Conquer CQL1572-B User manual

CQL1572-B Bluetooth Speaker
Instruction Manual (Read before proceeding)
Power:
zPlease charge your Bluetooth speaker fully before its first use.
zOperates using an internal rechargeable Lithium battery.
To charge the battery:
zUsing a Micro USB cable (included), insert the USB power cable into the micro USB
port located on the back of the speaker. Connect the other end of the USB cord into a
powered USB source such as a computer, laptop or USB AC adapter.
zWhen your Bluetooth speaker is charging, the indicator light is red.
zOnce your Bluetooth speaker is fully charged, the red light will turn off.
Playing Music Via Bluetooth
zTurn your Bluetooth speaker on by sliding the power switch located on the back of the
speaker to ‘ON’ position.
zThe indicator light is blue. This indicates that the speaker is in pairing mode and is
searching for your Bluetooth device.
zMake sure the Bluetooth function on your device is turned on.
zSearch the speaker named,”SB-01”.
zOnce you have selected the speaker, your device will pair without a password. (If your
device prompts for a password, enter the password”0000”.
zOnce your speaker is paired, the indicator light will begin to flash blue slower.
zStart playing music on your device. Make sure that you keep your device within a 33
foot range of your Bluetooth speaker.
zAdjust the volume of your device to a comfortable level.
zTurn off the unit when not in used.
Auxiliary in Function
zPower the speaker on, connect the micro USB to auxiliary cable into the speaker’s
micro USB port and plug the other end into your device’s auxiliary port.
zThe speaker will turn into auxiliary-in function automatically from Bluetooth mode.
zDisconnect the cable when finished.
Warning:
zThis is not a toy. Please keep away from children.
zPlease keep away from water / heat.
zLow power may cause poor connection and/or may cause the Bluetooth function to
not work

FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions (1)this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation