Connects2 CAM-PE2 User manual

www.c2vision-eu.comwww.c2vision-eu.com
Image Sensor: 1/3” CMOS
TV Lines: 700
Resolution: 500 x 582
Minimum Illumination: 0 Lux
TV System: PAL
Waterproof Rating: IP69K
Viewing Angle: 170 Degree
Automatic Back Light Compensation
Mirror Image Available
Operating Voltage: 12V DC (Negative Ground)
Current Consumption: 37mA @ 13.8V
Operating Temperature: -30 Degrees C to +70 Degrees C
User Manual
Prior to Installation
Read the manual prior to installation. Technical knowledge is necessary for installation.
Please ensure you use the correct tools to avoid damage to the vehicle or product.
Connects2 can not be held responsible for the installation of this product.
Technical Support
Connects2 want to provide a fast and suitable resolution should you encounter any
technical issues. With this in mind, when contacting Connects2, try to provide as
much Information as possible. This will speed up the process and help us to help you.
Please use our dedicated online technical support centre: support.connects2.com
High Level Brake Light Reverse Camera
Peugeot Expert, Expert Combi, Traveller 2016>
PRODUCT FEATURES:
DISCLAIMER:
CAM-PE2

2
Connects2Vision
www.c2vision-eu.com
• 1m Camera with cable to mini Male 4pin connector
• 20cm camera connection cable with mini Female 4pin connector to Male 4
pin ‘screw on’ connector
• 10m Female 4 pin ‘screw on’ connector to Male Video RCA plus 12V+ &
Ground wire connections for power
• Instructions
CONTENTS
INSTALLATION
1. Remove the relevant brake light housing from the vehicle and carefully re-
move the bulbs/bulb holder assembly.
2. Insert the bulbs/bulb holder assembly into the camera and ret to the vehicle
taking care not to trap any cables.
3. Connect the camera cable to the camera connection cable.
4. Connect the camera connection cable to the display monitor using an
extension - 4pin to RCA convertor cable and ensure that the image is
displayed correctly.
Subscribe to our YouTube Channel for installation
guides and tips... www.youtube.com/connects2