LOXONE NFC CODE TOUCH TREE User manual

NFC CODE
TOUCH TREE
www.loxone.com
GET IN TOUCH!
o[e-mail]
www.loxone.com/contact
NEED HELP?
For further information and documentation visit:
www.loxone.com/help/NFC_Code_Touch
Part No.: 100300 (white)
Part No.: 100306 (anthracite)
Access Possibilities NFC, Key Code
Power Supply 9...28VDC SELV/PELV
Power Consumption typ. 0.05W, max. 0.8W
(while reading NFC)
Safety Rating IP44
Ambient Temperature -20...55°C / -4...131°F
Humidity 95% r.H. (non condensing)
Maintenance &
Cleaning
This device is free of
maintenance and may only be
cleaned with a dry cloth.
Technical Specifi cations
Wire Diameter 0.32...0.08mm2/
AWG22...AWG28
Exposed Wire Length 3.5mm / 0.14“
Push-In Technology
To make connection, insert the
wire; to remove the wire twist
and pull at the same time.
Connection
Part No.: 100300 (white)
Part No.: 100306 (anthracite)

About the product
Get access to your Smart Home with encrypted or unencrypted NFC
tags, via your NFC enabled smartphone or through your own unique
key code.
Features
• Authentication via encrypted and unencrypted NFC Tags or NFC
enabled smartphones or key code
• Supports permanent, disposable or time-limited key codes
• Universal button
• Alarm-authentication
Important Information
• For security reasons, we strongly suggest you only use encrypted
NFC tags for access control from Loxone.
Installation
Install the mounting frame of the NFC Code Touch on the desired
installation place. Power up the device and pair it with your Miniser-
ver in Loxone Cong. To nish the installation, attach the NFC Code
Touch as shown on the mounting frame.
Attach hereNFC Sensor Universal
Button