Comtech EF Data FX series 1005 Service manual

FX Series
Administrator Guide
Version 6.2.2
IMPORTANT NOTE: The information contained in this document supersedes all previously published information
regarding this product. Product specifications are subject to change without prior notice.
MN-FXSERIESADM6 Revision 6

Comtech EF Data / Stampede
FX Series Administration Guide - Version 6.2.2 ii
Chapter: Using This Document
Section: Table of Contents MN-FXSERIESADM6 Rev 6

Comtech EF Data / Stampede
FX Series Administration Guide - Version 6.2.2 iii
Chapter: Using This Document
Section: Table of Contents MN-FXSERIESADM6 Rev 6
Table of Contents
Table of Contents .................................................................................................................................... iii
Table of Figures ...................................................................................................................................... vii
Using This Document..................................................................................................ix
Document Organization .......................................................................................................................... ix
Contacting Product Support..................................................................................................................... x
Key FX Series Appliance Information ................................................................................................ x
FX Series End User License Agreement ................................................................................................... xi
Patents and Trademarks ....................................................................................................................... xiii
Conventions and References................................................................................................................. xiv
Comtech EF Data Warranty Policy ......................................................................................................... xv
Release Notes....................................................................................................................................... xvii
Version 6.2.2 Functionality Enhancements................................................................................... xvii
Version 6.1.1 Functionality Enhancements................................................................................... xvii
Version 6.1 Functionality Enhancements......................................................................................xviii
Version 6.0.3 Functionality Enhancements.................................................................................... xix
Version 6.0.2 Functionality Enhancements.................................................................................... xix
Version 6.0.1 Functionality Enhancements..................................................................................... xx
1Overview - FX Series...................................................................................... 22
1.1 Stampede FX Series Product Line Update................................................................................22
1.2 Technologies that Optimize Satellite Bandwidth Acceleration................................................23
1.3 Single-Sided Solution ...............................................................................................................25
1.3.1 Load Balancing via WCCP ...................................................................................................25
1.3.2 Source IP Preservation .......................................................................................................25
1.3.3 Connection Management...................................................................................................26
1.3.4 ACM QoS.............................................................................................................................26
1.3.5 GZIP Compression ..............................................................................................................27
1.3.6 Image Reduction and Smoothing .......................................................................................27
1.3.7 Static Caching .....................................................................................................................28
1.3.8 TCP Optimization ................................................................................................................28
1.4 Two-Sided Solution ..................................................................................................................29
1.4.1 Cache Differencing .............................................................................................................29
1.4.2 Multiplexing of Large Data Objects ....................................................................................29
1.4.3 Partial Content Update Caching .........................................................................................30
1.4.4 Network Protocol Optimization .........................................................................................30
1.4.5 Dynamic Data Deduplication ..............................................................................................30
1.4.6 Header Compression/Packet Aggregation .........................................................................30
1.4.7 Multicator...........................................................................................................................31
1.5 FX Series Appliances ................................................................................................................32
1.5.1 Theory of Operation ...........................................................................................................32
1.5.2 Reporting ............................................................................................................................32
1.5.3 Deployment Options ..........................................................................................................33
1.6 FX Series Remote Appliance ....................................................................................................34
1.6.1 Theory of Operation ...........................................................................................................34
1.6.2 Reporting ............................................................................................................................35
1.6.3 Deployment Options ..........................................................................................................35
1.7 Mesh Networking with the FX Series.......................................................................................36

Comtech EF Data / Stampede
FX Series Administration Guide - Version 6.2.2 iv
Chapter: Using This Document
Section: Table of Contents MN-FXSERIESADM6 Rev 6
1.7.1 Theory of Operation ...........................................................................................................36
1.7.2 Mesh Capability with two FX Series appliances at each node............................................36
1.7.3 Mesh configuration with Redundancy ...............................................................................38
1.8 FX Series Appliances Data Sheet ..............................................................................................39
1.8.1 Single Sided with the Application Delivery Controller (ADC)..............................................39
1.8.2 Two Sided with the ADC and the Remote ..........................................................................39
1.8.3 Configuration Models.........................................................................................................40
1.8.4 FX Series Hardware Specification .......................................................................................41
1.8.5 FX-4010 Physical Description..............................................................................................42
1.8.6 FX4010 DC Physical Description .........................................................................................43
1.8.7 FX-1005 Physical Description..............................................................................................45
1.8.8 FX Series FX-1005 Hardware Mounting Options ................................................................47
1.8.9 FX-1010 Physical Description..............................................................................................48
2Initial Installation Information....................................................................... 50
2.1 Pre-Installation Information ....................................................................................................50
2.1.1 Unpacking...........................................................................................................................50
2.1.2 User Interfaces ...................................................................................................................50
2.1.3 Documentation...................................................................................................................50
2.2 How to Configure Appliance Management Address................................................................51
2.2.1 All Installation Patterns ......................................................................................................51
2.3 How to configure FX Series Installation Pattern (In-Line Mode) .............................................52
2.3.1 Cable the Appliance............................................................................................................52
2.3.2 Configure the Appliance .....................................................................................................52
2.4 How to configure FX Series Installation Pattern (Routed Mode).............................................54
2.4.1 Cable the Appliance............................................................................................................54
2.4.2 Configure the Appliance .....................................................................................................54
2.5 How to configure FX Series Installation Pattern (WCCP Mode)...............................................56
2.5.1 Cable the Appliance............................................................................................................56
2.5.2 Configure the Appliance .....................................................................................................56
2.5.3 Configure WCCP Settings....................................................................................................57
2.6 How to Configure Two FX Series Appliances in a Mesh Configuration ....................................59
2.6.1 Cable the Appliances ..........................................................................................................59
2.6.2 Configure the appliances....................................................................................................59
2.6.3 Mesh installation with Redundancy capability...................................................................59
3FX Series Configuration ................................................................................. 60
3.1 Standard Configuration Overview ...........................................................................................60
3.2 Management Settings..............................................................................................................62
3.2.1 How to Configure Network Interfaces................................................................................62
3.2.2 How to Configure Host/DNS Settings .................................................................................64
3.2.3 How to Configure SNMP Settings .......................................................................................65
3.2.4 How to Configure Web Admin Settings..............................................................................66
3.3 Traffic Interface Settings..........................................................................................................67
3.3.1 How to Configure In-Path Interfaces ..................................................................................67
3.3.2 How to Configure LAN Interfaces .......................................................................................69
3.3.3 How to Configure Port Definitions .....................................................................................70
3.3.4 How to Configure WCCP.....................................................................................................72
3.4 Quality of Service .....................................................................................................................79
3.4.1 Theory of Operations for QoS and Traffic Shaping.............................................................79
3.4.2 QoS Configuration Hierarchy Screen ..................................................................................81

Comtech EF Data / Stampede
FX Series Administration Guide - Version 6.2.2 v
Chapter: Using This Document
Section: Table of Contents MN-FXSERIESADM6 Rev 6
3.4.3 How to Configure QoS Links ...............................................................................................84
3.4.4 How to Configure QoS Groups ...........................................................................................88
3.4.5 How to Configure QoS Group Filters ..................................................................................89
3.4.6 How to Configure QOS Queues ..........................................................................................91
3.4.7 How to Configure QoS Queue Filters .................................................................................93
3.5 FX Series Multicator .................................................................................................................95
3.5.1 Multicator Settings .............................................................................................................96
3.5.2 How to set the Multicator General Configuration..............................................................98
3.5.3 How to set the Multicator Controller Configuration ..........................................................98
3.5.4 How to set the Multicator Transmitter Configuration .......................................................98
3.5.5 How to set the Multicator Receiver Configuration ............................................................99
3.6 Redundancy ...........................................................................................................................100
3.6.1 Redundancy Configuration Settings .................................................................................100
3.6.2 How to Configure Key-Exchange ......................................................................................101
3.6.3 How to Configure 1:1 Redundancy with Fail Over ...........................................................102
3.6.4 How to Synchronize Configurations in a WCCP Cluster....................................................103
4FX Series ADC General Settings.....................................................................104
4.1.1 How to Configure FX ADC in ‘Configuration-Only’ mode: ................................................105
4.1.2 Object Retrieval Logging...................................................................................................106
4.1.3 Traffic Interception...........................................................................................................106
4.1.4 Active Flows ......................................................................................................................107
4.1.5 System Time .....................................................................................................................107
4.1.6 Software Updates .............................................................................................................107
4.1.7 Other ................................................................................................................................108
5FX Series Remote General Settings ...............................................................109
5.1 System Time...........................................................................................................................109
5.2 Traffic Interception ................................................................................................................110
5.2.1 How to Configure FX Remote in ‘Configuration-Only’ mode: ..........................................110
5.3 Active Flows ...........................................................................................................................112
5.4 Other......................................................................................................................................112
6FX Series Status............................................................................................113
6.1 FX Series ADC Status ..............................................................................................................113
6.1.1 FX Series ADC WANOP Monitor........................................................................................114
6.1.2 FX Series ADC Current Statistics .......................................................................................117
6.2 QOS Monitors ........................................................................................................................123
6.2.1 QoS Link Monitor..............................................................................................................124
6.2.2 QOS Queue Monitor .........................................................................................................126
6.3 FX Series Remote Status ........................................................................................................129
6.3.1 FX Series Remote WANOP Monitor..................................................................................129
6.3.2 FX Series Remote Current Status Reports ........................................................................131
7FX Series Optimization Settings ....................................................................133
7.1 Application Policies Overview................................................................................................133
7.1.1 FX Series Optimization Summary .....................................................................................133
7.1.2 Single-Sided Optimizations:..............................................................................................134
7.1.3 Two-sided Optimizations..................................................................................................134
7.1.4 Authorization Realms .......................................................................................................134

