comwave SR516 User manual

SR516 Installation Guide
Internet

Package Contents
2.
SR516
INTERNET MODEM
Package Contents
ETHERNET CABLE
Items may not be exactly as shown.
1
2
3
4
DSL Used to connect your Internet Modem to your
Internet Line using the Telephone Cord supplied.
LAN Used to connect to your computer using the
Ethernet Cable supplied.
WAN Currently not supported.
DC 12V Used to connect to a power source using the
Power Adapter supplied.
3
1 2 4
TELEPHONE CORD
POWER ADAPTER
OUTPUT: 12V

3.
LED Light Indicators
Wireless ON/OFF Button
Power Button
Please follow the step by step instructions on the following pages.

Package Contents
4.
Power Bar
with Surge Protector
Comwave
VoIP Adapter
Telephone
Internet
Modem
Computer
7
step
6
step
Continue to 1
step
Phone Jack
Internet
Line
2
step
5
step
4
step

5.
Installation Step-by-Step
1
step To begin installation, shut down your computer.
2
step Connect the Comwave Internet Modem using the supplied telephone cord
to the phone jack.
3
step Connect the supplied Ethernet Cable from the LAN port of the Comwave
Internet Modem to your computer.
4
step (For Home Phone) Connect the supplied Ethernet cable from the LAN port of
your Comwave Internet Modem to the WAN port of the Home Phone Adapter.
5
step Connect the Comwave Internet Modem to a power outlet.
Note: Please allow up to 5 minutes for your modem to be operational.
6
step (For Home Phone) Connect a telephone to the PHONE 1 port on the Home
Phone Adapter. Then connect power to the Home Phone Adapter and wait
5 minutes for a dial-tone. DO NOT DISCONNECT POWER as it may damage
the Home Phone Adapter.
7
step Start your computer. You should be able to browse the Internet instantly.
Can’t Access
the Internet?
1Unplug the power to your
Comwave Internet modem,
home phone adapter and
shut down your computer.
2Wait 30 seconds and then
plug your Comwave Internet
modem’s power cord back
into the power outlet.
3Wait until the LED light
indicators on your Comwave
Internet modem indicate the
modem is operational. This
may take up to 5 minutes.
4Start your computer and
plug in the home phone
adaptor into a power outlet.
5Open your browser and start
surng the Internet. Check
for a dial tone.
Still unable to surf the Internet?
Call us at 1-866-210-9149.
WE’LL GET YOU BACK UP ONLINE!

6.
Wi-Fi Settings
The network name (SSID) and password is on the back
of the modem. There are two to chose from. The 5GHz
network usually performs the best.
If you would like to change the network name (SSID) and
password, please visit comwave.net/support-internet/
Network
Name
(SSID)
Wi-Fi
Password
Smart RG SR516

Package Contents
7.
Advanced Wi-Fi Settings
1
step Open your internet browser and
type http://192.168.17.1 in the
address bar.
2
step Enter your Username and
Password and click LOGIN to
proceed.
3
step Click on Wi-Fi in the local network
on left as shown in gure
3
step .
4
step Use caution when making any
changes.
5
step Click Save.
2
step
3
step
4
step
For advanced users wishing to change their network name
and/or password, follow the steps below.
5
step

Need more help?
1-866-210-9149
SR516 Installation Guide