convenience concepts Designs2go Landon 203145BL User manual

Assembly instructions
We have designed our furniture with you,the customer in mind.Our clear,easy to follow
step by step instructions will guide you through the project from start to finish.
Feel confident that this will be a fun and rewarding project. The final product will be a quality piece of
furniture that will go together smoothly and give years of enjoyment.
STOP
End Table
Please do not return to the store
Broken or missing Hardware?
Need help with Assembly?
If you have any questions just call or email us

1 x1 2 x1 3 x1 4 x1 5 x1
6 x1 7 x2 8 x1 9 x1 10 x1 12 x1
11 x1
13 x2 14 x2
x12A B x12 x4E x4F
C x8 D x6 x2G x
4
H
x1I x1J x8K x2L x6M x2N x1O
Assembling the unit with cams and wood dowels.
Gently screw cam
bolt into the
threaded anchor.
Insert cam lock with
arrow pointing Toward.
Screw the cam lock gently
into locked position.
hole
Page 2 of 4

C
C
C
C
A
A
A
AB
B
B
B
1
2
3
4
4
3
5
Step 1
Step 2 Step 3
K
K
K
KK
K
K
K
E
E
E
E
F
F
F
F
G
G
6
7
7
13
14
14
13
L
13
14
L
Note: Barrel nut (F) threads must face holes.
1Loosely connect legs 13 to 14
Attach leg assemblies to support bar 6 using and screws(G).
Attach support bars 7 to assembly using bolts (E）and Barrel nuts（F).
2
3.
1.Attach side rails(I) and (J) to panels 3 and 4 ,respectively,using screws(M) with rollers on
opposite end of slots.
2. Attach panels 3 and 4 to panel(1) using Dowels(K),cam locks(B) and cam bolts(A),as shown.
3. Slide back panel 5 into slots of panel 1 , 3 and 4 .
4. Attach panel 2 to assembly, making sure panel 5 slides into slot of panel 2 , using dowels(K) and
screws(C).
dowels (L )
Page 3 of 4

1 Attach panels 9 and 10 to panel 1 1 with
screws (C) as shown.
2 Slide bottom panel 12 into slots
A
A
A
A
B
B
B
B
C
C
C
C
2
8
9
10
11
11
12 N
N
O
B
B
B
B
A
A
A
A
Step 4 Step 5
Step 6
Attach leg assembly to panel using Cam bolts (A)
and Cam locks (B),as shown. of panels 9,
and 11
10
3.Attach handle (O) to drawer front using small
4. Attach drawer front to drawer assembly using cam
Make sure that slot on back side of 8
before attaching handle(O).
and Cam Locks(B),as shown.bolts (A)
1.Place stickers(D) over bolt holes as shown.
2.Carefully slide drawer into unit
3.Enjoy
2
8
H
H
H
H
bolts(N).
1.
2.Attach pads(H)to bottom of legs 13 and 14
is at bottom
Page 4 of 4