Conquer AR517/CQL1590-B User manual

AR517/CQL1590-B Bluetooth Speaker
Instruction Manual (Read before proceeding)
Power:
zWorks on internal rechargeable Lithium battery. Please charge your speaker fully
before first use. To charge the battery :
Using a Micro USB cable (included), insert the jack into ”Charging” jack located at the
back of the unit and then plug the USB connecter into the USB port on a computer for
charging.
zA red light at the back will indicate the charging situation. When battery is full, the red
light will turn off automatically.
Bluetooth Speaker Operation
zTurn on the unit by pushing the switch at the back. ABlue light aside will start blinking
to indicate the speaker is in paring mode and searching for your Bluetooth mobile
device.
zBluetooth speaker device name is “SB-01”, connect it via the option menu of your
mobile device, pairing mode is 0000 if any is required. The Blue light will begin to
flashing slowly after pair is complete.
zStart playing music on your device. Keep your device within 33feet (10m) of your
speaker.
zAdjust the volume of your device to a comfortable level.
zTurn off the unit when not in used.
Caution:
zThis is not a toy. Please keep away from children.
zPlease keep away from water / heat.
zLow power may cause poor connection even no working of Bluetooth.
zDo not overcharge the battery.

FCC Statement
zChanges or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
zThis equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the
zinstructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
z-- Reorient or relocate the receiving antenna.
z-- Increase the separation between the equipment and receiver.
z-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
z-- Consult the dealer or an experienced radio/TV technician for help
zThis device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions (1)this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
zThis device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
