comwave DCM 476 User manual

Installation Guide DCM 476
Home Phone Internet

Package Contents
Internet Modem
POWER ADAPTOR
OUTPUT: 12V
ETHERNET CABLE
COMWAVE DCM 476
INTERNET MODEM
Optional Home Phone
POWER ADAPTOR
OUTPUT: 12V
ETHERNET CABLE
COMWAVE HOME
PHONE ADAPTER

Installation with Router
Continue to 1
step
Comwave
Internet
Modem
Computer
Comwave
Home Phone Adapter
*
When used with Comwave Home Phone service
*
Router
Telephone
Power Bar
with Surge Protector
2
step
7
step
6
step
8
step
Cable
Wall Jack
Wi-Fi
4
step
5
step
3
step
Wait!!
5 min.
Wait!! 5 min.
Wait!! 2 min.

1
step Shut down your computer.
2
step Connect the Comwave Internet Modem using a standard cable wire
(not supplied) to the Cable Wall Jack.
3
step Connect the supplied Ethernet cable from your Internet Modem to the
WAN port on your Router.
4
step (For Home Phone) Connect the supplied Ethernet cable from the LAN port
of your Router to the WAN port of the Home Phone Adapter.
5
step Connect an Ethernet cable from your computer to any available LAN port
on your Router.
6
step Connect the Internet Modem to the power bar and wait until the
ONLINE light turns on and wait 5 minutes.
7
step Connect the Router to the power bar and wait 2 minutes.
8
step (For Home Phone) Connect a telephone to the PHONE 1 port on the Home
Phone Adapter. Then connect power and wait 5 minutes for dial tone.
DO NOT DISCONNECT POWER as it may damage the Home Phone Adapter.
9
step Start your computer.

For further assistance, go to
www.comwave.net/help
DCM476