Comtech EF Data / Stampede
FX Series Administration Guide - Version 6.2.2 vi
Chapter: Using This Document
Section: Table of Contents MN-FXSERIESADM6 Rev 6
7.1.5 Web Application Policies ..................................................................................................136
7.1.6 Authorization realm..........................................................................................................137
7.1.7 Enable Acceleration..........................................................................................................137
7.1.8 Allow Access .....................................................................................................................137
7.1.9 Caching .............................................................................................................................137
7.1.10 Content Validation .........................................................................................................138
7.1.11 Image Optimization ........................................................................................................138
7.1.12 Back-End Server Interface Options.................................................................................139
7.1.13 When Application Policies Take Effect: ..........................................................................139
7.1.14 Web Application Firewall ...............................................................................................139
7.2 How to Configure Basic Web Application Policies .................................................................140
7.2.1 How to Set the Policy Applicability...................................................................................140
7.2.2 How to Set Specific Users Access .....................................................................................141
7.2.3 How to Restrict Acceleration for Specific Sites, or Users .................................................141
7.2.4 How to Set Specific Optimization Techniques..................................................................142
7.3 Layer 5 Application Policies ...................................................................................................143
7.3.1 How to Configure Certified Applications ..........................................................................143
7.3.2 How to Configure Other Applications ..............................................................................143
7.3.3 How to Configure Layer 5 Optimizations..........................................................................144
7.3.4 Layer 5 Protocols ..............................................................................................................145
7.3.5 ToS handling method .......................................................................................................145
7.3.6 Layer 5 Acceleration - Discussion .....................................................................................146
8FX Series Operations Features ......................................................................147
8.1 Basic Operations Functions....................................................................................................148
8.1.1 How to Backup/Restore Configuration Files ....................................................................148
8.1.2 How to Initiate Disaster Recovery Procedure ..................................................................149
8.1.3 How to Change Passwords ...............................................................................................149
8.1.4 How to Manage Licenses / Fast Codes .............................................................................150
8.1.5 How to Shutdown/Restart................................................................................................151
8.2 How to do Network Trouble Shooting with Packet Capture..................................................152
8.3 How to Update Software .......................................................................................................154
8.3.1 Software Update Discussion.............................................................................................154
8.3.2 How to Download and Apply Image from ADC (FX Remote Only): ..................................155
9FX Series Support .........................................................................................156
9.1.1 Support Contact Information ...........................................................................................156
9.1.2 SNMP MIBS.......................................................................................................................156
9.1.3 Product Information and Support Links ...........................................................................157
10 Appendix .....................................................................................................158
10.1 Sample Acceleration Status Reports ......................................................................................158
10.2 FX Series Console Management Functions ............................................................................159
10.3 How to Update FX Series Appliance Software at 5.78.0 or earlier ........................................161
10.3.1 Base Platform Image (BPI) Upgrade Process ..................................................................161
10.3.2 Upgrade Kit and Prep .....................................................................................................161
10.3.3 The Upgrade Process......................................................................................................161

Comtech EF Data / Stampede
FX Series Administration Guide - Version 6.2.2 vii
Chapter: Using This Document
Section: Table of Figures MN-FXSERIESADM6 Rev 6
Table of Figures
Figure 1-1 FX Series Multicator Theory of Operation ....................................................................................................... 31
Figure 1-2 FX Series Basic Mesh Connectivity Diagram .................................................................................................... 36
Figure 1-3 FX Series Hub Spoke Mesh Connectivity Diagram ........................................................................................... 37
Figure 1-4 FX Series Mesh with Redundancy Connectivity Diagram ................................................................................ 38
Figure 1-5 FX Series Appliances Data Sheet...................................................................................................................... 39
Figure 1-6 FX Series Hardware Specifications................................................................................................................... 41
Figure 1-7 FX Series FX-4010 Back Panel .......................................................................................................................... 42
Figure 1-8 FX Series FX-1005 Front Panel ......................................................................................................................... 45
Figure 1-9 FX Series FX-1005 Rear Panel ..........................................................................................................................46
Figure 1-10 FX Series FX-1010 Front Panel ....................................................................................................................... 48
Figure 1-11 FX Series FX-1010 Rear Panel ........................................................................................................................ 49
Figure 2-1 FX Series Mesh Connection Diagram............................................................................................................... 59
Figure 3-1 FX Series Main Configuration Screen............................................................................................................... 60
Figure 3-2 FX Series Basic Network Interfaces Screen...................................................................................................... 62
Figure 3-3 FX Series Host/DNS Settings Screen ................................................................................................................ 64
Figure 3-4 FX Series SNMP Edit Screen.............................................................................................................................65
Figure 3-5 FX Series Web Management Interface Screen ................................................................................................66
Figure 3-6 FX Series In-Path Interfaces Screen ................................................................................................................. 67
Figure 3-7 FX Series LAN Interfaces Screen ......................................................................................................................69
Figure 3-8 FX Series Port Definitions Screen..................................................................................................................... 70
Figure 3-9 FX Series WCCP Definitions Screen.................................................................................................................. 73
Figure 3-10 FX Series QoS Hierarchy Screen..................................................................................................................... 81
Figure 3-11 FX Series QoS Links Screen ............................................................................................................................84
Figure 3-12 F Series QoS Link Edit Screen......................................................................................................................... 84
Figure 3-13 FX Series ACM QOS Status by Modem Report............................................................................................... 87
Figure 3-14 FX Series QoS Groups ....................................................................................................................................88
Figure 3-15 FX Series QoS Group Edit Screen ................................................................................................................... 88
Figure 3-16 FX Series QoS Group Filters ........................................................................................................................... 89
Figure 3-17 FX Series QoS Group Filters Edit Screen ........................................................................................................ 90
Figure 3-18 FX Series QoS Queues.................................................................................................................................... 91
Figure 3-19 FX Series QoS Queue Edit Screen ..................................................................................................................91
Figure 3-20 FX Series QoS Queue Filter Edit Screen ......................................................................................................... 93
Figure 3-21 FX Series Multicator General/Controller Edit Screen .................................................................................... 96
Figure 3-22 FX Series Multicator Transmitter/Receiver Edit Screen ................................................................................ 97
Figure 3-23 FX Series Redundancy Edit Screen............................................................................................................... 100
Figure 4-1 FX Series ADC General Edit Screen ................................................................................................................104
Figure 5-1 FX Series Remote General Edit Screen ..........................................................................................................109
Figure 6-1 FX Series Status Menu ................................................................................................................................... 113
Figure 6-2 FX Series ADC WANOP Monitor Screen.........................................................................................................114
Figure 6-3 FX Series ADC Current Status Menu .............................................................................................................. 117
Figure 6-4 FX Series QOS Monitor by Link ......................................................................................................................124
Figure 6-5 FX Series QoS Monitor by Queue ..................................................................................................................126
Figure 6-6 FX Series Remote Real-Time Monitor Screen................................................................................................129
Figure 6-7 FX Series Remote Current Status Menu ........................................................................................................131
Figure 7-1 FX Series ADC Features Menu .......................................................................................................................133
Figure 7-2 FX Series Application Policy Applicability Edit Screen ...................................................................................140
Figure 7-3 FX Series Authorization Realm Edit Screen.................................................................................................... 141
Figure 7-4 FX Series Specific Optimization Edit Screen ..................................................................................................142
Figure 7-5 FX Series Layer 5 Policy Configuration Edit Screen........................................................................................143

