convenience concepts CARLY 111107GY User manual

ASSEMBLY INSTRUCTIONS
We have designed our furniture with you , the customer in mind . Our clear , easy to follow ,
step by step instructions will guide you through the project from start to finish .
Feel confident that this will be a fun and rewarding project . The final product will be a quality
piece of furniture that will go together smoothly and give years of enjoyment .
Please do not return to the store
Broken or missing parts?
Need help with assembly?
If you have any questions just call 1-800-468-6447 or email us at
[email protected]
STOP
111107GY 111107W
CARLY DESK GRAY/WHITE

Panel List
Hardware List
Page 2 of 6
AB C D
E GF H
Screw ( 1pcs ) Allen wrench ( 1pc)Blot ( 28pcs )
Plasc anchor
(1pc)
Mounng screw
(1pc) Washer (2pc) Safety wall strap (1pc)
Plasc foot (4pcs)
Small panel (1pc)
Side frame (2pcs)
Back support (1pc)
Big panel (1pc) Top support (2pcs)
* Special note : we recommend the use of a hand held screw driver to avoid the stripping of screw heads.*

Page 3 of 6
Exploded Views

Page 4 of 6
Step 1
Step 2
X 8
X 4
X 1
D
B
A
AA
AA
AA
B
B
B
B
A
A
A
A
1. Connect side frames to big panel using bolts (A)
and allen wrench (D) .
1. Connect back support to assembly as shown
using bolts (A) and allen wrench (D) .
2
2.Aach plasc feet (B) to side frames .
* Place big panel upside down on carpet or other so surface .*
2
X 4
X 1
D
A

1. Connect top supports to small panel using bolts (A)
and allen wrench (D) .
AAA
AA
Page 5 of 6
Step 3
Step 4
X 8
X 1
D
A
1. Connect small panel assembly to unit as shown
using bolts (A) and allen wrench (D) .
1
3
X 8
X 1
D
A
A
A
A
A

Page 6 of 6
Step 5
E
C
H
E
G
G
G
F
F
H
H
I
Wall
1.Connect the safety wall strap (H) to unit using wood screw (C) and washer (G).
2.Drill hole slightly smaller than plasc anchor (E) into drywall
and gently tap plasc anchor into hole.
3.Connect safety wall strap (H)
to plasc anchor (E) as shown
using mounng screw (F) and washer (G)
.