Connex E-LUMINATE CP202 User manual

INSTRUCTION MANUAL
Please read and retain these instructions for future reference.
CP202
E-LUMINATE
Tripod Projector Screen 100 16:9
TM

• 100″ Screen Size
• 16:9 Aspect Rao
• 0.4mm Thick Ma White Fabric
• Connex E-Luminate Tripod Projector Screen 100”–16:9
• Instrucon Manual
• 64 Octagonal Housing Case
• Ma White Fabric
• Fabric thickness: 0.4mm
• Foldable Tripod
• Black Framed screen
• Screen size: 2214 x 1245mm (Open)
• Weight: 3.2 kg
1
PACKAGE CONTENTS
SPECIFICATIONS
HIGHLIGHTS

Choose a suitable place for installing, open the tripod feet rst, pull
out the upper bar to a suitable height and lock it, hang the pulling rod
above the goose neck and adjust the screen height, then nally x /
lock it at a sased posion which you want. Aer using, release the
screen and put it back into the housing.
TRIPOD
HOUSING
SCREEN
BLACK BORDER
2
INSTRUCTIONS
INSTALLATION

3
CARE & MAINTENANCE
• The screen can not be folded. Do not use fingers or hard objects
to touch the screen surface.
• Keep the screen far away from the high temperature objects
or fire.
• After using put the screen back to the housing in order to avoid
being damaged. If not in use, please remove the screen from the
wall and pack it in a carton.
• If the power cable is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
WARNING: Important safety instructions. It is important for
the safety of persons to follow these instructions. Save these
instructions.
• Do not allow children to play with fixed controls, keep remote
controls away from children.
• Frequently examine the installation for imbalance and signs of
wear or damage to cables and springs.
• Do not use if repair or adjustment is necessary; if the supply cord
is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
This projector screen is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the projector screen by
a person responsible for their safety.
Children should be supervised to ensure that they do not play
with the the projector screen.

4
• Cleaning: Wipe down the surface of your E-Luminate using a soft,
slightly damp cloth. To clean the projector screen, use a dry
microfiber cloth and gently wipe until it is clean.
• Do not use any harsh or abrasive cleaning chemicals or materials
on your E-Luminate as doing so may damage or scratch the
surface finish.
• Do not expose your E-Luminate to direct sunlight or high
temperatures for extended periods of time.
• Do not store in temperatures over 60° C.
Do not dispose of electrical appliances as unsorted
municipal waste, use separate collecon facilies. Contact
your local government for informaon regarding the
collecon systems available. If electrical appliances are
disposed of in landlls or dumps, hazardous substances
can leak into the groundwater and get into the food chain,
damaging your health and well-being.
All product and company names are trademarks™ or registered®
trademarks of their respecve holders. Use of them does not imply
any aliaon with or endorsement by them.
DISCLAIMER
CLEANING INSTRUCTIONS
ENVIRONMENTALLY FRIENDLY DISPOSAL

5
WARRANTY
This Connex Projector Screen comes with a standard 12-month
limited warranty against manufacturing defects and faults.
Should your Connex Projector Screen be unboxed with any faulty
parts, poor nishing or visible damage, or fail to perform due to a
manufacturing defect or poor workmanship, please return it with
your proof of purchase (ll slip or invoice) to the store of purchase
for an exchange, or repair, depending on the store’s returns policy.
This warranty commences from the date of purchase.
Kindly retain your proof of purchase as well as the packaging for your
warranty period.
NOTE:
The warranty does not apply to a product that:
a.) Has failed due to excessive wear and tear beyond what is
considered to be reasonable.
b.) Has been misused or neglected.
c.) Has been damaged accidentally or by Force Majeure including re
and ooding.
d.) Has been used or operated contrary to operang or maintenance
instrucons outlined in this manual.
The Store of Purchase / Seller cannot accept any returned products
that have not been returned in accordance with this warranty or
which does not follow their own Returns Policy. Please refer to the
Store of Purchase / Sellers Returns Policy for details.