Comtech EF Data / Stampede
FX Series Administration Guide - Version 6.2.2 viii
Chapter: Using This Document
Section: Table of Figures MN-FXSERIESADM6 Rev 6
Figure 7-6 FX Series TCP/UDP Ports Table ......................................................................................................................146
Figure 8-1 FX Series Operations Menu ...........................................................................................................................147
Figure 8-2 FX Series Backup and Restore Screen............................................................................................................ 148
Figure 8-3 FX Series Change Passwords Screen..............................................................................................................149
Figure 8-4 FX Series Upgrade Fast Codes Screen............................................................................................................150
Figure 8-5 FX Series Shutdown/Restart Screen .............................................................................................................151
Figure 8-6 FX Series Packet Capture Screen ...................................................................................................................152
Figure 8-7 FX Series Software Version Display Screen.................................................................................................... 154

Comtech EF Data / Stampede
FX Series Administration Guide - Version 6.2.2 ix
Chapter: Using This Document
Section: Document Organization MN-FXSERIESADM6 Rev 6
Using This Document
This guide was prepared to assist you in the installation, configuration and management of the FX Series Appliances.
This document contains the same information that is available thru the on-line help contained with the FX Series web
based administrative screens. This document supports Release 6.2.0 of the FX Series Appliances.
Document Organization
Release Notes
This section delineates the major changes from the prior release.
Theory of Optimization
This section discusses the characteristic of data transmission that will cause slow response and
higher bandwidth requirements. It also delineates techniques that can reduce the slowness and
help reduce bandwidth requirements.
FX Series Technology
This section provides a brief description of the hardware and optimization techniques available
through the FX Series of appliances.
FX Series Installation Patterns
This section provides instruction on how to install the available configurations for all FX Series
appliances. It covers In-Line Mode, Routed Mode, WCCP Mode and Mesh Configurations
FX Series Network Settings
This section discusses how to set the basic networking parameters, such as Management Settings,
Traffic Interfaces, Quality of Service, Multicator Settings, and Redundancy.
FX Series ADC Specific Settings
This section discusses ADC specific network settings and current performance status, including
General Settings.
FX Series Remote Specific Settings
This section discusses Remote specific network settings and current performance status, including
General Settings and In-Path Settings.
FX Series Status
This section provides real time monitors and current statistics for the FX Series ADC, the FX Series
Remote and for Quality of Service.
FX Series Optimization
This section discusses optimization issues and definitions of optimization techniques available on
the FX Series appliances for web based or enterprise applications.
FX Series Operations
This section discusses tools to perform operational tasks, including Backups, License Management,
Shutdown/Restart, and Updating Software for all FX Series Appliances. This section also describes
how to obtain FX Series support, documentation, and downloads for the FX Series Appliances.
Symbols used in this manual: Important Note Informational Note

Comtech EF Data / Stampede
FX Series Administration Guide - Version 6.2.2 x
Chapter: Using This Document
Section: Contacting Product Support MN-FXSERIESADM6 Rev 6
Contacting Product Support
Go To:
http://www.comtechefdata.com/support
Comtech EF Data Product Support representatives for FX Series Products are available.
Comtech EF Data offers an annual subscription plan providing unlimited telephone support for the coverage
period, software upgrades and other important support provisions. Contact Product Support for more
information.
Key FX Series Appliance Information
This information should be recorded and saved for future reference for each FX Series Appliance. It should be
updated for any upgrades or changes. Providing this information to Support will assist the support team in
resolving issues and questions more quickly.
Comtech Serial Number
This can be found on the outside of the appliance.
The following information can be found on the Web GUI Web GUI (bottom left on all screens).
1. Manufacturer S/N
2. Software Version
3. Base Platform Image and Service Pack Version

