convenience concepts 151056 User manual

We have designed our furniture with you , the customer in mind . Our clear , easy to follow ,
step by step instructions will guide you through the project from start to finish .
Feel confident that this will be a fun and rewarding project . The final product will be a quality
piece of furniture that will go together smoothly and give years of enjoyment .
Please do not return to the store
Broken or missing parts?
Need help with assembly?
If you have any questions just call 1-800-468-6447 or email us at
[email protected]
STOP
ASSEMBLY INSTRUCTIONS
151056
ith

Hardware List
Page 2 of 6
Exploded Views
Plasc Anchor X 2
(M)
Cable Tie X 2
Eyelet Screw X 2
Long
Middle panel
Short

Step 1
Step 2
Page 3 of 6
(1) Place Bottom Panel (B) with groove side
up over Plastic Feet (J).
(1) Gently screw Long Poles (C) into unit using care not over tighten.

Step 3
Step 4
Page 4 of 6
E
E
F
(1) Slide Side Walls (E) and Back Wall (F) into grooves
of Bottom Board (B).
G
(1) Place Middle Panel (G) with groove side down and magnet facing front,
on top of unit .
(2) Align Side Walls (E) and Back Wall (F) with groove on underside of Middle
Board (G).

Step 5
Step 6
Page 5 of 6
H
D
(1) Screw Short Poles (H) loosely into unit (one turn clockwise) allowing room to
adjust doors and walls if necessary.
(2) Carefully place Glass Doors (D) ( Metal Tab up) into designated holes on Middle
and Bottom Boards.
(3) Check alignment of walls and doors, keeping light pressure on
(4) Gently tighten poles.
(1) Place Top Board (I) onto unit.
(2) Screw End Caps (A) into unit.
Middle Panel (G).

Step 7
Page 6 of 6
1.Drill holes slightly smaller than anchors（M) into drywall and gently tap anchors into
holes.
2.Screw eyelet screws (L) into anchors and fasten unit to wall using cable ties (K).
K
L
/
WALL STUD
C
WALL
M