Component Solution Services Verity REC02U Manual

REC02U Mobile DVR
INSTALL MANUAL
Distributed by Verity Rear Vision
A division of
Component Solution Services, LLC.
56600 Twin Branch Dr.,
Mishawaka, IN 46545
www.verityrvs.com
Please read this manual completely before operating the SYSTEM
2018 Verity Rear Vision Systems / All rights reserved / Subject to Change

Component Solution Services LLC., offers the Verity
Rear Vision Systems® to meet any requirements and
price point within the trucking, specialty vehicles, and
RV industry. Verity Rear Vision Systems®is also
home to the Supreme View®line of specialty format
systems. Our standard cabled systems offer
unparalleled features into the trucking and RV
industries. Designed for professional drivers, Verity
Rear Vision Systems develops and markets products
and applications to transmit video, audio, and data
either individually or in any and all combinations. The
company has also developed, manufactured, and
marketed different kinds of personal and vehicle video
cameras, DVRs, and accessories for the commercial
transportation, fire/rescue, and marine OEM markets.

Think safety
First
Read our manual before operating
or installing.
Most likely, your system came preinstalled, so the installation
section would be for reference.
Thank you for your purchase of our Verity Rear Vision
Systems®. When installed and used properly, your REC02U
is designed to deliver you years of trouble-free operation. This
manual contains important information required to properly
install and operate the unit. Verity Rear Vision Systems are
designed for quick installation by trained professionals in
proper installation environments. Our designs are based on
decades of working with vehicle manufacturers.
Verity Rear Vision Systems products are intended to be
installed as a supplement and our observation systems and/or
products are not intended for use as substitutes for rear-view
mirror devices, or for any other standard motor vehicle
equipment which may be required to be installed on vehicles
by law. Verity rear Vision Systems products promote
improving the vehicle operator’s field of view. Our products
are no substitute for proper defensive driving techniques,
observance of traffic laws and motor vehicle safety
regulations.
Installation Location
It is unlawful in most locals for any person to drive a motor
vehicle equipped with a television viewer/screen located at
any point forward of the back of the driver’s seat (or in any
location that is visible, directly or indirectly), to the driver while
operating the vehicle. Our systems are designed to be used
primarily as a rear observation device.
DO NOT OPEN ANY COMPONENT. There are no
serviceable parts inside any of the components of the Verity
Rear Vision products. Opening the product will break the
tamper indicators and void the warranty. Contact our tech
support if a problem should arise 574-807-6002. For faster
response, fill out a service ticket found on our website.
www.verityrvs.com

WARNING
Do not place heavy objects on cables or cover
them with carpet or mats.
Do not place cables where they can be
crushed in any manner.
Our systems are designed as a driving aid.
Watching videos, broadcasts, DVDs and/or any
images other than intended driving assistance
cameras is prohibited.
CAUTION
To avoid damage to the electronic circuit, stop
using this product while doing welding work to
the vehicle and/or trailers.
Never immerse any component in water, and
do not employ spray cleaners. When cleaning,
use a damp lint-free cloth only.
Connect this unit only to other compatible
devices.
Although our products have built-in surge and
cross polarity protection, make sure all cables
are connected properly; improper cable
connections may damage the camera and the
monitor.
Cables should not be allowed to touch hot or
rotating parts, such as the engine, ventilator,
etc.
Do not locate the monitor near heat generating
vents or devices.
Turn off power to the monitor when connecting
the camera.
Monitors are not designed to be waterproof. (Our
SM07F waterproof monitor is the exception).
Exposure to water, such as rain, may damage the
unit.

SYSTEM FEATURES
Description
Picture
Quantity
MDVR
1
Power cable
1
I/O cable
1
AV cable
1
Remote
control
1
DVR Key
1
IR Extension
cable
(Optional)
0

IMPORTANT
Important: Make sure remote is facing the front of the DVR during
remote operations. There should be no obstructions.

REMOTE
The batteries for the remote are not included or installed. 2 “AAA”
batteries are needed.
ESCAPE
UP / DOWN
RIGHT / LEFT
ENTER /
SELECT
PLEASE NOTE:
DVRs have been setup for 1-
camera systems to be used
with Verity SM07J & SM05J
systems.

