CONCORD QC5000 User manual

WiFi USB Dongle
for DVRs & NVRs QC5000
Please disconnect the Ethernet cable from your DVR/NVR.
1. Connect the USB Wi-Fi Dongle to a spare USB port on your
DVR/NVR.
2. Right-click the mouse in Live-View mode to display the
Menu Bar. Click “Setup”, then click “Network” then click
“Wireless”.
3. Click the “Scan” button. A list of Wi-Fi networks that your
device detects will be shown. Select your Wi-Fi network, then
click the “Save” button.
4. Enter the password for your Wi-Fi network, then click the
“Connect” button. Make sure the password is correct before
proceeding (click the eye icon to display the password).
Please turn over for more instructions >

Distributed by:
Electus Distribution Pty. Ltd.
320 Victoria Rd, Rydalmere NSW 2116 Australia
Ph: 1300 762 627 Fax: [phone] Made in China
5. TheDVR/NVR will connect to your Wi-Fi network. Click “OK”
to continue (if the connection has failed, check that the
password is correct).
6. The Link Status will change to Connected, indicating a
successful connection. Click “Apply” to save the settings.
If the Wi-Fi dongle needs to be removed, click the “USB Wi-Fi”
button on the Menu Bar (next to the date & time), then click
“Safely remove USB Devices”.
Note: Ensure the latest version of Concord software is installed
prior to use.