Community Playthings A631 User manual

Product
Guide
User and
Maintenance
Information
© 2010 by Community Products, LLC
KQ17 D6259 Revision B
IMPORTANT
INFORMATION:
Please save this
product guide.
CUSTOMER SERVICE:
United States
PO Box 2
Ulster Park, NY 12487
Office hours: 9-5 EST
Phone [phone]
Fax [phone]
[phone]
www.CommunityPlaythings.com
[e-mail]
Recommended Use
Recommended for children ages 1-8. This Sand
and Water Table fills the need for a solid,
durable, mobile place for Sand and Water play.
Children will enjoy experimenting and playing
with different materials.
WARNING
cThis product is intended for use by children of
immature judgment, therefore supervision is
required at all times.
cWater is a drowning hazard. Do not leave pan of
water unattended.
CAUTION
cDo not use the Sand & Water Table on a sloped
or soft surface as it may make it unstable.
cWater on the floor is slippery. Clean up spills.
Assembly
Equipment comes in a single carton. The carton
contains:
1. Four legs, two with wheels
2. Table
3. Pan
4. Lid
5. Playshelf
6. Two top plugs (1 spare)
If your shipment is incomplete, please contact
Customer Service.
1. You may find it easiest to assemble the table
upside down.
2. The wheeled legs should be attached at one
end of the table with the wheels pointing
forward.
3. If you find the wheels are pointing sideways,
exchange the positions of the two wheeled legs.
4. Fit each leg onto a pair of bolts.
5. Note the two possible height settings.
6. Tighten the knobs to secure the legs.
Adjustments
To raise or lower the unit:
1. You may find it easiest to lay the table on its
side or upside-down.
2. Undo the knobs attaching each leg, remove the
leg and reposition on the other set of holes.
3. Tighten the knobs to secure the legs.
Operation
The lid provides a clear working surface when play
is finished. It can also be used to span between two
units. The playshelf can be used across the pan to
support buckets, funnels or sandpies. The pan is
fitted with a hose for easy drainage. To drain the last
water, raise one end of the pan. The plug prevents
drain hose from blocking. Dry wood components
after use.
Storage
The sand and water table and accessories should be
stored indoors with the pan empty of water.
Accessories
Canopy fits on the large frame only.
Storage Rack mounts between the legs.
Flow Pan adds an extra level and water flow pos-
sibilities.
Extras Kit includes a length of clear hose, a funnel,
a pulley and a mesh bag to further extend the play
possibilities.
Spare Pan gives the option of using different pans
for different media. A spare pan can also be pur-
chased to replace a worn out pan.
A631 Large Clear Table
A632 Large Teal Table
A634 Small Clear Table
A635 Small Teal Table
Large Table Small Table

© 2010 by Community Products, LLC
KQ17 D6259 Revision B
CUSTOMER SERVICE:
United States
PO Box 2
Ulster Park, NY 12487
Office hours: 9-5 EST
Phone [phone]
Fax [phone]
[phone]
www.CommunityPlaythings.com
[e-mail]
Page 2
User and
Maintenance
Information
(cont’d)
A631 Large Clear Table
A632 Large Teal Table
A634 Small Clear Table
A635 Small Teal Table
Maintenance
Every six months check that the leg knobs are tight.
Periodically inspect for cracks, breaks, loose parts,
missing parts, and/or malfunctions. Remove the
product from service when any condition develops that
might make operation unsafe.
Cleaning
The pan can be washed with soap or mild detergent
and water. Disinfectants can be used. Do not use
abrasive cleaners. Clean your table using a stiff brush
and a minimum of soap and water. Let dry thoroughly.
Construction
The frame, legs, and playshelf are made of hardwood
with a clear, non-toxic finish. Corners are made of
corrosion resistant zinc.
The pan is made from aqua ABS or clear PETG.
The lid is made from durable hardwood plywood
with a clear nontoxic finish.
The plug is made of soft plastic.
User Modifications
We are not responsible for modifications made by
customers to our products in the field without our
supervision, testing, or evaluation.
Ordering Parts
To order replacement parts, contact Customer Service
with a description of the part(s) needed and the ID
Code from the product.
Use only replacement parts supplied by
Community Playthings.