Comtech EF Data / Stampede
FX Series Administration Guide - Version 6.2.2 xi
Chapter: Using This Document
Section: FX Series End User License Agreement MN-FXSERIESADM6 Rev 6
FX Series End User License Agreement
This is a legal agreement between you (either an individual or an entity) and Comtech EF Data Corporation.
HARDWARE LICENSE and WARRANTY
This product is covered by Comtech EF Data’s standard H/W warranty
SOFTWARE LICENSE
This SOFTWARE is protected by the copyright laws of the United States and international copyright treaties as
well as other intellectual property laws and treaties. This SOFTWARE product is licensed not sold.
The FX Series Appliance SOFTWARE you have licensed is defined as the SOFTWARE which operates on an
appliance. The FX Series Client SOFTWARE you have licensed is defined as the SOFTWARE which operates on
an intelligent, single computer, for use in accessing and accelerating Web, Browser or TCP-based
applications.
GRANT OF LICENSE: You have the right to install the FX Series Appliance SOFTWARE on all appliances for
which you have licensed copies. For each copy of the FX Series Client SOFTWARE this license confers you
have the right to install the SOFTWARE on a designated computer for use in accessing and accelerating Web,
Browser or TCP-based applications. The SOFTWARE is in “use” on a computer when it is loaded into
temporary memory (i.e. RAM) or installed into permanent memory (e.g., hard disk, CD-ROM, or other storage
device) of that computer. You may not install the SOFTWARE on more appliances or on more computers
than you have licensed copies.
Additionally, you have the right to make one (1) archival copy of the SOFTWARE for each appliance and for
each computer which has the SOFTWARE installed in accordance with the terms of this Agreement and
subject to the Use Restrictions as set forth below. The copyright notice, as contained in the original CD-ROM,
must be affixed to any archival copy.
COPYRIGHT: The SOFTWARE is owned by Comtech EF Data Corporation or its suppliers and is protected by
United States copyright laws and international treaty provisions. Therefore, you must treat the SOFTWARE
like any other copyrighted material (e.g., a book or musical recording). You may not copy any of the written
materials accompanying the SOFTWARE.
OTHER RESTRICTIONS: You may not rent, lease or sublicense the SOFTWARE, but you may transfer the
SOFTWARE and accompanying written materials on a permanent basis provided you retain no copies and the
recipient agrees to the terms of this Agreement. You may not modify, create a derivative work, reverse
engineer, decompile, or disassemble the SOFTWARE. If the SOFTWARE is an update or has been updated,
any transfer must include the most recent update and all prior versions. This license and your right to use
the SOFTWARE automatically terminate if you fail to comply with any provision of this license agreement.
SUPPORT AND UPGRADES: This Agreement does not entitle Licensee to any support, upgrades, patches,
enhancements or fixes for the Product (collectively, "Support"). Licensee must make separate arrangements
for Support and pay any fees associated with such Support. Any software upgrades, patches, enhancements
or fixes provided as part of Support for the Software that may be made available by Comtech EF Data’s
Maintenance agreement shall become part of the Software and subject to this Agreement.

Comtech EF Data / Stampede
FX Series Administration Guide - Version 6.2.2 xii
Chapter: Using This Document
Section: FX Series End User License Agreement MN-FXSERIESADM6 Rev 6
LIMITED WARRANTY
LIMITED WARRANTY: Comtech EF Data warrants that (a) the SOFTWARE will perform substantially in
accordance with the accompanying written materials for a period of ninety (90) days from the date of receipt
provided that it is used on the computer hardware and with the operating system for which it was designed.
Any implied warranties on the SOFTWARE are limited to ninety (90) days. These warranties commence on
the date you first obtain the product and extends only to you, the original customer. Some states/countries
do not allow limitations on duration of implied warranty, so the above limitations may not apply to you.
CUSTOMER REMEDIES: Comtech EF Data’s entire liability and your exclusive remedy shall be, at Comtech EF
Data’s option, either (a) return of the price paid, or (b) repair or replacement of the SOFTWARE that does not
meet Comtech EF Data’s Limited Warranty and which is returned to Comtech EF Data with a copy of your
receipt. IN NO CASE WILL COMTECH EF DATA’S LIABILITY EXCEED THE AMOUNT OF THE LICENSE FEE. This
Limited Warranty is void if failure to the SOFTWARE has resulted from accident, abuse, or misapplication.
Any replacement SOFTWARE will be warranted for the remainder of the original warranty period or thirty
(90) days, whichever is longer. Outside the United States, these remedies are not available without proof of
purchase from an authorized non-U.S. source.
NO OTHER WARRANTIES: The warranty and remedies set forth above are exclusive and in lieu of all other,
oral or written, expressed or implied. Comtech EF Data disclaims all other warranties, expressed or implied,
including, but not limited to, implied warranties or merchantability and fitness for a particular purpose, with
regard to the SOFTWARE, and the accompanying written materials. Comtech EF Data does not warrant that
the SOFTWARE’s functions will meet your requirements or that its operation will be uninterrupted or error
free. This limited warranty gives you specific legal rights. You may have others which vary from
state/country.
NO LIABILITY FOR CONSEQUENTIAL DAMAGES: In no event shall Comtech EF Data be liable for any damages
whatsoever (including, without limitation, damages for loss of business profits, business interruption, loss of
business information, or any other pecuniary loss) arising out of the use of or inability to use this Comtech EF
Data product, even if Comtech EF Data Inc. has been advised of the possibility of such damages. Because
some states/countries do not allow the exclusion or limitation of liability for consequential or incidental
damages, the above limitation may not apply to you.
EXPORT: You acknowledge that the laws and regulations of the United States restrict the export and re-
export of the SOFTWARE. You agree that you will not export or re-export the SOFTWARE in any form without
the appropriate United States and foreign government approval.
U.S. GOVERNMENT RESTRICTED RIGHTS
The SOFTWARE and documentation are provided with RESTRICTED RIGHTS. Use, duplication, or disclosure by
the Government is subject to restrictions as set forth in subparagraph (c)( 1) (ii) of the Rights in Technical
Data and Computer SOFTWARE clause at DFARS 252.227-7013 or subparagraphs (c) (1) and (2) of the
Commercial Computer SOFTWARE-Restricted Rights at 48 CFR 52.227-19, as applicable. Manufacturer is
Comtech EF Data (Stampede), 80A Rhoads Center Drive, Dayton, Ohio 45458. This Agreement is the entire
agreement between you and Comtech EF Data relative to the SOFTWARE and supersedes all prior written
statements, proposals or agreements relative to its subject matter. If you acquired this product in the United
States, this Agreement is governed by the laws of the State of Ohio. Should you have any questions
concerning this Agreement, or if you desire to contact Comtech EF Data, address your questions to:
Attention: Contracts Division.

