Compaq Evo Workstation W4000 Setup guide

System Unit
1 Computer cover not spared
2 Front bezel assembly 257300-001
3 Chassis assembly not spared
4Power supply, PFC, dual voltage 244166-001
Mass Storage Devices (not illustrated)
18-GB U3 SCSI 10K hard drive 160063-001
18-GB U3 SCSI 15K hard drive 273053-001
36-GB U3 SCSI 10K hard drive 192197-001
36-GB U3 SCSI 15K hard drive 250186-001
72-GB U3 SCSI 10K hard drive 250187-001
20-GB UATA 100/7200 Quiet hard drive 180476-001
40-GB UATA 100/7200 Quiet hard drive 202904-001
80-GB UATA 100\7200 250185-001
120-GB UATA 100\7200 286669-001
Diskette drive, buttonless 237180-001
48X CD-ROM drive 232320-001
16/10/40X CD-RW drive 246691-001
16X DVD-ROM drive 232319-001
8/4/32+8 Combination CD-RW/DVD-ROM drive 255704-001
Zip drive, 250 232317-001
Miscellaneous Plastics, kit
Miscellaneous Plastics Kit, includes: 400549-001
*Switch holder (166777-001) (not this product)
* Card guide (166778-001)
*Rubber, foot (4 ea.) (166939-002) (not this product)
Miscellaneous Plastics Kit, includes: 257051-001
* Front bezel blank, carbon (166775-002)
*Power switch spring (166837-002) (not this product)
* Power switch/LED holder (245154-001)
1 LED holder (112589-001) (not this product)
* Power switch cable clip (172948-001)
*Not shown.
Miscellaneous Screw Kit (not illustrated)
Miscellaneous Screw Kit, includes: 257050-001
6-32 x 1/4 hi-top, thread-forming screw with serrations (5 ea.)
(192308-001)
6-32 x 3/16 (1 ea.) (296769-002) (not this product)
6-32 x 1/4 TT, hi-top Torx (2 ea.) (114399-067)
6-32 x 3/16 hi-top, thread-forming screw with serrations (4 ea.)
(192308-003)
6-19 x 5/16 (1 ea.) (114399-069) (not this product)
M3 x 5mm, hi-top, taptite screw with serrations (4 ea.) (247348-001)
Plastite, metric, flathead Phillips (4 ea.) (247481-001)
Keyboards (not illustrated)
Easy Access, PS/2 271122-xxx
Arabic -171 International -B31
Belgian -181 Latin American Spanish -161
Brazilian Portuguese -201 Norwegian -191
BHCSY* -B41 Polish -002
Czech -221 Portuguese -131
Danish -081 Russian -251
Dutch/Netherlands -002 S. Chinese -AA1
Finnish -351 Slovakian -231
French -051 Spanish -071
French-Canadian -121 Swedish -101
German -041 Swiss -111
Greek -151 Taiwanese -AB1
Hungarian -211 Thai -281
Italian -061 Turkish -141
Japanese -191 United Kingdom -031
Korean (Hanguel) -AD2 U.S. -001
*Bosnia-Herzegovina, Croatia, Slovenia, and Yugoslavia
Cables
1 DVI to VGA graphics adapter 202997-001
*CD-ROM Audio cable (387527-001) 149806-001
*USB Interface cable use with 252610-001 255439-001
*Diskette drive cable (143218-005) 257309-001
*Matrox G200 graphics cable assembly with bracket 171976-001
*IDE Ultra ATA dual device, hard drive/CD-ROM
cable, 10” with pull tab (108950-037) 257047-001
*IDE Ultra ATA dual device, hard drive/CD-ROM
cable, 14” (108950-038) 257048-001
*Power switch/LED cable with switch and LEDs
(174682-002) 257303-001
*SCSI LED cable (225537-001) 247485-001
*SCSI data cable (155825-001) 158277-001
*Front panel audio cable use with 252610-001 255440-001
*Miscellaneous cable kit (not shown) 254551-001
G200 Quad analog cable (168754-001)
G200 Quad DVI cable (168754-002)
*Miscellaneous Cable, kit includes: (not shown) 192264-001
Single UATA device hard drive/CD-ROM cable, 18” (108950-001)
Audio cable, 21” (387527-001)
Single UATA device hard drive/CD-ROM cable, 12.5” (105876-001)
Audio cable, 21” (288489-002)
Single UATA device, hard drive/CD-ROM cable, 9.75” (108950-021)
Modem Adapters with Plug and Cable (not shown)
U.S. 165224-001
United Kingdom 158593-031
Germany 304398-042
France 304398-051
Italy 304398-061
Switzerland 304398-112
*Not shown
b
© 2002 Compaq Information Technologies Group, L.P.
Compaq, the Compaq logo, and Evo are trademarks of
Compaq Information Technologies Group, L.P.
Intel and Pentium are trademarks of Intel Corporation.
All other product names mentioned herein may be
trademarks of their respective companies.
