Contrive avior User manual

QUICK START GUIDE
CONFIGURATION
Q2900EN/1120
IoT • REMOTE CONTROLIoT • REMOTE CONTROL
avior
From the toolbar, access the windowAvior.Suite CONFIGURATION
Let's start setting some essential parameters by selecting the first item from
the list on the left enter a name that identifies your application, in the
example we will call our device
Click to confirm and save the change.
.
DEVICE
PumpStation
.
Now select the third item in the list for the settings relating to the
cellular network of the SIM used: number in international format and
(this information is provided by the telephone operator) if required, also
enter and ).
Click to confirm and save the change.
PLMN
PHONE
APN
USER NAME PASSWORD
.
Download the configuration software
Avior.Suite is a portable program.
No installation is required: extract the files to any local or
remote location and run theAvior.Suite program.
https://www.contrive.mobi/E/aviorsuite.php
To explore all the features of
Avior.Suite
in addition to this video in the Avior
channel you will find other videos
illustrating the device and its use.
https://youtu.be/GXu_UL7edw4
Pour toute assistance sur ce produit, vous pouvez
contacter notre Help Desk à l'adresse:
précisez où vous avez acheté le produit et décrivez votre
problème de manière claire et concise..
https://www.contrive.it/support/
If you have a 2G or 4G device insert a
SIM card in the Avior base following the
instructions in the user manual ...
... and connect an antenna to the SMA
connector without over tightening.
The antenna can also be screwed
directly to the connector, make sure it
has the characteristics required for the
technology in use (2G / 4G).
Here's what you'll need:
1Avior device
1 Mobi.Link USB cable
1 SIM card
1 Personal Computer with USB port
1 Power supply unit (maybe)
¡
¡
¡
¡
¡
ConnectAvior to your PC using the adapter cable
The device is powered directly from the USB port,
but if your computer is not able to supply sufficient
current you will also need to connect the external
power supply.
2505.00.03 Mobi.Link USB
Click on the USB icon to manageAvior directly connected to the PC.
Select the COM port the device is connected to and enter the password
(factory default ).
Click o confirm and open the connection.
0000
t.
When you have set up either Wifi or the mobile APN details
you will be able to configure and monitor your Avior remotely
Si la carte SD est installée dans l'appareil, vous avez également
la possibilité de le configurer via un serveur Web embarqué
The default password to access the device is , if you decide to change it,
write it down for any future access.
.
Click to confirm and save the change.
You may have noticed that after the title there is a code, it is a unique identifier
assigned to the device: . Write it down, later you will see how to access
the cloud management portal.
Now select the second item in the list and enter the name and
. After logging in, you will be able to see the
0000
WIFI
LOCAL IP
WebID
SSID
PASSWORD
.
2
1
USB software drivers should install silently, if not you can download it here:
https://www.ftdichip.com/Drivers/VCP.htm

If your Avior is connected to the internet via a WiFi or cellular
Enter WebID and password that we saw at point 2.
If you don't remember WebID, you can request it by
sending an SMS message toAvior:
If you have changed the preset password,
replace 0000 with the one you defined.
You may have guessed that D13 is the tag that identifies WebID and with
this SMS you are asking to read this position in the device MAP.
If everything is correct and you have sufficient credit, you will receive an
SMS in response containing the required identification.
From the cloud portal you will be able to see the status of your device and
change the configuration as you did with Avior.Suite.
Remember that the status refers to the time of the last connection and that
the changes will be waiting to be sent as soon as the device connects to the
network.
connection, you can access the cloud management portal.
https:// . .mobiavior webadmin
0000 at#rm=D13
3
5
4
6
Avior recognizes a user by his identifier, which can be a telephone number, an
email address or a numeric code.
In defining the rules you can distinguish an unknown user from a registered
user and for the latter, distinguish between an active or inactive user (i.e.
outside its validity period).
We now insert a user specifying the and selecting the in this
case . As we will enter the telephone number in
international format.
You can also assign this user to a .
.
Define the activation and end date and the days of the week on which it will be
enabled. You may also want to enter a maximum number of
(operations he can perform) which will be scaled for each use
At the bottom of each window you will find detailed explanations of the
possible settings. You can also watch some videos in the Avior channel.
Click to confirm and save the change.
NAME TYPE
TELEPHONE IDENTIFIER
GROUP
STICKET
.
The rules are the basis of howAvior works.
Let's start by assigning a to the rule, in the example
We then define which event will activate this rule, in the example we have
, so any change in the condition of this input will lead to the
execution of the rule.
Now we can specify the conditions for the execution of the rule, for example
when the status of the (i.e. active).
We can indicate additional conditions (up to 5), then we insert the check that
the .
You may have noticed that the first operand can be chosen from a list while for
the second operand you can choose from a list or enter a value.
The relationship between two operand (operator) can be chosen from a list.
Let's now move on to set one or more actions (up to 5), in the example the
activation of output 1, the sending of an SMS and an email.
Click to confirm and save the change.
NOME PumpON.
Digital input 1
Digital input 1 = 1
Average measure Analog input 1 < 30
.
From the toolbar, access the windowAvior.Suite USERSFrom the toolbar, access windowAvior.Suite RULES
As we have already seen at point 3, we insert a that
we will call choosing the activation event
specifying in the conditions
(exactly and only the word ) or use the
operator instead of to accept within a sentence.
As a first action we will activate output 1 and then send an SMS with the text
but instead of directly entering the recipient's phone
number we will use the tag.
All Avior parameters, whether they are settings, names or
values, are associated with an identification tag that you
can use in the composition of the rules by reporting it
preceded by the symbol. N23 corresponds to the last
SMS sender. Here you can find the list of all tags:
RULE
StartPump
SMS from user
Last received SMS text = start start
start
The pump has started
$N23
$
https://www.contrive.mobi/avior/ /MAP.html
=
en
Therefore, when digital input 1 changes state becoming active AND the
average value measured by analog input 2 is less than 30 (it could be a
temperature sensor), Avior will activate output 1, send an SMS and an email
to specified recipients with the specified content.
At the bottom of each window you will find detailed explanations of the
possible settings. You can also watch some videos in the Avior channel.
U