convenience concepts 134077 User manual

ASSEMBLY INSTRUCTIONS
We have designed our furniture with you , the customer in mind . Our clear , easy to follow ,
step by step instructions will guide you through the project from start to finish .
Feel confident that this will be a fun and rewarding project . The final product will be a quality
piece of furniture that will go together smoothly and give years of enjoyment .
Please do not return to the store
Broken or missing parts?
Need help with assembly?
If you have any questions just call 1-800-468-6447 or email us at
[email protected]
STOP
134077
Royal Crest Entryway Table

Step1 Step2
Step3
Boom frame (1pc)
Top frame (2pcs)
Glass panel (3pcs) Ball end (4pcs) Non-slip disk (12pcs) Polishing cloth (1pc)
Short pole (4pcs) Long pole (4pcs) Short screw
foot (1pc)
Foot (4pcs)
2.Place boom frame onto feet & .
3.Screw long poles into feet .
1.Make sure all bolts in feet & and long poles
are fully screwed in.(As shown in blowup ).
1.Place second frame onto unit and
screw short poles into long poles
as show.
1.Place final frame onto unit and screw
ball ends into short poles .
1
8
2 3 4 7
5 6
A B
E
D
C
Cable e ( 2 pcs ) Eyelet screw (2 pcs ) Anchor ( 2 pcs )
3
3
3
8
1
6
6
2
1
2
8
4
4
4
4
1
1
2
2
3
3
Page 2 of 3
7
7
7
Feet length can
be adjusted.

Step5
Step4
Step6
EDC
1.Drill holes slightly smaller than anchors into
drywall and gently tap anchors into holes.
2.Insert eyelet screws into anchors and fasten
unit to wall using cable es .
E
C
D
Place non-slip disks (A) into assembly as shown to support glass shelf.
1.Reghten all poles,feet and ball ends .
2.Using a slight angle carefully insert glass
panels into unit.
A
5
5
Page 3 of 3