convenience concepts 131556 User manual

ASSEMBLY INSTRUCTIONS
We have designed our furniture with you , the customer in mind . Our clear , easy to follow ,
step by step instructions will guide you through the project from start to finish .
Feel confident that this will be a fun and rewarding project . The final product will be a quality
piece of furniture that will go together smoothly and give years of enjoyment .
Please do not return to the store
STOP
END TABLE

Panel List
Hardware List
Page 2 of 4
A B
C D E
12
43
Cambolt
Top panel （1PC）Side panel （2PCS）
Back panel (1PC）Front panel 1PC）
）
( 2pcs ) ( 2pcs )Camlock
( 8pcs ) ( 8pcs )
Front panel hole
Back panel hole
locking nut
Screw and washer
( 2pcs ) sticker
Assembling the unit with camlocks and wood dowels.
Gently screw cam
bolt into the
threaded anchor.
Screw the camlock
firmly into locked
position.
Lightly glue one end of
the wood dowel and tap
halfway into hole.
Lightly glue wood dowel and
connect to second panel by
inserting dowels into holes.
Arrow must face hole
C

Page 3 of 4
Hardware List
1
2
2
3
4

Page 4 of 4
Step 1
Step 2
A
A
A
C
C
C
C
CD
D
D
D
X 4
X 4
B
B
B
X 2
X 2
Step 3
C
C
C
C
D
D
D
X 4
X 4
D
1. Insert locking nuts into top panel .
1. Screw cambolts into front panel . Then
connect back panel using camlocks .
1
D
1. Insert locking nuts to front panel and back panel ..
2. Connect front panel and back panel to unit as shown.
using screws and washers(C).
2. Connect the side panels to top panel
using screws and washers .
2
3
3
4
4
4
4
2
1
Holes in the bottom
of the panel
This surface upward
Front panel hole
Back panel hole
E
X 2
E
3. Place stickers over camlock holes.
4.Enjoy.
3
*Refer to pace 2 for camlock/ cambolt instructions.
43