comwave SR515 User manual

For assistance, please call
416-663-9600
V2 - DSL
TV Bundle Installation Guide
TV |DSL INTERNET - SR515 |HOME PHONE - GS HT801
Items may not be exactly as shownItems may not be exactly as shown Items may not be exactly as shown
ETHERNET CABLE
ETHERNET CABLE
TELEPHONE CORD
POWER ADAPTER
POWER ADAPTER
POWER ADAPTER
COMWAVETV SET-TOP BOX
(ABOX M30)
REMOTE
(BATTERIES INCL.)
HDMI CABLE
INTERNET CABLE CONTENTS TV CONTENTS HOME PHONE CONTENTS
PACKAGE CONTENTS
INTERNET MODEM
HITRON CODA4680
HOME PHONE ADAPTER
GRANDSTREAM HT801
Items may not be exactly as shownItems may not be exactly as shown Items may not be exactly as shown
ETHERNET CABLE
ETHERNET CABLE
POWER ADAPTER
POWER ADAPTER
POWER ADAPTER
COMWAVETV SET-TOP BOX
(ABOX M30)
REMOTE
(BATTERIES INCL.)
HDMI CABLE
INTERNET CABLE CONTENTS TV CONTENTS HOME PHONE CONTENTS
PACKAGE CONTENTS
TELEPHONE CORD
INTERNET MODEM
SR515
HOME PHONE ADAPTER
GRANDSTREAM HT801
ADVANCED WI-FI SETTINGS
INTERNET MODEM
Ethernet Cable (Not Supplied)
COMWAVETV SETTOP BOX
HOME PHONE ADAPTER
Ethernet Cable (Supplied)
Ethernet Cable
(Supplied)
HDMI Cord (Supplied)
1
step Open your internet browser and
type http://192.168.17.1 in the
address bar.
2
step Enter your Username and
Password and click LOGIN to
proceed.
3
step Click on Wi-Fi in the local network
on left as shown in gure
3
step .
4
step Use caution when making any
changes.
5
step Click Save.
2
step
3
step
4
step
5
step
COMPLETE SETUP OVERVIEW
For advanced users wishing to change their network name (SSID)
and/or password, follow the steps below.

STEP A –INTERNET STEP B –PHONE
4
5
3Connect one end of the supplied Ethernet Cable to the
WAN port of the Home Phone Adapter and the other
to any LAN port on the modem.
4Connect your telephone to the PHONE port of the Home
Phone Adapter.
5Connect the Home Phone Adapter to power using the
supplied power adapter and wait 5 minutes for the phone
to register before use.
To test your phone line, pickup the phone receiver and
listen for a dial tone. If you have no dial tone, please call
Comwave support (phone number is on the back).
HOME PHONE ADAPTER
3
2
1
Telephone Cord (supplied)
INTERNET MODEM
INTERNET MODEM LED DETAILS
SR515
STEP B –PHONE
3
4
5
3Connect one end of the supplied Ethernet Cable to the
WAN port of the Home Phone Adapter and the other
to any LAN port on the modem.
4Connect your telephone to the PHONE port of the Home
Phone Adapter.
5Connect the Home Phone Adapter to power using the
supplied power adapter and wait 5 minutes for the phone
to register before use.
To test your phone line, pickup the phone receiver and
listen for a dial tone. If you have no dial tone, please call
Comwave support (phone number is on the back).
HOME PHONE ADAPTER
SETTING UP YOUR WI-FI
NOTE: FOR THE BEST TV EXPERIENCE, WE RECOMMEND THE INTERNET MODEM TO BE AS CLOSE AS POSSIBLE TO YOUR MAIN TV AND YOUR
COMWAVETV SETTOP BOX.
Once steps are completed, turn on your TV and select the correct HDMI input. Follow the on-screen instructions to connect ComwaveTV
to your network.
2
Computer
WPS Button (Not Supported)
STEP C –TV
6
8
7
INTERNET
MODEM
WIRED
SETUP
RECOMMENDED
6Using the supplied HDMI cable, connect one end to an HDMI
port on your TV and the other end to the ComwaveTV set-top
box. Note: Remember which HDMI port you used on your TV.
