Conquer CQL1574-B User manual

CQL1574-B Bluetooth Speaker
Instruction Manual (Read before proceeding)
Power:
zPlease charge your Bluetooth speaker fully before its first use.
To charge the battery:
zUsing a Micro USB cable (included), insert the USB power cable into the micro USB port
located on the back of the speaker. Connect the other end of the USB cord into a powered
USB source such as a computer, laptop or USB AC adapter.
zWhen your Bluetooth speaker is charging, the indicator light will turn red.
zOnce your Bluetooth speaker is fully charged, the red light will turn off.
Playing Music Via Bluetooth
zTurn your Bluetooth speaker on by sliding the power switch located on the back of the
speaker to ‘ON’ position.
zThe blue indicator light will flash quickly. This indicates that the speaker is in pairing mode
and is searching for your Bluetooth device.
zMake sure the Bluetooth function on your device is turned on.
zSearch the speaker named,”SB-01”.
zOnce you have selected the speaker, your device will pair without a password. (If your
device prompts for a password, enter the password”0000”.
zOnce your speaker is paired, the blue indicator light will begin to flash slower.
zStart playing music on your device. Make sure that you keep your device within a 33 foot
range of your Bluetooth speaker.
zAdjust the volume of your device to a comfortable level.
zTurn off the unit when not in use.
Light Operation
zWhen turn on the unit, the light will light up automatically.
zPress the light mode button, and you can change the light mode as you need.
zWhen turn off the unit, the light will turn off accordingly.
Warning:
zThis is not a toy. Please keep away from children.
zPlease keep away from water / heat.
zLow power may cause poor connection or may cause the Bluetooth function to not work.

FCC Statement
zChanges or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
zThis equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the
zinstructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
z-- Reorient or relocate the receiving antenna.
z-- Increase the separation between the equipment and receiver.
z-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
z-- Consult the dealer or an experienced radio/TV technician for help
zThis device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions (1)this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.