Comtech EF Data / Stampede
FX Series Administration Guide - Version 6.2.2 xiii
Chapter: Using This Document
Section: Patents and Trademarks MN-FXSERIESADM6 Rev 6
Patents and Trademarks
See all of Comtech EF Data's Patents and Patents Pending at http://patents.comtechefdata.com.
Comtech EF Data acknowledges that all trademarks are the property of the trademark owners.
Webmin is a web-based system administration tool created by Jamie Cameron. All recent versions of
Webmin may be freely distributed and modified for commercial and non-commercial use.
Copyright© 2001-2004 SUSE LINUX SUSE and its logo are registered trademarks of SUSE AG. Linux is a
trademark of Linus Torvalds.
Portions Copyright© 1991-1997, Thomas G. Lane. All rights reserved.
All trademarks or registered trademarks are the property of their respective owners.
Stampede and Acceleration On-Demand are registered trademarks of Comtech EF Data/Stampede
© 2014 Comtech EF Data/Stampede. All rights reserved.
US Patent #5,682,514, #5,835,943. #6,012,085, #6,122,637, #6,339,787, #6, 615,275, #7,359,926,
#7,543,072
Under the copyright laws, this documentation may not be copied, photocopied, reproduced, translated,
or reduced to any electronic medium or machine-readable form, in whole or in part, without the prior
written consent of Comtech EF Data/Stampede.
Comtech EF Data
2114 West 7th Street
Tempe AZ 85281
WORLD WIDE WEB: http://www.comtechefdata.com

Comtech EF Data / Stampede
FX Series Administration Guide - Version 6.2.2 xiv
Chapter: Using This Document
Section: Conventions and References MN-FXSERIESADM6 Rev 6
Conventions and References
Metric Conversion
Metric conversion information is located on the inside back cover of this manual. This information is provided
to assist the operator in cross-referencing non-Metric to Metric conversions.
Recommended Standard Designations
Recommended Standard (RS) Designations have been superseded by the new designation of the Electronic
Industries Association (EIA). References to the old designations may be shown when depicting actual text
displayed on the Web Server (HTTP) or Command Line Interface pages for the FX Series appliance).
Trademarks
Product names mentioned in this manual may be trademarks or registered trademarks of their respective
companies and are hereby acknowledged.
Environmental
The FX Series Appliance must not be operated in an environment where the unit is exposed to extremes of
temperature outside the ambient range 0° to 50°C (32° to 122°F); precipitation, condensation, or humid
atmospheres above 95% relative humidity; altitudes (unpressurized) greater than 2000 meters; excessive
dust or vibration; flammable gases; or corrosive or explosive atmospheres. Operation in vehicles or other
transportable installations which are equipped to provide a stable environment is permitted. If such vehicles
do not provide a stable environment, safety of the FX Series appliance may not be guaranteed.

Comtech EF Data / Stampede
FX Series Administration Guide - Version 6.2.2 xv
Chapter: Using This Document
Section: Comtech EF Data Warranty Policy MN-FXSERIESADM6 Rev 6
Comtech EF Data Warranty Policy
Comtech EF Data products are warranted against defects in material and workmanship for a specific period
from the date of shipment, and this period varies by product. During the warranty period, Comtech EF Data
will, at its option, repair or replace products that prove to be defective. Repairs are warranted for the
remainder of the original warranty or a 90 day extended warranty, whichever is longer. Contact Comtech EF
Data for the warranty period specific to the product purchased.
For equipment under warranty, the owner is responsible for freight to Comtech EF Data and all related
customs, taxes, tariffs, insurance, etc. Comtech EF Data is responsible for the freight charges only for return
of the equipment from the factory to the owner. Comtech EF Data will return the equipment by the same
method (i.e., Air, Express, Surface) as the equipment was sent to Comtech EF Data.
All equipment returned for warranty repair must have a valid RMA number issued prior to return and be
marked clearly on the return packaging. Comtech EF Data strongly recommends all equipment be returned in
its original packaging.
Comtech EF Data Corporation’s obligations under this warranty are limited to repair or replacement of failed
parts, and the return shipment to the buyer of the repaired or replaced parts.
Limitations of Warranty
The warranty does not apply to any part of a product that has been installed, altered, repaired, or misused in
any way that, in the opinion of Comtech EF Data Corporation, would affect the reliability or detracts from the
performance of any part of the product, or is damaged as the result of use in a way or with equipment that
had not been previously approved by Comtech EF Data Corporation.
The warranty does not apply to any product or parts thereof where the serial number or the serial number of
any of its parts has been altered, defaced, or removed.
The warranty does not cover damage or loss incurred in transportation of the product.
The warranty does not cover replacement or repair necessitated by loss or damage from any cause beyond
the control of Comtech EF Data Corporation, such as lightning or other natural and weather related events or
wartime environments.
The warranty does not cover any labor involved in the removal and or reinstallation of warranted equipment
or parts on site, or any labor required to diagnose the necessity for repair or replacement.
The warranty excludes any responsibility by Comtech EF Data Corporation for incidental or consequential
damages arising from the use of the equipment or products, or for any inability to use them either separate
from or in combination with any other equipment or products. A fixed charge established for each product
will be imposed for all equipment returned for warranty repair where Comtech EF Data Corporation cannot
identify the cause of the reported failure.
Exclusive Remedies
Comtech EF Data Corporation’s warranty, as stated is in lieu of all other warranties, expressed, implied, or
statutory, including those of merchantability and fitness for a particular purpose. The buyer shall pass on to
any purchaser, lessee, or other user of Comtech EF Data Corporation’s products, the aforementioned
warranty, and shall indemnify and hold harmless Comtech EF Data Corporation from any claims or liability of
such purchaser, lessee, or user based upon allegations that the buyer, its agents, or employees have made
additional warranties or representations as to product preference or use.

