CommScope ONECELL RP5200 Manual

DRAFT
RP5200 Hardware Installation Guide
Release 5.5
Document Number: M0304AG
ONECELL®
Document Revision: 5.5.01
Date: April 2021

ii M0304AG 5.5.01 April 2021
DRAFT
Copyright 2021 CommScope, All rights reserved.
THIS DOCUMENT HAS BEEN DEVELOPED BY COMMSCOPE, AND IS INTENDED FOR THE USE OF ITS
CUSTOMERS AND CUSTOMER SUPPORT PERSONNEL.
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT
TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS
MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY
PRODUCTS.
THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET
FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED
HEREIN BY REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED
WARRANTY, CONTACT YOUR COMMSCOPE SALES REPRESENTATIVE FOR A COPY.

ONECELL® RP5200 Hardware Installation, Release 5.5 iii
DRAFT
Contents
Document revision history
About this document
Audience ...................................................................................................................... xi
Purpose......................................................................................................................... xi
What you need to know ............................................................................................... xi
Customer documentation ............................................................................................. xi
Conventions ...............................................................................................................xiii
Notes, cautions, and warnings ................................................................................... xiv
Chapter 1
CommScope ONECELL® overview
Overview....................................................................................................................1-2
CommScope ONECELL system................................................................................1-2
ONECELL hardware components .............................................................................1-3
Baseband Controller physical ports.....................................................................1-3
Chapter 2
RP5200 installation
RP5200 installation overview ....................................................................................2-2
Ceiling mount.............................................................................................................2-3
Mounting the Radio Point on the ceiling tile ......................................................2-5
Mounting the Radio Point above the ceiling tile...............................................2-12
Appendix A
Safety
Radiation Exposure Statement.................................................................................. A-2
FCC Part 15........................................................................................................ A-2
EN55032............................................................................................................. A-2
Human exposure limits for ONECELL deployments ............................................... A-2
Reference documents ......................................................................................... A-4
FCC ID...................................................................................................................... A-5
RP5200 ............................................................................................................... A-5
Appendix B
Installation troubleshooting
Radio Point RP5200 LED patterns ........................................................................... B-2

Contents
iv M0304AG 5.5.01 April 2021
DRAFT
Appendix C
Specifications
Environmental and physical specifications............................................................... C-1
SPF/SPF+ specifications........................................................................................... C-2
Appendix D
Cable installation and power separation guidelines
Overview...................................................................................................................D-2
Cable handling ..........................................................................................................D-2
Cable termination......................................................................................................D-3
Cable splicing.....................................................................................................D-4
Cable termination ...............................................................................................D-5
Cable grounding ...............................................................................................D-10
Lightning protection................................................................................................D-12
Important guidelines.........................................................................................D-12
Indoor box ........................................................................................................D-12
Outdoor protection ...........................................................................................D-13
Ceiling connector....................................................................................................D-15
Patch panel..............................................................................................................D-17
Power separation guidelines ...................................................................................D-17

Contents
ONECELL® RP5200 Hardware Installation, Release 5.5 v
DRAFT

ONECELL® RP5200 Hardware Installation, Release 5.5 vi
DRAFT
List of figures
Figure 1-1 ONECELL solution .........................................................................1-3
Figure 1-2 Baseband Controller ports ...............................................................1-5
Figure 2-1 CommScope ceiling mount kit (CommScope PN ????)..................2-3
Figure 2-2 Drop rail (CommScope PN ?????) ..................................................2-4
Figure D-1 Unreel cable....................................................................................D-2
Figure D-2 Cable with sock attached using tie wrap.........................................D-3
Figure D-3 RJ45, IP67 connector......................................................................D-3
Figure D-4 Assembling the connector on the RP end .......................................D-4
Figure D-5 CAT6-A lightning protector .........................................................D-13
Figure D-6 Remote equipment protection for outdoor devices.......................D-14
Figure D-7 Protector box mounted to pole......................................................D-15

ONECELL® RP5200 Hardware Installation, Release 5.5 vii
DRAFT
List of tables
Table 1 Customer documentation ....................................................................xii
Table 2 Conventions .......................................................................................xiii
Table 1-1 Baseband Controller physical port assignments.................................1-4
Table A-1 RF exposure for ONECELL at maximum power internal
antennas for RP5200 .........................................................................A-3
Table C-1 Environmental and Physical specifications....................................... C-1
Table D-1 CAT-6A protection equipment parts list.........................................D-13