7(Wired Network - Recommended) Connect an Ethernet
cable from one end of the ComwaveTV set-top box
to any LAN port on the Modem.
8Connect the ComwaveTV set-top box to power using the
supplied power adapter.
Upon completion of set up, the following LED lights should be on
Wireless ON/OFF Button
Power Button
Network
Name
(SSID)
Wi-Fi
Password
Smart RG SR515
1Connect the Comwave Internet Modem using the supplied
telephone cord to the phone jack.
2Connect one end of the supplied Ethernet Cable to the
LAN port of the Internet Modem and the other end to
your computer. For Wi-Fi instructions see “SETTING UP
YOUR WI-FI”
2.1 Connect the Internet modem to power using the supplied
power adapter. Note: Please allow up to 5 minutes for your
modem to be operational.
Start your computer. You should be able to browse the
internet instantly.
The network name (SSID) and password are located on the bottom
of the modem. There are two to choose from. The 5GHz network
usually performs the best.
If you would like to change the network name (SSID) and password,
please see “ADVANCED WI-FI SETTINGS”

STEP A –INTERNET STEP B –PHONE
4
5
3Connect one end of the supplied Ethernet Cable to the
WAN port of the Home Phone Adapter and the other
to any LAN port on the modem.
4Connect your telephone to the PHONE port of the Home
Phone Adapter.
5Connect the Home Phone Adapter to power using the
supplied power adapter and wait 5 minutes for the phone
to register before use.
To test your phone line, pickup the phone receiver and
listen for a dial tone. If you have no dial tone, please call
Comwave support (phone number is on the back).
HOME PHONE ADAPTER
3
2
1
Telephone Cord (supplied)
INTERNET MODEM
INTERNET MODEM LED DETAILS
SR515
STEP B –PHONE
3
4
5
3Connect one end of the supplied Ethernet Cable to the
WAN port of the Home Phone Adapter and the other
to any LAN port on the modem.
4Connect your telephone to the PHONE port of the Home
Phone Adapter.
5Connect the Home Phone Adapter to power using the
supplied power adapter and wait 5 minutes for the phone
to register before use.
To test your phone line, pickup the phone receiver and
listen for a dial tone. If you have no dial tone, please call
Comwave support (phone number is on the back).
HOME PHONE ADAPTER
SETTING UP YOUR WI-FI
NOTE: FOR THE BEST TV EXPERIENCE, WE RECOMMEND THE INTERNET MODEM TO BE AS CLOSE AS POSSIBLE TO YOUR MAIN TV AND YOUR
COMWAVETV SETTOP BOX.
Once steps are completed, turn on your TV and select the correct HDMI input. Follow the on-screen instructions to connect ComwaveTV
to your network.
2
Computer
WPS Button (Not Supported)
STEP C –TV
6
8
7
INTERNET
MODEM
WIRED
SETUP
RECOMMENDED
6Using the supplied HDMI cable, connect one end to an HDMI
port on your TV and the other end to the ComwaveTV set-top
box. Note: Remember which HDMI port you used on your TV.
7(Wired Network - Recommended) Connect an Ethernet
cable from one end of the ComwaveTV set-top box
to any LAN port on the Modem.
8Connect the ComwaveTV set-top box to power using the
supplied power adapter.
Upon completion of set up, the following LED lights should be on
Wireless ON/OFF Button
Power Button
Network
Name
(SSID)
Wi-Fi
Password
Smart RG SR515
1Connect the Comwave Internet Modem using the supplied
telephone cord to the phone jack.
2Connect one end of the supplied Ethernet Cable to the
LAN port of the Internet Modem and the other end to
your computer. For Wi-Fi instructions see “SETTING UP
YOUR WI-FI”
2.1 Connect the Internet modem to power using the supplied
power adapter. Note: Please allow up to 5 minutes for your
modem to be operational.
Start your computer. You should be able to browse the
internet instantly.
The network name (SSID) and password are located on the bottom
of the modem. There are two to choose from. The 5GHz network
usually performs the best.
If you would like to change the network name (SSID) and password,
please see “ADVANCED WI-FI SETTINGS”

STEP A –INTERNET STEP B –PHONE
4
5
3Connect one end of the supplied Ethernet Cable to the
WAN port of the Home Phone Adapter and the other
to any LAN port on the modem.
