CONTINENTAL EDISON CEKT5B User manual

CEKT5B
Guide d’utilisation
Instructions for Use
www.continentaledison.fr
Balance Culinaire
Kitchen Scale

1 2
Alimentation
Insérez la pile en respectant la polarité.

3 4
F.En appuyant sur la touche "MODE"
vous passerez de la mesure de
poids à la mesure de volume pour
de l'eau ou du lait.

5 6

7 8
1. Indicate volume of water and milk
2. Two weight unit systems g｡｢lb:oz convertible
3. Two volume unit systems ml｡｢fl'oz convertible
4. Low battery power/Overload indication
5. With high precision strain gauge sensor
6. With tare function
7. Auto off
FEATURES
AA/AAA
AA/AAA
TO INSTALL OR REPLACE BATTERY
The battery type of scale depends on the product structure. Find the
battery type of your scale according to the following pictures, then
install and replace battery as described.
1. 1x3V CR2032 lithium batteries(included). Remove isolation sheet
before use;
2. 2x1.5V(AA/AAA)batteries(excluded). Remove package foil before use;
PIC 2
A.Take out used batteries, with the aid of a sharp
object if needed.
B.Install new batteries by putting one side of the
battery down first and pressing down the other
side. (Please observe the polarity)
PIC 1
Open the battery case cover at the bottom
of scale:
A. Take out the used battery with the aid of
a sharp object, as shown in picture.
B. Install new battery by putting one side of
the battery beneath the battery baffle and
then pressing down the other side.
Battery baffle
CONTINENTAL EDISON
120-126 Quai de Bacalan
CS11584
33000 Bordeaux
IMPORTE PAR :
A.M.C.
123 Quai Jules Guesde
94400 VITRY SUR SEINE
France
LOT #: amc052019

910
A. Place the scale on a solid and flat
surface.
B. Place bowl (if used) on the scale
before turning on the scale.
C. Press "ON/OFF" to enter weighing
mode.
D. Wait until LCD shows all information.
E. Load weighing object on to start
weighing,LCD will show the weight
reading.
F. If the weighing object is water or
milk, press MODE button to choose
volume mode and view the volume
of weighing object.
TO START WEIGHING
1. Weighing mode
* When setting g as weight unit, the default volume unit is ml;
* When setting lb:oz as weight unit, the default volume unit is fl'oz.
Remark: The unit system of scale depends on sales destination or the requirement of distributor.
If the scale is with both unit systems of Metric (g, ml) or Imperial (lb:oz,
fl'oz), press MODE button to choose working mode (weight, milk volume,
water volume), then press unit conversion button to convert between
two systems. Take the conversion of weight unit for example:
lb
OZ
OZ
fl
g
ml
lb
OZ
OZ
fl
g
ml
UNIT CONVERSION BUTTON
At the bottom of scale,you can find a unit
conversion button as shown in picture.
LCD
lb
OZ
OZ
fl
g
ml
Weight Milk Water
Weight mode
Milk volume mode
Weight unit(g)
Volume unit(ml)
Volume unit(fl'oz)
Weight unit(lb:oz)
Water volume mode
Negative Value
Tare Weight
Zero Weight
lb
OZ
OZ
fl
g
ml
Weight Milk Water
Weight mode Milk volume mode Water volume mode
WORKING MODES
TO CONVERT WEIGHT UNIT
Weight Milk Water Weight Milk Water

11 12
Condition 2: "TARE" function
When total sum of all loads on scale
＞4% of scale's max.weight capacity.
(4%=80g when capacity is 2000g;
200g when capacity is 5000g)
Under this condition:
By pressing ZERO, you can see the
total weight of all loads on the scale.
If you want to weigh more loads,
just press ZERO to reset LCD
reading to '0' again.
"ZERO" OR "TARE" FUNCTION
To weigh different loads consecutively without removing loads from the scale.
Put first Load on the scale, get weight reading. Press ZERO button to reset the
LCD reading to "0" before adding next load. You can repeat this operation.
Condition 1: "ZERO" function
When total sum of all loads on scale
≤4% of scale's max.weight capacity.
(4%=80g when capacity is 2000g;
200g when capacity is 5000g)
g
Weight Milk Water
ZERO
ZERO
g
Weight Milk Water
g
Weight Milk Water
g
Weight Milk Water
g
Weight Milk Water
g
Weight Milk Water
g
Weight Milk Water
LCD will show “-----” or “0g” each time ZERO
is perssed. “-----” means not stable, please
wait for a moment. “0g” and meanwhile an
icon “o” on lower left corner of LCD mean
“ZERO” function is active. Max.weight capacity
remains unchanged.
LCD will show “-----” or “0g” each time ZERO
is pressed. “-----” means not stable, please
wait for a moment. “0g” and meanwhile an
icon “TARE” on upper left corner of LCD
mean “TARE” function is active. Max. Weight
capacity is reduced by total weight of all loads.
2. Volume indication mode
A. Place the scale on a solid and flat
surface.
B. Press "ON/OFF" to turn on the
scale.
C. Wait until LCD shows "0", and
press MODE button to choose
"Water" or "Milk" mode.
D. Put a liquid container onto the
scale platform.
E. Press ZERO button to reset LCD
to "0".
F. Pour liquid (water or milk) into the
container, LCD shows the volume
of the liquid.
G. Press MODE button to choose
"Weight" mode and view the weight
of liquid.

13 14
CLEANING AND CARE
1. Clean the scale with a slightly damp cloth. DO NOT immerse the scale
in water or use chemical/abrasive cleaning agents.
2. All plastic parts should be cleaned immediately after contact with fats,
spices, vinegar and strongly flavored/colored foods. Avoid contact with
acids citrus juices.
3. Always use the scale on a hard, flat surface. DO NOT use on carpet.
1.
2.
Note:when display shows "0" ,press "ON/OFF" to
turn off the scale;
when display shows weight reading, press
"ON/OFF" for 3 seconds to turn off the scale.
WARNING INDICATORS
1. Replace new battery.
2. Scale overload. Remove item to avoid
damage.Max.weight capacity is
indicated on the scale.
MANUAL SHUT OFF
To maximize battery life, always press
ON/OFF again to turn off the scale
after using.
g
Auto shut-off occurs if display shows
'0' or shows the same weight reading
for 2 minutes.
AUTO SHUT OFF
This marking indicates that this product should not be disposed with other
household wastes throughout the EU.
To prevent possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the sustain-
able reuse of material resources.
To return your used device, please use the return and collection systems or
contact the retailer where the product was purchased.
They can take this product for environmental safe recycling.
CONTINENTAL EDISON
120-126 Quai de Bacalan
CS11584
33000 Bordeaux
IMPORTE PAR :
A.M.C.
123 Quai Jules Guesde
94400 VITRY SUR SEINE
France
LOT #: amc052019