List of tables
viii M0304AG 5.5.01 April 2021
DRAFT

ONECELL® RP5200 Hardware Installation, Release 5.5 ix
DRAFT
Document revision history
The following section lists documentation changes in ONECELL®RP5200
Installation Guide, v5.5 (M0304AG).
Revision 5.5.01 (April 20, 2021)
• Initial document release

Document revision history
x M0304AG 5.5.01 April 2021
DRAFT

ONECELL® RP5200 Hardware Installation, Release 5.5 xi
DRAFT
About this document
This document provides the procedures for installing RP5200 Radio Points.
Audience
This document is written for computer hardware installers and administrators,
network architects and business planners who are responsible for the planning and
design of the CommScope ONECELL deployment environment.
Purpose
This guide provides the information necessary for installing the RP5200 hardware in
the operator’s network.
What you need to know
The reader should have a basic understanding of:
• Data networks
• LTE technology
• General telecommunications practices
Customer documentation
The following table lists available documents in the ONECELL documentation suite.

About this document
xii M0304AG 5.5.01 April 2021
DRAFT
Table 1. Customer documentation
Title Contents
ONECELL®Feature Guide, v5.5
(M0304AE)
Contains a description of anchor features for the
current and previous releases, and a system overview,
including CommScope provided components and
required components from other vendors.
ONECELL® Network Planning
Guide, v5.5 (M0304AF)
Describes main components of the ONECELL
system, high-level view of hardware components,
how do you engineer an in-building system, how do
you determine Radio Points locations, and how to
design in-building systems. Contains best practices
for deployment, including when to use clustering, and
how to manage capacity.
ONECELL®RP5200 Installation
Guide, v5.5 (M0304AG)
Includes detailed installation instructions for
Baseband Controller and Radio Points hardware.
OM and KPI Reference for
ONECELL® Devices, v5.5
(M0304AK)
Describes the operational measurements and key
performance indicators for ONECELL devices.
ONECELL®Troubleshooting, v5.5
(M0304AJ)
Covers common troubleshooting scenarios in
deployed devices and troubleshooting methods.
ONECELL®Administration, v5.5
(M0304AH)
Describes how to operate, maintain and manage
ONECELL devices using the Baseband Controller’s
Web UI.
ONECELL®Device Alarm
Reference (M0304AL)
Includes ONECELL device alarm information.

About this document
ONECELL® RP5200 Hardware Installation, Release 5.5 xiii
DRAFT
Conventions
This guide uses the following text conventions, as applicable.
Table 2. Conventions
Convention Description
Syntax symbols
< > Enclose a required parameter or set of parameters. For
example:
>band-class <class>
<class> is a required parameter.
[ ] Enclose an optional parameter or set of parameters. For
example:
>activate image <version> [reboot]
[reboot] is an optional parameter.
| Separates items on a list of parameters, only one of
which can be used. For example:
>channel-included <yes|no>
A valid command is:
>channel-included yes
Font usage
Bold input font Indicates text that must be entered exactly as shown. For
example:
Enter ping 192.23.10.12.
Italic input font Indicates a variable parameter for which you must
provide an actual value. For example:
>authentication key <aukey>
<aukey> is a variable parameter.
A valid command is:
>authentication key 9782503000
Plain output font Indicates system output in a command line or system-
generated file. For example:
IP address 192.23.10.12 is alive.
Italic output font Indicates a variable in system output in a command line
or system-generated file. For example:
Installation of release <release> is
complete.

About this document
xiv M0304AG 5.5.01 April 2021
DRAFT
Notes, cautions, and warnings
NOTE
Notes provide additional information about the subject text.
CAUTION Cautions indicate that procedures, if performed incorrectly, can cause equipment
damage or data loss.
WARNING Warnings indicate that procedures, if performed incorrectly, can harm you.
Plain italic font Indicates file names, directory paths, book titles, chapter
titles, and user accounts.
Bold font Indicates text that appears on screen exactly as shown,
for example, names of screens, names of buttons, items
on menus, and items on pull down lists.
blue text Indicates a hypertext link.
Other conventions
> Indicates graphical user interface (GUI) menu path. For
example:
Select Edit > Add Network to open the Add Network
screen.
Table 2. Conventions
Convention Description

