convenience concepts Tribeca TV Stand 151311CH User manual

151311MC
151311CH 151311
ASSEMBLY INSTRUCTIONS
We have designed our furniture with you , the customer in mind . Our clear , easy to follow ,
step by step instructions will guide you through the project from start to finish .
Feel confident that this will be a fun and rewarding project . The final product will be a quality
piece of furniture that will go together smoothly and give years of enjoyment .
Please do not return to the store
. Broken or missing parts?
. Need help with assembly?
If you have any questions just call 1-800-468-6447 or email us at
[email protected]
STOP
Tribeca TV Stand
HOLDS UP TO 60” TV
MAXIMUM WEIGHT: 100 lbs

Cambolt & Camlock(32pcs)
Drawer Cambolt & Camlock
(12pcs)
Long Screw (12pcs)
Handle Screw(6pcs)
Cap (8pcs)
Handle (3pcs)
(22pcs)
A
B
C
D
E
F
G
H
I
8
(1)
large Divider Panel(2pcs)
Bottom Panel(1pc)
Middle Panel(1pc)
Top Panel(1pc)
Side Panel(2pcs)
Left(7) Right(8)
Drawer Bottom Panel(3pcs)
Foot Panel(1pc)
Drawer Front Panel(3pcs)
Drawer Back Panel(3pcs)
Back Panel(1pc)
Drawer Side Panel(6pcs)
Left(10) Right(11)
Small Divider Panel(2pcs)
(2)
(3)
(5)
(8)
(10) (11)
(12)
(13)
(9)
(7)
(6)
(4)
Gently screw the cam
clockwise into locked
position.
Do not overtighten.
Lightly glue dowel
and connect to second
panel by inserting
dowels into holes
Lightly glue one end
of woode dowel and
tap into hole.
Gently screw cam
dowel into the
threaded anchor
Insert camlock and
camlock must face
bolt hole
( 14pcs )
Medium Screw
(14)

Drawers
1
2
2
3
4
4
5
6
7
8
14
9
10
11
12
13
FRONT
FRONT
PAGE OF 8
3
Exploded Views

step1
step2
1
1
B
A
A
FRONT
FRONT
FRONT
(Top view)
(Bottom view)
2
B
A
PAGE OF 8
cambolts and
camlocks(A)and wooden
dowels(B) to Bottom
Panel(1)as shown.
4
*Refer to page 2 for dowel assembly
1.Insert camlocks (A)and wooden
dowels(B) to Large Divider Panels(2)
as shown.
2.Connect both large Divider Panels(2)
to Bottom Panel(1) and gently
tighten camlocks.
Insert

step5
step4
step3
Attach cambolts and camlocks(A) to
Middle Panel(3).
A
A
A
3
3
3
A
4
4
FRONT
FRONT
(Bottom View)
(Top View)
1.Place Middle Panel(3) onto assembly
and gently tighten camlocks.
2.Attach Cambolts(A) to Middle
Panel(3).
1. Camlocks (A) to Small Divider
Panels(4).
2.Connect both Small Divider
Panels(4) to the Middle Panel(3).
3.Gently tighten camlocks.
Camlock side faces inside
PAGE 5 OF 8
Insert

step7
step8
1
5
5
3
1
6
4
4
3
step6
5
A
G
A
PAGE 6 OF 8
1.Connect Top Panel(5) to
Small Divider Panels(4).
2.Gently tighten camlocks.
3.Attach caps(G) to camlock
holes in panel(4).
1.Using two people,turn
unit upside down carefully.
2 Attach Cambolts(A) to
Bottom Panel(1) and
Camlocks(A) to Foot
Panel(6).
3 Connect Foot Panel(6) to
Bottom Panel(1).
Gently tighten camlocks.
Cambolts and Camlocks(A)
to Top Panel(5).
(Bottom View)
(Top View)
FRONT
FRONT
FRONT
FRONT
Insert

step10
step9
1.Attach cambolts(A) and insert wooden dowels(B)to side
panel(7)and(8).
7
7
7
8
1
8
AB
FRONT
FRONT
FRONT
PAGE 7 OF 8
1.Connect the Side panels(7)and(8)
to the assembly.(Make sure all the
Camlocks face bolt holes before
assemble and all Slide Rails
should on the same level.)
2.Gently tighten
camlocks.
3.Turn unit over
carefully.
* Be sure that curved ends of side panels face top of unit when assembled.
(remember diagram is upside-down)

11
11
10
10
13
C
9
E
F
D
12
LEFT
13
RIGHT
D
PAGE 8 OF 8
step11
step12
1.Fasten drawer side
panels(10) and (11) to
drawer back panel(13)
using long screws(C)
as shown.
2. Insert drawer camlocks(D)
to drawers side panels(10) and (11).
1.Slide Drawer Bottom
Panel(12) into slots in
Side Panel(10)and(11).
2.Attach Drawer
Cambolts(D) and Handle(E)
to the Drawer Front
Panel(9).
3.Attach Drawer Front
Panel(9)to assembly,
Making sure Bottom Panel
slides into slot and
gently tighten camlocks.

step13
1.Carefully slide Drawers
into unit and enjoy your
quality piece of
furniture.
PAGE 8 OF 8
step14
1.Connect the back panel (14) to the assembly as shown
using medium screws (I).
14
I