Comtech EF Data / Stampede
FX Series Administration Guide - Version 6.2.2 xvi
Chapter: Using This Document
Section: Comtech EF Data Warranty Policy MN-FXSERIESADM6 Rev 6
The remedies provided herein are the buyer’s sole and exclusive remedies. Comtech EF Data shall not be
liable for any direct, indirect, special, incidental, or consequential damages, whether based on contract, tort,
or any other legal theory.
RMA Policy
To return a Comtech EF Data product (in-warranty and out-of-warranty) for repair or replacement, please
follow these guidelines.
Contact the Comtech EF Data Customer Support Department during normal business hours. Be prepared to
supply the Customer Support representative with the model number, serial number, and a description of the
problem. Request a Return Material Authorization (RMA) number from the Comtech EF Data Customer
Support representative.
Pack the product in its original shipping carton/packaging to ensure that the product is not damaged during
shipping.
Ship the product back to Comtech EF Data. (Shipping charges should be prepaid.)
Online RMA Support
An RMA number can be requested electronically by accessing Comtech EF Data’s online Support page
(www.comtechefdata.com/support.asp). From this page:
Click the Service hyperlink, and then read the Return Material Authorization section for detailed instructions
on Comtech EF Data’s return procedures.
Click [Send RMA Request] on the Support page or the RMA Request hyperlink provided in the Service |
Return Material Authorization section; fill out the Billing Information, Return Information, and Unit to be
Returned sections completely, then click [Send email]
Or –
Send an e-mail providing this same detailed information to the Customer Support Department at
[email protected]m.
Some Stampede products, programs, or services referred to in this publication may not be available in all
countries in which Stampede does business. Additionally, some Stampede products, programs, or services
may not be available for all operating systems or all product releases. Contact your Comtech EF
Data/Stampede representative to be certain the items are available to you.

Comtech EF Data / Stampede
FX Series Administration Guide - Version 6.2.2 xvii
Chapter: Using This Document
Section: Release Notes MN-FXSERIESADM6 Rev 6
Release Notes
Version 6.2.2 Functionality Enhancements
These new features have been developed in response to customer feedback and market analysis for the
purpose of increasing the interoperability of the FX Series with other CEFD products, to ease moving between
screens and to broaden the scope of environments where FX Series can be deployed. This release adds the
following new features:
The FX Series Administrative User
Interface has new pull-down
navigation structure instead of
menu icons.
This allows enhanced and reorganized tabs for quick and easy direct access to all sub menus. This
Header with pull downs allows direct access and is positioned at the top of all Web GUI screens.
The dynamic ACM screen is gone and is now part of the 'Link' screen
Multi-Level QoS supports multiple modems with ACM. There are now 3 levels of QoS instead of 1
ACM can now be configured to support non-Comtech modems
Point-to-multipoint packet compression is supported
SNMP can now be configured from the Administrative User Interface
Ability to monitor and configure active-flows has been added
Network status screen now clearly illustrates connectivity problems
QoS Queue and Link Monitor screens now show up to 30 days of history
Operations->Backup-Restore now allows you to restore just optimization setting without affecting
management settings
Improvements to source IP preservation in NAT environments
Ability to configure access control on HTTP URLs in L7 application policies
The default for the Administrative Web GUI is set to run over HTTP. (SSL default is now disabled).
Note: If version 6.1.1 was installed, then SSL will still be set to “Enabled” as the default to use when
logging in to the Administrative Web GUI.
Version 6.1.1 Functionality Enhancements
Package Release 6.1 new features were developed in response to customer feedback and market analysis for
the purpose of increasing the interoperability of the FX Series with other CEFD products and to broaden the
scope of environments where FX Series can be deployed.
This release adds the following new features:
Quality of Service
QoS only license is now rate limited at 700 Mbps instead of 500 Mbps
New protocol filter options for SCTP, PTPv1, PTPv3
Added support for VLAN priority in the QoS filters

Comtech EF Data / Stampede
FX Series Administration Guide - Version 6.2.2 xviii
Chapter: Using This Document
Section: Release Notes MN-FXSERIESADM6 Rev 6
FAST Codes
This release introduces new “trial license” Fast Codes for 30/60/90 day for Packet Compression
and WANOP.
Reporting
The Status->View Current Status->ACM QOS->By VSAT Modem has two changes.
New column header for 'Queue Name' indicates which queue a filter is directed
'Filter Hits' column header has been changed to 'Filter Matches'
Version 6.1 Functionality Enhancements
These new features have been developed in response to customer feedback and market analysis for the
purpose of increasing the interoperability of the FX Series with other CEFD products and to broaden the
scope of environments where FX Series can be deployed.
This release adds the following new features:
Enhanced QOS Monitor Functionality
CurrentStatus-> ACM QOS-By VSAT modem.
This now shows ingress packets and bytes which will be non-zero if packet compression is
happening.
CurrentStatus->ACM QOS-Throughput by QOS Queue.
This now shows packet compression savings percentage.
Configuration->QOS-Queues pick list.
This function has been dramatically reworked. You can now change CIR, MIR, Priority, and
enable/disable packet compression directly from the view.
Enhanced SNMP Functionality
MIB
Now has MIB which will allow full management of the FX.
Same MIB is used for both FX-Remote and ADC.
New wramp SNMP configuration wizard
Now prompts for destination 'trap' community and 'read/write' community. (Previous MIB
was not read/write and did not emit traps (traps are an SNMP term for alerts)
Enhanced Operations Functionality
Operations->Shutdown Restart.
Now has new 'Restart acceleration service and reset cache. This is now the only way to
completely reset the cache files
Status Monitor Enhancements
Real-Time Monitor
Real-time monitor now does a 'quick' reset of cache that does not require reboot.
CurrentStatus->NetworkStatus-Of WAN Interface.
This is a new status feature that is the only way to ascertain the MAC address of the WAN
interface.
Header Compression/Packet Aggregation
FX aggregates packets into an Ethernet frame and sends it to a peer, where the packets are
restored.
The default for DDS has been changed to 'Enabled' on the ADC. Previously it was 'Disabled' by
default.

