convenience concepts Omega 203210W User manual

Omega End Table
Assembly Instructions
We have designed our furniture with you,the customer in mind.Our clear,easy to follow
step by step instructions will guide you through the project from start to finish.
Feel confident that this will be a fun and rewarding project. The final product will be a quality piece of
furniture that will go together smoothly and give years of enjoyment.
Please do not return to the store
Broken or missing Hardware?
Need help with Assembly?
If you have any questions just call 1-800-468-6447 or email us at
[email protected]
CONVENIENCE
CONCEPTS
203210W/203210BL

12 x (A) 12 x (B) 12 x (C) 8 x (D) 12 x (E) 8 x (F)
1
To p p an e l
Top Support
6
Top Support
6
2
Middle Panel
Bottom Panel
3
4
Righ t Panel
5
Bottom Support 7
Bottom Support 7
Wood Dowel Bolt Lock Nut Cam Bolt Stickers Cam Lock
*Special Note：We recommend the use of a hand screwdriver to avoid the stripping of screw heads.*
Assembling the unit with cams.
Gently screw cam
bolt into the
threaded anchor.
Insert cam lock with
arrow pointing down.
Screw the cam firmly
into locked position.
Page 2 of 5
Left Panel

Step 1
4 X (D)
Step 2
4 X
(D)
Step 3
12 X
(A)
NOTE:
Assemble console on carpet or other
soft surface to avoid scratching.
(A)
(A)
(A)
4 X (F)
(D)
(D)
(D)
(D)
(F)
(F)
(F)
(F)
(F)
(D)
(D)
(D)
(D)
(D)
(F)
(F)
(F)
(F)
(F)
(D)
4 X (F)
6
6
1.Screw Cam Bolts (D) into Top Panel .
2.Insert Cam Locks (F) into Top Support Bars .
3.Connect Top Support Bars to Top Panel
by gently tightening Cam Locks (F).
1
1
6
6
1
7
7
3
1.Screw Cam Bolts (D) into Bottom Panel .
2.Insert Cam Locks (F) into bottom Support Bars .
3.Connect Bottom Support Bars to Bottom Panel by gently tightening
Cam Locks (F).
3
7
7
3
4
5
(A)
(A)
(A)
(A)
(A)
(A)
(A)
(A)
(A)
1.Insert Wood Dowels (A) into Left Panel
and Right Panel .
4
5
Page 3 of 5

Step 4
6 X
(B)
(C)
Step 5
6 X
(B)
(C)
(C)
(B)
(B)
(C)
(B)
(B)
(C)
(C)
(C)
(C)
(B)
(B)
(B)
(C)
(C)
(C)
(C)
(C)
4
(B)
(B)
(B)
(B)
(B)
6
6
1
(C)
2
3
7
7
1.Carefully connect Left Panel to Top ,middle ,and bottom
panels using Bolts (B) and Lock Nuts (C).
4123
(B)
(B)
(C)
(C)
6
6
5
1
2
3
7
7
1.Repeat Step 4 using Right Panel .
5
6 X
6 X
Page 4 of 5

Step 6
12 X (E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)
1.If desired,place Stickers (E) over screw holes.
2.Enjoy.
Page 5 of 5