Compaq shall not be liable for technical or editorial errors
or omissions contained herein. The information in this
document is provided “as is” without warranty of any kind
and is subject to change without notice. The warranties for
Compaq products are set forth in the express limited
warranty statements accompanying such products. Nothing
herein should be construed as constituting an additional
warranty.
September 2002
Document Part Number
261488-004
Spare Part Number
262013-001
Compaq Evo Workstation
W4000
Illustrated Parts Map
Convertible Mini Tower
Miscellaneous Parts
1 Diskette drive adapter 155012-001
2 Chassis fan 257304-001
* Mouse, 3 button carbon 232616-001
* Mouse 2 button, carbon 237241-001
* Heatsink with fan, retaining clip, thermal interface,
and alcohol pad (for system board 252608-001) 254284-001
* Heatsink with fan, retaining clip, thermal interface,
and alcohol pad (for system board 277500-001) 254285-001
* Speaker 192518-001
* Battery 153099-001
* Return kit U.S. 166990-001
* Return kit International 166990-002
* Solenoid, hood lock 201485-001
*Not shown
Standard and Optional Boards
System board with alcohol pad and thermal grease
1System board (3 memory modules) 252608-001
*System board, 400 FSB, 2 DDR mem modules ) 277500-001
*System board, 533 FSB, 2 DDR mem modules 291042-001
Intel Pentium 4 Microprocessor with alcohol pad and thermal grease
*1.5 GHz (for system board 252608-001) 252918-001
*1.7 GHz (for system board 252608-001) 252919-001
* 2.0 GHz (for system board 252608-001) 252920-001
* 1.8 GHz, 400 FSB 255435-001
* 2.0 GHz, 400 FSB 273051-001
* 2.2 GHz, 400 FSB 273052-001
* 2.4 GHz, 400 FSB 283925-001
* 2.4 GHz, 533 FSB (only for 533 FSB system board) 288689-001
* 2.5 GHz, 533 FSB (only for 533 FSB system board) 288690-001
* 2.6 GHz, 533 FSB (only for 533 FSB system board) 305579-001
* 2.8 GHz, 533 FSB (only for 533 FSB system board) 305051-001
Graphics cards
* Matrox G450 AGP graphics 203626-001
* Matrox G550 AGP graphics 253275-001
* Matrox G200 MMS PCI Graphics 171975-001
* nVIDIA Quadro2 MXR AGP, 32 MB 244278-001
* nVIDIA Quadro2 EX AGP 233122-001
* nVIDIA Quadro2 PRO AGP, 64 MB 225829-001
* nVIDIA Quadro4 200 AGP, 64 MB 274622-001
* nVIDIA Quadro4 750 AGP, 128 MB 271241-001
* ATI FGL AGP 2X/4X ATX Graphics, 64MB 224885-001
* ATI FGL AGP 4X ATX Graphics 273441-001
Other Cards
*U3 SCSI Controller 158364-001
* Front panel USB/Audio board 252610-001
* NIC, 3Com 253951-001
3 Modem, 56K, PCI, V92 239411-001
* PCI Expansion Card 252609-001
* Hood lock board 252611-001
*Not shown
Memory Modules (see previous picture #2)
Size SDRAM Memory DDR Memory*
ECC Non-ECC ECC Non-ECC
128-MB 257305-001 170081-001 272931-001 285648-001
256-MB 257306-001 192014-001 272932-001 285649-001
512-MB 257307-001 254317-001 272933-001 285650-001
1.0-GB not available not available not available not available
*Used only on system boards with 2 memory module sockets.
Documentation and Packaging (not illustrated)
Service Reference Guide 259968-001
Quick Troubleshooting Guide 153837-001
Illustrated Parts Map 262013-001

System Boards with 2 memory module sockets use only DDR memory modules.