4Connect your telephone to the PHONE port of the Home
Phone Adapter.
5Connect the Home Phone Adapter to power using the
supplied power adapter and wait 5 minutes for the phone
to register before use.
To test your phone line, pickup the phone receiver and
listen for a dial tone. If you have no dial tone, please call
Comwave support (phone number is on the back).
HOME PHONE ADAPTER
3
2
1
Telephone Cord (supplied)
INTERNET MODEM
INTERNET MODEM LED DETAILS
SR515
STEP B –PHONE
3
4
5
3Connect one end of the supplied Ethernet Cable to the
WAN port of the Home Phone Adapter and the other
to any LAN port on the modem.
4Connect your telephone to the PHONE port of the Home
Phone Adapter.
5Connect the Home Phone Adapter to power using the
supplied power adapter and wait 5 minutes for the phone
to register before use.
To test your phone line, pickup the phone receiver and
listen for a dial tone. If you have no dial tone, please call
Comwave support (phone number is on the back).
HOME PHONE ADAPTER
SETTING UP YOUR WI-FI
NOTE: FOR THE BEST TV EXPERIENCE, WE RECOMMEND THE INTERNET MODEM TO BE AS CLOSE AS POSSIBLE TO YOUR MAIN TV AND YOUR
COMWAVETV SETTOP BOX.
Once steps are completed, turn on your TV and select the correct HDMI input. Follow the on-screen instructions to connect ComwaveTV
to your network.
2
Computer
WPS Button (Not Supported)
STEP C –TV
6
8
7
INTERNET
MODEM
WIRED
SETUP
RECOMMENDED
6Using the supplied HDMI cable, connect one end to an HDMI
port on your TV and the other end to the ComwaveTV set-top
box. Note: Remember which HDMI port you used on your TV.
7(Wired Network - Recommended) Connect an Ethernet
cable from one end of the ComwaveTV set-top box
to any LAN port on the Modem.
8Connect the ComwaveTV set-top box to power using the
supplied power adapter.
Upon completion of set up, the following LED lights should be on
Wireless ON/OFF Button
Power Button
Network
Name
(SSID)
Wi-Fi
Password
Smart RG SR515
1Connect the Comwave Internet Modem using the supplied
telephone cord to the phone jack.
2Connect one end of the supplied Ethernet Cable to the
LAN port of the Internet Modem and the other end to
your computer. For Wi-Fi instructions see “SETTING UP
YOUR WI-FI”
2.1 Connect the Internet modem to power using the supplied
power adapter. Note: Please allow up to 5 minutes for your
modem to be operational.
Start your computer. You should be able to browse the
internet instantly.
The network name (SSID) and password are located on the bottom
of the modem. There are two to choose from. The 5GHz network
usually performs the best.
If you would like to change the network name (SSID) and password,
please see “ADVANCED WI-FI SETTINGS”

STEP A –INTERNET STEP B –PHONE
4
5
3Connect one end of the supplied Ethernet Cable to the
WAN port of the Home Phone Adapter and the other
to any LAN port on the modem.
4Connect your telephone to the PHONE port of the Home
Phone Adapter.
5Connect the Home Phone Adapter to power using the
supplied power adapter and wait 5 minutes for the phone
to register before use.
To test your phone line, pickup the phone receiver and
listen for a dial tone. If you have no dial tone, please call
Comwave support (phone number is on the back).
HOME PHONE ADAPTER
3
2
1
Telephone Cord (supplied)
INTERNET MODEM
INTERNET MODEM LED DETAILS
SR515
STEP B –PHONE
3
4
5
3Connect one end of the supplied Ethernet Cable to the
WAN port of the Home Phone Adapter and the other
to any LAN port on the modem.
4Connect your telephone to the PHONE port of the Home
Phone Adapter.
5Connect the Home Phone Adapter to power using the
supplied power adapter and wait 5 minutes for the phone
to register before use.
To test your phone line, pickup the phone receiver and
listen for a dial tone. If you have no dial tone, please call
Comwave support (phone number is on the back).
