Ethnicraft OAK GEOMETRIC DINING TABLE User manual

IN YOU PACKAGE :R
ASSEMBLY INSTRUCTIONS
HARDWARE (AS LISTED ABOVE)
PARTS TO BE INSTALLED
1. pcTABLE TOP 1
2. pcLEGS 2 s
3. APRONS 2pcs
SYMBOLS
DIRECTION NUMBER OF
PERSONS NEEDED
USE HAND USE L KEY
TO TIGHTEN
HARDWARE ENCLOSED TOOLS
X2
METAL PLATE
4pcs
SCREW
M8x16mm
16pcs
SCREW
M8x50mm
8pcs L KEY 4
(Included in package)
NOTICE
OAK GEOMETRIC DINING TABLE
ASSEMBLY INSTRUCTION FOR INSTALLATIONS DINING TABLE
SCREW
M6x60mm
4pcs
SCREW
M6x50mm
10pcs SCREWDRIVER
(Not included in package)
L KEY 5
(Included in package)
2
2
1
3
3
USE SCREWDRIVER
TO TIGHTEN
1/4

B LEG TO TABLE TOP. INSTALLING
A METAL PLATE TO THE LEGS. INSTALLING
- USE SCREW M8x16mm (8X)
- USE L KEY 5 TO TIGHTEN
- DO NOT FULLY TIGHTEN
23
- USE METAL PLATE (4X)
- USE SCREW M8x50mm (8X)
- USE L KEY 5 TO TIGHTEN
- TIGHTEN FULLY ALL SCREWS
1
WITH SCREWDRIVER TO FIT SCREW
INTO THE BARREL NUT
THE GROOVE OF THE LEGS
MUST BE FACING INWARD
2
2
1
1 2
3
OAK GEOMETRIC DINING TABLE
ASSEMBLY INSTRUCTION FOR INSTALLATIONS DINING TABLE
2/4

C APRON TO THE LEG. INSTALLING
STEP 1
- APRON HOLES FACING INWARD
STEP 2
- USE SCREW M6x60mm (2X)
- WITH SCREWDRIVER TO FIT SCREW
INTO THE BARREL NUT
- USE L KEY 4 TO TIGHTEN
- DO NOT FULLY TIGHTEN
1 2
3
1
2
1 2
3
STEP 1
- THE APRON IS SLIGHTLY LIFTED
- PUSH THE LEG
STEP 2
- USE SCREW M6x60mm (2X)
- WITH SCREWDRIVER TO FIT SCREW
INTO THE BARREL NUT
- USE L KEY 4 TO TIGHTEN
- DO NOT FULLY TIGHTEN
STEP 3
- USE SCREW M8x16mm (8X)
- USE L KEY 5 TO TIGHTEN
- DO NOT FULLY TIGHTEN
4
3
3
D INSTALLING THE LEG.
2
OAK GEOMETRIC DINING TABLE
ASSEMBLY INSTRUCTION FOR INSTALLATIONS DINING TABLE
3/4

D RE-TIGHTEN ALL SCREWS.
C FIX THE APRON TO THE TABLE TOP.
- USE SCREW M6x50mm (10X)
- USE L KEY 4 TO TIGHTEN
- TIGHTEN FULLY
1
2
USE L KEY 4 TO TIGHTEN FULLY
USE L KEY 5 TO TIGHTEN FULLY
OAK GEOMETRIC DINING TABLE
ASSEMBLY INSTRUCTION FOR INSTALLATIONS DINING TABLE
4/4