USER LOGIN
Click the menu button on the remote; the login interface will appear.
Please input your UserName, Password, and select your language,
click “OK” to login the menu. (The default UserName is admin,
without Password). If you have not set these values you can use
the right arrow button to pass through these.
Once you have passed this step the menu button will bring up the
following drop-down menu
One View: 1 Camera option
Multi View: Show multi-camera options
Play Back: Open play back viewer
Backup: Backs up to thumb or external drive
Pause: Allows time to get some cold water
Menu: Opens operational options

Pin Out Definition
Pin out for Power, I/O, AV Input & Output.
Power interface
I/O Interface definition
PIN
Color
Definition
PIN
Color
Definition
1
Blue
Alarm output
2
Black
Ground
3
Purple
Alarm input 2
(Positive)
4
Purple
Alarm input 1
5
Purple
Alarm input 4
(Positive)
6
Purple
Alarm input 3
7
Red
5V Output
8
White
TXD(TTL Level)
9
Grey
IR Extension
10
Yellow
RXD(TTL Level)

HDD installation
Insert the key into the hole of the lock on the front panel and switch it to
OPEN status you will see the HDD 2.5” drive slot.
HDD Installation
Remove retaining screws for the hard disk.

Insert the hard drive into the bracket as shown below and secure the 4
fixed screws. (These screws were shipped with the DVR and are in the
accessory box.)
Insert the mounting bracket of the hard disk into the case and lock the
fixed screws on both sides.
If you want to install the SD card too, the SD card contacts are inserted
into the case facing down.

Power Connection
Please connect the power as indicated.
Positive pole (RED) connects with power input 10-36V DC,
ACC ignition (YELLOW) connects with 5-36V DC.
Negative to proper grounding post
DC
Chassis Ground
DC
12 v Hot
12 v Accessory Hot
The yellow ignition wire is used to detect the ignition signal. We
strongly suggest you connect it with the “RUN” terminal of the
ignition switch.
Connect Cameras to Camera harness.
Monitor connection

Verity Rear Vision Systems
A division of
COMPONENT SOLUTION SERVICES (CSS)
LIMITED ONE (1) YEAR WARRANTY
1. CSS products’ warranties are not transferable. The warranties apply to the
retail consumer for one (1) year and covers against defects in material and
workmanship.
2. Defective components will be replaced or repaired, based on a CSS
evaluation of the component. In-bound shipping charges, based on the CSS rate
allocated in the RMA (returned merchandise agreement), will be covered once
the component has been deemed defective at the CSS warranty facility. The
pre-assigned in-bound freight will be supplied upon return of product. All
repaired/replaced warranty parts shall be for the remaining duration of the
original warranty time period.
3. CSS takes pride in our products and will aid in the processing of your
components:
a) All warranty claimants must have consulted our technical support department
for trouble shooting and the acquiring of an RMA. Contact can be made via
email at [e-mail] or call 574-807-6002.
b) When the warranty claim is made, the consumer must establish the warranty
start dates by presenting documentation regarding the date of retail purchase
(e.g., bill of sale). c) Service performed by non-authorized service personnel
may void all warranty claims.
d) CSS will make no payments for system removal / system re-installing, mileage
allowance, or transportation expenses.
The limited warranty does not cover damage resulting from misuse, accident,
modification or alteration to hardware or software, tampering, unsuitable physical
or operating environment beyond product specifications, improper maintenance,
or failure caused by a product for which CSS is not responsible. There is no
warranty for any product with removed or altered identification labels. CSS
DOES NOT PROVIDE ANY OTHER WARRANTIES OF ANY KIND,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR
CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. SOME JURISDICTIONS DO NOT ALLOW THE LIMITATION OF
IMPLIED WARRANTIES, SO THIS LIMITATION MAY NOT APPLY TO YOU.
4. This warranty gives you specific legal rights, and you may also have other
rights that vary from state to state.

Technical Support
A service ticket can be filled out on line to supply the quickest
service. The service ticket can be easly found on our web site
www.verityrvs.com or use the code to the right. Please have the
serial number of the system which is found on
the back of the monitor when contacting the
service department. We take great pride in
delivering the most dependable product in the
industry. Each item was 100% QC tested and
then we randomly recheck another up to 10%
before it leaves our hands to you. We have a
.034% issue rate with this product.
Email Tech Support: [email protected]
Phone Tech Support: 574-807-6002
Note: if you are a fire/rescue customer in need of tech support
after hours or on weekends, leave a message and a technician will
return your call as soon as one becomes available.
a division of
Component Solution Services
56600 Twin Branch Drive
Mishawaka, IN 46545
574-807-6002
Toll Free 844-875-4799
We at Verity Rear Vision Systems would like to
personally thank you for purchasing our
product. Our company strives to supply the
best products at a fair price. We care that you
enjoy a safe driving experience.
2018 Verity Rear Vision Systems / All rights reserved / Subject to Change