HOME PHONE ADAPTER
SETTING UP YOUR WI-FI
NOTE: FOR THE BEST TV EXPERIENCE, WE RECOMMEND THE INTERNET MODEM TO BE AS CLOSE AS POSSIBLE TO YOUR MAIN TV AND YOUR
COMWAVETV SETTOP BOX.
Once steps are completed, turn on your TV and select the correct HDMI input. Follow the on-screen instructions to connect ComwaveTV
to your network.
2
Computer
WPS Button (Not Supported)
STEP C –TV
6
8
7
INTERNET
MODEM
WIRED
SETUP
RECOMMENDED
6Using the supplied HDMI cable, connect one end to an HDMI
port on your TV and the other end to the ComwaveTV set-top
box. Note: Remember which HDMI port you used on your TV.
7(Wired Network - Recommended) Connect an Ethernet
cable from one end of the ComwaveTV set-top box
to any LAN port on the Modem.
8Connect the ComwaveTV set-top box to power using the
supplied power adapter.
Upon completion of set up, the following LED lights should be on
Wireless ON/OFF Button
Power Button
Network
Name
(SSID)
Wi-Fi
Password
Smart RG SR515
1Connect the Comwave Internet Modem using the supplied
telephone cord to the phone jack.
2Connect one end of the supplied Ethernet Cable to the
LAN port of the Internet Modem and the other end to
your computer. For Wi-Fi instructions see “SETTING UP
YOUR WI-FI”
2.1 Connect the Internet modem to power using the supplied
power adapter. Note: Please allow up to 5 minutes for your
modem to be operational.
Start your computer. You should be able to browse the
internet instantly.
The network name (SSID) and password are located on the bottom
of the modem. There are two to choose from. The 5GHz network
usually performs the best.
If you would like to change the network name (SSID) and password,
please see “ADVANCED WI-FI SETTINGS”

For assistance, please call
416-663-9600
V2 - DSL
TV Bundle Installation Guide
TV |DSL INTERNET - SR515 |HOME PHONE - GS HT801
Items may not be exactly as shownItems may not be exactly as shown Items may not be exactly as shown
ETHERNET CABLE
ETHERNET CABLE
TELEPHONE CORD
POWER ADAPTER
POWER ADAPTER
POWER ADAPTER
COMWAVETV SET-TOP BOX
(ABOX M30)
REMOTE
(BATTERIES INCL.)
HDMI CABLE
INTERNET CABLE CONTENTS TV CONTENTS HOME PHONE CONTENTS
PACKAGE CONTENTS
INTERNET MODEM
HITRON CODA4680
HOME PHONE ADAPTER
GRANDSTREAM HT801
Items may not be exactly as shownItems may not be exactly as shown Items may not be exactly as shown
ETHERNET CABLE
ETHERNET CABLE
POWER ADAPTER
POWER ADAPTER
POWER ADAPTER
COMWAVETV SET-TOP BOX
(ABOX M30)
REMOTE
(BATTERIES INCL.)
HDMI CABLE
INTERNET CABLE CONTENTS TV CONTENTS HOME PHONE CONTENTS
PACKAGE CONTENTS
TELEPHONE CORD
INTERNET MODEM
SR515
HOME PHONE ADAPTER
GRANDSTREAM HT801
ADVANCED WI-FI SETTINGS
INTERNET MODEM
Ethernet Cable (Not Supplied)
COMWAVETV SETTOP BOX
HOME PHONE ADAPTER
Ethernet Cable (Supplied)
Ethernet Cable
(Supplied)
HDMI Cord (Supplied)
1
step Open your internet browser and
type http://192.168.17.1 in the
address bar.
2
step Enter your Username and
Password and click LOGIN to
proceed.
3
step Click on Wi-Fi in the local network
on left as shown in gure
3
step .
4
step Use caution when making any
changes.
5
step Click Save.
2
step
3
step
4
step
5
step
COMPLETE SETUP OVERVIEW
For advanced users wishing to change their network name (SSID)
and/or password, follow the steps below.

