a
nurse station the number of bed and emergency sound
will break out. (Same as call request screen)
Call request screen
www.safemag.ru
www.safemag.ru

11
V. Emergency situation function
1. Emergency situation notice
1. Can check emergency request occurred in a ward or
outside lavatory or shower room.
2. If you press the call button once more or pull the
emergency switch in the place occurred in the
emergency situation, emergency will be cancelled and
stand-by screen will appear.
General emergency notice screen in a ward
www.safemag.ru
www.safemag.ru

12
Outside emergency notice screen
* In case of ward of general, lavatory and shower room are marked as
same number. In case of outside, room number represents designated
number (9997) and lavatory or shower room are marked differently in bed
number
www.safemag.ru
www.safemag.ru

13
VI. Simultaneous situation function (Emergency +
Call)
1. Simultaneous situation notice
1. In case of emergency during conversation or
incoming call in the middle of emergency, you can
check them at the same time.
Simultaneous situation notice screen
① Call mark
② Emergency situation notice
①
②
www.safemag.ru
www.safemag.ru

14
VII. Broadcasting function
1. Whole broadcasting
Able to broadcast for whole rooms in connection with
receiver.
1. Pick the handset or deliver a message after pressing
the whole broadcasting in speaker mode.
Whole broadcasting implementation screen
www.safemag.ru
www.safemag.ru

15
2. Group broadcasting
Can broadcast with bed in a group. (Group setting in
remote control mode)
1. Pick the handset or press the group broadcasting at
the bottom of menu in speaker phone mode.
2. With using the dial button in front or selecting the
group to broadcast, press the group number and
deliver a message after pressing group number and
pound button (#).
Group broadcasting screen
www.safemag.ru
www.safemag.ru

16
VIII. Smart control
This function is provided in order to register and change
the bed phone in the main receiver. Because ID of first
released bed phone is identified, each bed phone can be
used through remote control.
www.safemag.ru
www.safemag.ru

17
1. Searching/saving the bed
It can be registered automatically by exploring the
shortcut as appointed numbers. As ID of bed telephone
is identical, this function is used after ID change.
1. After selecting max beds number in the blank to enter,
enter the all numbers of the installed bed inside the
ward. (the most installed beds number inside the
ward or the highest bed number inside the ward)
2. After selecting the edit box of start room number,
enter the lowest ward number in the ward.
①Max bed numbers
②Ward exploration room number to start
③Ward exploration room number to end
④ Start searching button
⑤ End button
①
②
③
④
⑤
www.safemag.ru
www.safemag.ru

18
3. Select the edit box for end room number. Then, enter
the highest ward number in a ward.
4. If the three information input is completed, press the
start button of exploration and then exploration will
be starting.
5. After completed the exploration, press the exit button.
Then, in a main screen, each bed’s hot key(shortcut)
registered automatically can be checked.
Exploration progress screen
ex) A certain ward in a general hospital has from second ward to fourth
ward, the ward which has the most beds is No. 1010 and No. 1011 and
they accommodate 8 beds.
Max bed number => Enter 8.
Ward exploration start => Enter 1001.
Ward exploration end => Enter 1020.
www.safemag.ru
www.safemag.ru

19
2. Designating the bed group
Able to set as identical group by selecting the bed to
want number group designation of registered bed.
①Bed group filter
②Bed selection button
③Bed ID (Room no.-Bed no.)
④Bed group ID
⑤Bed group ID selection
⑥Bed group change button
⑦Bed group deletion button
⑧Quit button
1. Through Bed group filter, search the registered beds
as all or each group.
①
② ③ ④
⑤
⑥
⑦
⑧
www.safemag.ru
www.safemag.ru

20
Group selection screen
2. After selecting the beds you want to change, press the
Bed group ID selection button and select the group
number to change. (Group F is default setting
number)
Bed selection and Bed group ID selection button screen
www.safemag.ru
www.safemag.ru