Conceptronic 100BRS4 User manual

ENGLISH
- 1-
Conceptronic 100BRS4
! NOTE !
ENGLISH
! Note: For other languages (Dutch, Spanish, German, French, Italian and
Portuguese) and more detailed instructions on configuring and using the Broadband
Firewall Gateway, please refer to the manual on the provided CD-ROM.
NEDERLANDS
! Opmerking: Voor andere talen (Nederlands, Spaans, Duits, Frans, Italiaans en
Portugees) en uitgebreide informatie over de configuratie en het gebruik van de
Broadband Firewall Gateway zie de handleiding op de meegeleverde cd-rom.
ESPAÑOL
¡ Nota: Para otros idiomas (holandés, español, alemán, francés, italiano y
portugués) e instrucciones más detalladas sobre la configuración y el empleo del
Broadband Firewall Gateway (pasarela cortafuego de banda ancha), consulte el
manual que incluye el CD-ROM provisto.
DEUTSCH
! Hinweis: Andere Sprachen (Englisch, Holländisch, Spanisch, Französisch,
Italienisch und Portugiesisch) und genauere Anweisungen zur Konfiguration und
Benutzung des Broadband Firewall Gateway, sehen Sie bitte im Handbuch auf
der mitgelieferten CD-ROM nach.
FRANÇAIS
! Remarque: Pour obtenir de plus amples informations concernant d’autres langues
(néerlandais, espagnol, allemand, français, italien et portugais) ou les instructions
relatives à la configuration et l’utilisation de Broadband Firewall Gateway, veuillez
consulter le manuel fourni sur le CD-ROM.
ITALIANO
! NB: Per altre lingue (Olandese, Spagnolo, Tedesco, Francese, Inglese e
Portoghese) e per istruzioni più particolareggiate relative al modo di configurazione
o di uso del Gateway Firewall a banda larga, vi preghiamo di consultare il
manuale sul CD-ROM accluso.
PORTUGUÈS
! Nota: Para outras línguas (Holandês, Espanhol, Alemão, Francês, Italiano e
Português) e mais instruções pormenorizadas sobre a configuração e utilização do
Broadband Firewall Gateway, por favor consulte o manual no CD-ROM
fornecido.

ENGLISH
- 2-
Conceptronic 100BRS4
Quick Start Guide
Congratulations on the purchase of your
Conceptronic Broadband router.
The enclosed Hardware Installation Guide gives you a step by step explanation of
how to install the Conceptronic Broadband Router 100BRS4 on your Notebook/PC.
When problems occur, we advise you to go to our support-site 2-Tech (go to
www.conceptronic.net, ‘Technical support’ and click ‘on-line support’.) Here you will
find a lot of possibilities to solve your problems.
In order to provide the requested support we need the following details from you:
•A clear description of the problem;
•Version number of the drivers you are using (always check the Conceptronic
website to see wether you are using the latest version);
•Type of Notebook/PC you are using;
•Operating system you are using
For more information about Conceptronic products, please visit the Conceptronic
Web Site: www.conceptronic.net
The Software installation as described below, may be slightly different from
the installation on your computer. This depends on the Windows version you
are using.

ENGLISH
- 3-
1. The Front Panel LEDs
LED Meaning
1Power Lit green when AC power is connected.
2LAN 1
3LAN 2
4LAN 3
5LAN 4
Lit green when connected at 100 Mbps.
Lit orange when connected at 10 Mbps.
Flashes when sending/receiving data.
6WAN Lit when connected to a WAN device.
Flashes when sending/receiving data.
7PPP/SYS
Lit green when using
PPPoE or PPTP client
from router.
Lit orange when system ready.
2. The Rear Ports
Power
(jack) Connect the supplied power adapter to this jack.
WAN
(RJ-45
connector)
Connect an UTP Ethernet
cable or crossover cable to this
port when connecting to the
Internet or making other WAN
connections.

ENGLISH
- 4-
LAN
(RJ-45
connector)
Connect an UTP Ethernet
cable to these four ports when
connecting to a LAN of
10Mbps or 100Mbps such as
an office or home network.
3. Connecting the Broadband Firewall Gateway
Refer to the following steps to connect the Broadband Firewall Gateway to a WAN
(Wide Area Network) and a LAN (Local Area Network):
1. Connect the Broadband Firewall Gateway as shown below.
2. Power on the device.
3. Ensure the Power, LAN, and WAN LEDs are lit.

ENGLISH
- 5-
4. Configuring PC in Windows 95/98(SE)/ME
1. Go to Start / Settings / Control
Panel. In the Control Panel,
double-click on Network and
choose the Configuration tab.
2. Select TCP/IP ->
NE2000 Compatible, or any
Network Interface Card (NIC) in
your PC.
3. Select the Obtain an IP
address automatically radio
button.

ENGLISH
- 6-
4. Then select the DNS
Configuration tab.
5. Select the Disable DNS radio
button and click Ok to finish the
configuration.
5. Configuring PC in Windows NT4.0
1. Go to Start / Settings / Control
Panel. In the Control Panel,
double-click on Network and
choose the Protocols tab.
2. Select TCP/IP Protocol and
click Properties.

ENGLISH
- 7-
3. Select the Obtain an IP
address from a DHCP server
radio button and click Ok.
6. Configuring PC in Windows 2000
1. Go to Start / Settings / Control
Panel. In the Control Panel
double-click on Network and
Dial-up Connections.
2. Double-click Local Area
Connection.

ENGLISH
- 8-
3. In the Local Area Connection
Status window click Properties.
4. Select Internet Protocol
(TCP/IP) and click Properties.

ENGLISH
- 9-
5. Select the Obtain an IP
address automatically and the
Obtain DNS server address
automatically radio buttons.
6. Click Ok to finish the
configuration.
7. Configuring PC in Windows XP
1. Go to Start / Control
Panel (in Classic
View). In the Control
Panel, double-click on
Network Connections.
2. Double-click Local Area
Connection.

ENGLISH
- 10 -
3. In the Local Area
Connection Status
window, click
Properties.
4. Select Internet
Protocol (TCP/IP) and
click Properties.