Comtech EF Data / Stampede
FX Series Administration Guide - Version 6.2.2 xix
Chapter: Using This Document
Section: Release Notes MN-FXSERIESADM6 Rev 6
Version 6.0.3 Functionality Enhancements
These features have been developed in response to customer feedback and market analysis for the purpose
of increasing the interoperability of the FX Series with other CEFD products and to broaden the scope of
environments where FX Series can be deployed.
This release adds the following new features:
Multiprotocol Label Switching (MPLS) is now supported in ACM Filter Definitions.
If MPLS is selected, then the “MPLS Label” and “MPLS experimental bits” fields will be enabled as
filter criteria.
The default for Dynamic ACM Polling Method Parameters is changed.
The default setting is now the Modem type, with the pull-down choices including:
CDM-750, CDM-625, CDM-760, CDM-800, CDM-840, and CTOG-250.
The default is the CDM-750
L5 functionality has been enhanced with the following improvements
Pre-connect option has been removed from the L5 form
Enable acceleration has been added to the L5 form
It now includes the ability to define a “*” policy for L5. A “*” is a port range of 1-65535.
Other changes include:
VLAN Mode has been added to the general screen for (Trunk or Access)
Fail-to-Wire option has been added to the general screen (on or off)
ACM QOS Section of the Current Status screen has an added report “Throughput by QoS with an
updated description of “By Modem”
Version 6.0.2 Functionality Enhancements
These features have been developed in response to customer feedback and market analysis for the purpose
of increasing the interoperability of the FX Series with other CEFD products and to broaden the scope of
environments where FX Series can be deployed.
This release adds the following new features:
Mesh Network Configuration
Mesh network optimization is now supported with two appliances at each site.
Multicator modifications
Configuration settings have been simplified and located on one main screen on the Web Admin
Guide. The Multicator icon will appear on a single screen if an in-path interface is enabled.
QOS modification for FTP
FTP is now an option on the QOS filter screen. If FTP is selected, the FX automatically tracks the data
ports associated with FTP transfers by monitoring the activity on the FTP control port, which is
defaulted to port 21 upon initial selection. The FTP control port may be changed.
WCCP is now enabled on FX Series Remote
WCCP functionality for the FX Series Remote is now available and follows the
configuration/installation patterns which have been available on the FX Series ADC.
Redundancy modifications
The process for setting up these options has been simplified.

Comtech EF Data / Stampede
FX Series Administration Guide - Version 6.2.2 xx
Chapter: Using This Document
Section: Release Notes MN-FXSERIESADM6 Rev 6
Version 6.0.1 Functionality Enhancements
This release added the following features:
Management Port
This release supports a dedicated management port. The administrative WEB GUI has been
enhanced to configure management port settings. Management traffic flows over a separate
routing table from the accelerated data traffic. The Administrative Web GUI can now optionally run
over HTTP/S.
Trunked VLAN Support
FX Series supports a trunked network, where multiple 802.1Q tagged VLANs flow thru the same
physical connection. To accomplish this, many aspects of the FX Series Remote FX Series ADC data
interception and acceleration was modified to retain the VLAN properties. Any accelerated data is
transmitted over the network on the same VLAN as the original, non-accelerated data.
. FX Series Release 6.0.1 provides:
•Support for 1024 active VLANs for IDs 2-4095.
•Support Virtual Routing and Forwarding (VRF) environments.
•Support display of tallies on a per-VLAN basis at ADC only (not Remote).
•Accelerated VLAN traffic will maintain original VLAN affinity.
•Private HTTP caches on a per VLAN basis
•Cached HTTP data will be segregated between VLANs.
VLAN addition and deletion configuration changes can be made without service loss or downtime. A
restart is not required for the changes to take effect.
Transparency
FX Series Release 6.0.1 provided:
•Ability to communicate between appliances using the same port as the original client connection.
•Ability to communicate between appliances using the original client source addresses.
•Ability to support active-active ADC configurations.
•Ability to optionally disable multiplexing of client connections.
Dynamic ACM QoS
•Special support was added to FX Series Release 6.0.1 ADC to continuously acquire the data rate of a
modem via SNMP connection. When the data rate changes the QoS rules are dynamically adjusted.
New fields were added to the Dynamic ACM page to configure the IP address of the modem, and
user name and password.
FaST Code Support
In prior releases, a “license” file was uploaded to the FX to enable functionality.
In FX Series Release 6.0.1 and above, this methodology is now superseded by FAST Codes.
The FX Series CLI and Administrative Web GUI have been enhanced to allow Fast code upgrades.