System Board Connectors and Jumpers (position of some untitled components may vary in location)
J20-22 PCI slots P23 Front Panel Audio header
J30 PCI Extension socket P24 Front Panel USB header
J40 AGP/AIMM connector P29 SCSI LED connector
P1 Power supply connector P49 Password jumper (Installed = Enabled,
Removed = Cleared)
P5 Power button, Power LED, and HD LED
connector P70 CPU fan connector
P6 Speaker connector P124 Hood lock solenoid connector
P7 CD-ROM audio connector P125 Hood intrusion sensor
P8 Chassis fan connector SW50 Clear CMOS button
P10 Diskette drive connector (Floppy) XBT2 Battery
P11 Aux audio connector XMM1-2 Memory sockets (2 sockets) (DDR only)
P20 Primary IDE connector XMM1-3 Memory sockets (3 sockets) (DIMM only)
P21 Secondary IDE connector XU1 Processor socket
System Hardware Interrupts
IRQ System Function IRQ System Function
0Timer Interrupt 8 Real-Time Clock
1Keyboard 9 Unused
2Interrupt Controller Cascade 10 Unused, available for PCI
3Serial Port (COM B) 11 Unused, available for PCI
4Serial Port (COM A) 12 Mouse
5Unused, available for PCI 13 Coprocessor
6Diskette Drive 14 Primary ATA (IDE) Controller
7Parallel Port (LPT 1) 15 Secondary ATA (IDE) Controller
Computer Diagnostic LEDs (on front of computer)
LED Color LED Activity State/Message
Power Green On (S0) Computer on
Power Green 1 blink every 1 second (S1) Normal Suspend Mode
Power Green 1 blink every 2 seconds (S3) Suspend to RAM
Power Green 1 blink every 4 seconds (S4) Suspend to Disk (if applicable)
Power Clear Off (S5) Computer off
Power Red 2 blinks 1 second apart, fol-
lowedby2-secondpause-
Repeat
CPU thermal shutdown
Power Red On CPU not installed
Power Red 1 blink every 1 second ROM error
Power Red 1 blink every 2 seconds Power supply crow bar
Hard Drive Green Blinking Hard drive activity
Keyboard Diagnostic LEDs
LED Color LED Activity State/Message
Num Lock Green Flashing (Beeps - 1S, 2L) Memory error
Caps Lock Green Flashing (Beeps - 1L, 2S) No video
Scroll Lock Green Flashing (Beeps - 2L, 1S) System board failure, prior to video
Num, Caps,
Scroll Lock Green Flash On-Off 2 times (Beeps - 1L, 3S) Invalid system ROM detected. ROM forces reflash.
Num, Caps,
Scroll Lock Green On (Rising Tone) ROM reflashed successfully
Num Lock Green On ROMPaq diskette not present, is bad, or drive
not ready.*
Caps Lock Green On Enter password.
Num, Caps,
Scroll Lock Green Blink On in sequence, one at a time - N, C, SL Keyboard locked in network mode
* Insert valid ROMPaq diskette in drive A. Turn power switch off, then on to reflash ROM. If ROM flash is successful, all
three keyboard LEDs will light up, and you will hear a rising tone series of beeps. Remove diskette and turn power off,
then on to restart the computer. For more information about flashing the ROM, refer to the Troubleshooting guide.
System Board Diagnostic Lights1
Main Power
Switch Status 3.3 V_Aux LED 5 V_Aux/PSON LED Power Button LED
OFF2ON ON4OFF
ON3ON OFF5ON
1. ON and OFF state of LEDs apply only to a good, working system board with AC power applied to the power supply.
2. Power LED on front of computer is OFF.
3. Power LED on front of computer is ON (Green).
4. 5V_Aux is ON.
5. PSON is active = power supply is turned ON.
Clearing CMOS*
The computer's configuration (CMOS) may occasionally be corrupted. If it is, it is necessary to clear the CMOS
memory using switch SW50.
To clear and reset the configuration, perform the following procedure:
1. Prepare the computer for disassembly.
ÄCAUTION: The power cord must be disconnected from the power source before pushing the Clear CMOS
Button (NOTE: All LEDs on the board should be OFF). Failure to do so may damage the system board
2. Remove the access panel.
3. Press the CMOS button located on the system board and keep it depressed for 5 seconds.
4. Replace the access panel.
5. Turn the computer on and run F10 Computer Setup (Setup-utility) to reconfigure the system.
*When the CMOS button is pushed or the jumper is removed, both the power-on password and the setup password
become invalid because both are stored in the configuration memory. You will need to reset the passwords.
Disabling or Clearing the Power-On and Setup Passwords*
1. Turn off the computer and any external devices, and disconnect the power cord from the power outlet.
2. Remove the access panel.
3. Locate the header and jumper labeled P49.
4. Remove the jumper from pins 1 and 2. Place the jumper over pin 2 only, in order to avoid losing it.
5. Replace the access panel.
6. Plug in the computer and turn on power. Allow the operating system to start.
NOTE: Placing the jumper on pin 2 clears the current passwords and disables the password features.
7. To re-enable the password features, repeat steps 1-3, then replace the jumper on pins 1 and 2.
8. Repeat steps 5-6, then establish new passwords.
Refer to the Computer Setup (F10 Setup) instructions to establish new passwords.
*When the CMOS button is pushed or the jumper is removed, both the power-on password and the setup password
become invalid because both are stored in the configuration memory. You will need to reset the passwords.
Computer Setup (F10) Utility Features (not all features may be available)
File
System Information
About
Set Time and date
Save to Diskette
Restore From Diskette
Set defaults and Exit
Ignore Changes and Exit
Save Changes and Exit
Storage
Device Configuration
Options
IDE DPS Self-Test
Controller Order
SCSI Narrow Termination
Boot Order
Security
Setup Password
Power-On Password
Password Options
Smart Cover
Smart Sensor
DriveLock
Master Boot Record Security
Save Master Boot Record
Restore Master Boot Record
Device Security
Network Service Boot
System IDs
Power Energy Saver Timeouts
Energy Saver Options
Advanced
Power-On Options
Onboard devices
PCI Devices
Bus Options
Devise Options
PCI VGA Configuration
Note:See Computer Setup (F10) Utility Guide on the Documentation Library CD.