Community Playthings A910 User manual

Product
Guide
User and
Maintenance
Information
© 2011 by Community Products, LLC
VN50 D6787 Revision L
IMPORTANT
INFORMATION:
Please save this
product guide.
CUSTOMER SERVICE:
United States
PO Box 2
Ulster Park, NY 12487
Office hours: 9-5 EST
Phone [phone]
Fax [phone]
[phone]
www.CommunityPlaythings.com
[e-mail]
Recommended Use
Our rugged MultiTables are lightweight,
stackable, and modular. Quick, tool-free height
adjustment makes these attractive tables a
versatile addition to any classroom.
WARNING
cThis product is intended for use by children of
immature judgment, therefore supervision is
required at all times.
cDo not sit or stand on table.
cThis table will be unstable if the legs are not
installed according to directions.
cThe table top should be empty when making
adjustments to the table legs.
CAUTION
cFor indoor use only. The Multi-
Table is not waterproof.
Assembly
This carton contains one table
top and four adjustable legs.
If your shipment is incomplete,
please contact Customer Service.
For each leg:
1. Insert leg into socket.
2. Rotate leg clockwise until it is completely
tightened into socket. Use both hands to
tighten.
3. Stand the table on its legs. If it wobbles, check
that the legs are fully inserted into the sockets
and adjusted to equal height.
A910, A911, A912 22 x 30 MultiTable
A914, A915, A916 22 x 44 MultiTable
A918, A919, A920 Trapezoidal MultiTable
A938, A939, A940 36 Round MultiTable
A950, A951, A952 30 x 44 MultiTable
A958, A959, A960 30 x 30 MultiTable
Figure A
Pull
Down
Adjustment
Ring
Operation (See Figure A)
Tables, except the Round Table,
can be spiral stacked up to three
high. To stack tables more than three
high, table legs must be removed and
stored in the leg holder provided under the table top.
To adjust your table to a higher position, pull
wooden leg out from the plastic sleeve until it locks
at the desired height.
To lower your table height, lift the table and push
the adjustment ring on the leg down. Holding the
ring down, push wooden leg up until it locks at the
desired leg height.

© 2011 by Community Products, LLC
VN50 D6787 Revision L
CUSTOMER SERVICE:
United States
PO Box 2
Ulster Park, NY 12487
Office hours: 9-5 EST
Phone [phone]
Fax [phone]
[phone]
www.CommunityPlaythings.com
[e-mail]
A910, A911, A912
22 x 30 MultiTable
A914, A915, A916
22 x 44 MultiTable
A918, A919, A920
Trapezoidal MultiTable
A938, A939, A940
36 Round MultiTable
A950, A951, A952
30 x 44 MultiTable
A958, A959, A960
30 x 30 MultiTable
Maintenance
Periodically inspect for cracks, breaks, loose parts,
missing parts, and/or malfunctions. Remove the
product from service when any condition develops
that might make operation unsafe.
Cleaning
Wash the table surface with mild dishwashing liquid
or powdered detergent and warm water, using a soft
cloth. Rinse with warm water, and dry with a soft cloth
For more stubborn spots, use an all-purpose house-
hold cleaner such as Formula 409®, Windex®or
Lestoil®. Follow manufacturers directions.
Stains may be removed with undiluted Clorox®(pro-
tect your skin), by letting this bleach stand NO MORE
THAN 1½ MINUTES. Rinse thoroughly with warm
water. Repeat if necessary.
Mr. Clean® Magic Eraser can be used to remove
difficult marks on the table surface.
Construction
Tops are of durable ¾" Birch Plywood, surfaced with
long-wearing pressure-laminated plastic in maple
grain design. Plastic Sockets are constructed from
durable plastic.
Leg Sizes Available:
A932 - set of four 12-16" Table Legs
A934 - set of four 16-24" Table Legs
A936 - set of four 20-30" Table Legs
User Modifications
We are not responsible for modifications made by
customers to our products in the field, without our
supervision, testing or evaluation.
Ordering Parts
To order replacement parts, contact Customer
Service with a description of the part(s) needed and
the serial number of the product.
Use only replacement parts supplied by
Community Playthings.
Page 2
Maintenance
Information