For assistance, please call
416-663-9600
V2 - DSL
TV Bundle Installation Guide
TV |DSL INTERNET - SR515 |HOME PHONE - GS HT801
Items may not be exactly as shownItems may not be exactly as shown Items may not be exactly as shown
ETHERNET CABLE
ETHERNET CABLE
TELEPHONE CORD
POWER ADAPTER
POWER ADAPTER
POWER ADAPTER
COMWAVETV SET-TOP BOX
(ABOX M30)
REMOTE
(BATTERIES INCL.)
HDMI CABLE
INTERNET CABLE CONTENTS TV CONTENTS HOME PHONE CONTENTS
PACKAGE CONTENTS
INTERNET MODEM
HITRON CODA4680
HOME PHONE ADAPTER
GRANDSTREAM HT801
Items may not be exactly as shownItems may not be exactly as shown Items may not be exactly as shown
ETHERNET CABLE
ETHERNET CABLE
POWER ADAPTER
POWER ADAPTER
POWER ADAPTER
COMWAVETV SET-TOP BOX
(ABOX M30)
REMOTE
(BATTERIES INCL.)
HDMI CABLE
INTERNET CABLE CONTENTS TV CONTENTS HOME PHONE CONTENTS
PACKAGE CONTENTS
TELEPHONE CORD
INTERNET MODEM
SR515
HOME PHONE ADAPTER
GRANDSTREAM HT801
ADVANCED WI-FI SETTINGS
INTERNET MODEM
Ethernet Cable (Not Supplied)
COMWAVETV SETTOP BOX
HOME PHONE ADAPTER
Ethernet Cable (Supplied)
Ethernet Cable
(Supplied)
HDMI Cord (Supplied)
1
step Open your internet browser and
type http://192.168.17.1 in the
address bar.
2
step Enter your Username and
Password and click LOGIN to
proceed.
3
step Click on Wi-Fi in the local network
on left as shown in gure
3
step .
4
step Use caution when making any
changes.
5
step Click Save.
2
step
3
step
4
step
5
step
COMPLETE SETUP OVERVIEW
For advanced users wishing to change their network name (SSID)
and/or password, follow the steps below.

For assistance, please call
416-663-9600
V2 - DSL
TV Bundle Installation Guide
TV |DSL INTERNET - SR515 |HOME PHONE - GS HT801
Items may not be exactly as shownItems may not be exactly as shown Items may not be exactly as shown
ETHERNET CABLE
ETHERNET CABLE
TELEPHONE CORD
POWER ADAPTER
POWER ADAPTER
POWER ADAPTER
COMWAVETV SET-TOP BOX
(ABOX M30)
REMOTE
(BATTERIES INCL.)
HDMI CABLE
INTERNET CABLE CONTENTS TV CONTENTS HOME PHONE CONTENTS
PACKAGE CONTENTS
INTERNET MODEM
HITRON CODA4680
HOME PHONE ADAPTER
GRANDSTREAM HT801
Items may not be exactly as shownItems may not be exactly as shown Items may not be exactly as shown
ETHERNET CABLE
ETHERNET CABLE
POWER ADAPTER
POWER ADAPTER
POWER ADAPTER
COMWAVETV SET-TOP BOX
(ABOX M30)
REMOTE
(BATTERIES INCL.)
HDMI CABLE
INTERNET CABLE CONTENTS TV CONTENTS HOME PHONE CONTENTS
PACKAGE CONTENTS
TELEPHONE CORD
INTERNET MODEM
SR515
HOME PHONE ADAPTER
GRANDSTREAM HT801
ADVANCED WI-FI SETTINGS
INTERNET MODEM
Ethernet Cable (Not Supplied)
COMWAVETV SETTOP BOX
HOME PHONE ADAPTER
Ethernet Cable (Supplied)
Ethernet Cable
(Supplied)
HDMI Cord (Supplied)
1
step Open your internet browser and
type http://192.168.17.1 in the
address bar.
2
step Enter your Username and
Password and click LOGIN to
proceed.
3
step Click on Wi-Fi in the local network
on left as shown in gure
3
step .
4
step Use caution when making any
changes.
5
step Click Save.
2
step
3
step
4
step
5
step
COMPLETE SETUP OVERVIEW
For advanced users wishing to change their network name (SSID)
and/or password, follow the steps below.