Connects2 CAM-VW1-AD User manual

Volkswagen
Golf (MK VI) 2008 - 2012
Passat 2008>
User Manual
Prior to Installation
Read the manual prior to installation. Technical knowledge is necessary for installation.
The place of installation must be free of moisture and away from heat sources. Please
ensure you use the correct tools to avoid damage to the vehicle or product.
Connects2 can not be held responsible for the installation of this product.
Technical Support
Connects2 want to provide a fast and suitable resolution should you encounter any tech-
nical issues. With this in mind, when contacting Connects2, try to provide as much Infor-
mation as possible. This will speed up the process and help us to help you.
Please use our dedicated online technical support centre: support.connects2.com
Reverse Camera Add On Interface
For Volkswagen Vehicles
APPLICATION:
DISCLAIMER:
CAM-VW1-AD
Allows for the connection of a video source in conjunction with a factory tted
Volkswagen reverse camera

www.connects2.com
2
Connects2Vision
CONTENTS
- Reverse Camera Add On Interface
- Instructions
INSTALLATION
1. Connect the yellow RCA connector to the RCA output connector on the video
source
2. Connect the black ying wire to Ground
3. Connect the red ying wire to Switched Reverse 12V
4. Slide the plastic cover from the 26 pin amp plug, located into the Quadlock
(Fakra) plug and remove pins 11, 12, 13, 25 and 26. (NB: Note the original
Volkswagen cable colours to the pin numbers)
5. Use the Connection Assignment (below) to connect the open Volkswagen
reverse camera wires with the 2 and 3 pin sockets from the CAM-VW1-AD interface.
Subscribe to our YouTube Channel for installation
guides and tips... www.youtube.com/connects2