ONECELL® RP5200 Hardware Installation, Release 5.5 1-1
DRAFT
Chapter 1
CommScope ONECELL® overview
This chapter contains a high level overview of the ONECELL deployment and the
ONECELL components installed in the ONECELL system.
Overview 1-2
CommScope ONECELL system 1-2
ONECELL hardware components 1-3

Chapter 1 CommScope ONECELL® overview
1-2 M0304AG 5.5.01 April 2021
DRAFT
Overview
ONECELL is a revolutionary wireless system that can deliver the ultimate in wireless
performance.
• It eliminates cell borders and handovers
• It can cover a large area with consistent user experience without any significant
interference
• It can take advantage of multiple distributed radio points to deliver a stronger
signal on both the downlink and the uplink
• It can deliver greater capacity through distributed (multi-user and single-user)
MIMO and Coordinated Multipoint (CoMP)
• It has the flexibility to neutralize macro interference in co-channel small cell
deployments
• It can be used to deliver unprecedented levels of capacity to hot spot areas by
deploying radio points with overlapping coverage and enabling multi- user MIMO
In addition to these important benefits in user experience and data capacity,
ONECELL provides superior economics and investment protection, ease of
deployment and support for multi-operator deployments.
CommScope ONECELL system
ONECELL is an in-building, enterprise solution for LTE that provides an in-building
consistent signal. It operates as a wireless network with a single cell, called a
Baseband Controller, over distributed Radio Points. Network operators benefit from
the ONECELL because they reduce the load on their infrastructure.

Chapter 1 CommScope ONECELL® overview
ONECELL® RP5200 Hardware Installation, Release 5.5 1-3
DRAFT
Figure 1-1. ONECELL solution
ONECELL hardware components
The ONECELL hardware consists of the following components:
• Baseband Controller
— Baseband Controller Chassis
— Baseband Controller Module
— Power/Fan Unit (PFU)
• Radio Points
— RP2000 series
— RP5000 series
Baseband Controller physical ports
The following ports are on the front panel of the Baseband Controller Module.
Table 1-1 shows the port assignments. In addition, there is a connector used for the
GPS antenna cable.
NOTE For more detailed BC port information, see ONECELL® Network Planning Guide,
v5.5 (M0304AF).

Chapter 1 CommScope ONECELL® overview
1-4 M0304AG 5.5.01 April 2021
DRAFT
Table 1-1. Baseband Controller physical port assignments
Port
Assignment Network Port Speed Media Type Description
MGMT Local
Management
1 Gbps RJ45 External Interface to access the WebGUI on the
Baseband Controller.
0 Not used 1 Gbps RJ45 Not used
1-6 IQ Data 1 Gbps RJ45 Fronthaul IQ Data Traffic between the Baseband
Controller and Radio Points via an Ethernet switch
on copper (RJ45) port.
7 Boundary
Clock
1 Gbps Dual Media
RJ45 or SFP
Boundary Clock Input of IEEE 1588 PTP Timing
signal via dual media port.
8 IPsec 1 Gbps Dual Media
RJ45 or SFP
Backhaul Traffic (S1 and OAM Interfaces) via dual
media port. VLAN tags are configurable in Dual
IPsec mode to separate different traffic streams on
the same port.
9 X2 and
Redundancy
1 Gbps Dual Media
RJ45 or SFP
Fronthaul Traffic for X2 and Redundancy Cluster
data via dual media port.
10 RP
Management
and Timing
1 Gbps Dual Media
RJ45 or SFP
Fronthaul Traffic for IEEE 1588 PTP timing and
SOAP/XML control data via dual media port.
Timing and OAM data traffic between Baseband
Controller and Radio Points through an Ethernet
switch(s)
11 IQ Data 10 Gbps SFP+ Fronthaul IQ Data Traffic between the Baseband
Controller and Radio Points via Ethernet switch on
Fiber (SFP) port.
12 Not used 10 Gbps SFP+ Not used

Chapter 1 CommScope ONECELL® overview
ONECELL® RP5200 Hardware Installation, Release 5.5 1-5
DRAFT
Figure 1-2. Baseband Controller ports
Copper wire ports
Fiber optic ports

Chapter 1 CommScope ONECELL® overview
1-6 M0304AG 5.5.01 April 2021
DRAFT