convenience concepts MISSION 09010 User manual

STYLE NO. 09 0102 MISSION OAK
09 0102W MISSION WHITE
CODE NAME FIGURE Q'TY CODE NAME FIGURE Q'TY
[email protected]
. Broken or Missing Parts?
. Need help with Assembly?
BACK PANEL
Please do not return to the store
2PCS
12PCS
c 1PC
1PC
BOTTOM
SUPPORT RAIL
1PC
TOP SUPPORT
RAIL
1PC
If you have any questions just call 1-800-468-6447 or email us at
KNOB BOLT
FRONT PANEL
KNOB DESK TOP
C
E
F
A
BRIGHT SIDE
PANEL
1PC
1PC
1PC
LEFT SIDE
PANEL
D
HFLIP DOWN
FRONT PANEL
MISSION DESK
GKEYBOARD
TRAY 1PC
PARTS LISTHARDWARE LIST
a
g
WOOD DOWEL
b
WOOD SCREW
(1/2"L)
d
f
e
CAM LOCK
12PCS
GLUE 1PC
CAM BOLT 10PCS
2PCS
10PCS

Fasten Side Panel ( A ) to unit assembly, gently tighten cam locks .
Gently tighten cam locks (C).
Repeat process for Top Support Rail ( C ) and Bottom Support Rail ( D ).
Connect Flip Down Front Panel ( H ) to Side Panel ( B ).
STEP 1
Insert Cam Bolts ( b ) into Side Panels ( A ) & ( B ). b. 6 PCS
STEP 2
Install Wood Dowels ( a ) as shown below. a. 8 PCS
c. 6 PCS
g. 1 PC
HARDWARE NEEDED
HARDWARE NEEDED
a
c
**** Assembling the unit with cam and wood dowels.
A
B
Gently screw cam
dowel into the
threaded anchor.
Lightly glue one end of the
wood dowel and tap halfway
into hole. Add 2nd drop of
glue to top of dowel.
Connect to second panel
by inserting dowels into
holes.
Insert cam lock with
arrow pointing down.
Screw the cam firmly
into locked position.
C
D

Insert Wood Dowels into assembly (a) as shown below.
Place Desk Top ( F ) onto unit assembly and gently tighten cam locks ( c ).
STEP 3
Insert Cam Bolts ( b ) into Desk Top ( F ). b. 4 PCS
STEP 4
a. 4 PCS
c. 4 PCS
g. 1 PC
HARDWARE NEEDED
HARDWARE NEEDED
**** Assembling the unit with cam and wood dowels.
A
B
Gently screw cam
dowel into the
threaded anchor.
Lightly glue one end of the
wood dowel and tap halfway
into hole. Add 2nd drop of
glue to top of dowel.
Connect to second panel
by inserting dowels into
holes.
Insert cam lock with
arrow pointing down.
Screw the cam firmly
into locked position.
C
D

STEP 5
Install Back Panel ( E ) to Back of Desk with Wood Screws ( d ). d. 12 PCS
STEP 6
Install Front Panel Knobs ( f ) to Flip Down Front Panel ( H ) using the KnobBolts ( e ). e. 2 PCS
f. 2 PCS
HARDWARE NEEDED
HARDWARE NEEDED

STEP 7
Carefully slide Key Board Tray ( G ) into Desk and Enjoy!