convenience concepts Oxford 203295 User manual

Oxford 1 Drawer Console Table
203295
CONVENIENCE
CONCEPTS
We have designed our furniture with you, the customer in mind. Our clear, easy to follow step
by step instructions will guide you through the project from start to finish. Feel confident that
this will be a fun and rewarding project. The final product will be a quality piece of furniture
that will together smoothly and give years of enjoyment.
Please do not return to the store
Broken or missing Hardware? Need help
with Assembly?
Our Illinois based customer service team is ready to help with any problems or
questions you may have. Please give us a call (Toll Free)
at 1800-468-6447, or email us at [email protected].
Normal hours of Operation: M - F* 8 am - 4 pm CST
* Excludes Holidays.
This product’s warranty is only valid through authorized dealers.
Assembly instructions
Page 1 of 5

Top Panel
Back Support Bar
Right Side Panel
Support Bar
Shelf
Shelf
Right Drawer Side Panel
Drawer Back Panel
Drawer Support Bar
Drawer Front
A 17pcs B 17pcs C 4pcs D 13pcs E 4pcs F 1pc G 1pc H 2pcs I 2pcs
J 4pcs K 2pcs L 8pcs M 8pcs N 2pcs O 2pcs
Cam Bolt Cam Lock Wooden Dowel Screw Small Screw Right Glider
Wooden Dowel Bolt Lock Nut Handle Small Screw
Anchor
Assembling the unit with cams .
A
Gently screw cam
bolt into the
threaded anchor.
Insert cam lock with
arrow pointing down.
Screw the cam firmly
into locked position.
D
Page 2 of 5
P 8pcs
3*12
3*15
Skinny Handle Screw
Q1pc
Allen

Step 1
E×4
F×1
G×1
D×6
A×4
B×4
C×2
L×4
M×4
Step 2
Step 3
Page 3 of 5
1. Screw cambolts (A) into le side panel 1 .
2. Connect back support bar 4 and support bar 6 to le side panel 1 using cambolts (A) and camlocks (B).
3. Connect shelves 7 and 8 using bolts (L) and locknuts (M) as shown.
Q×1
Q
Q
Q
Q
E
E
G
G
F
Cambolt holePart 4
Cambolthole
Part 6

Step 4
A×3
B×3
D×5
J×4
K×2
N×2
A×6
B×6
A×4
B×4
C×2
L×4
M×4
Step 5
Step 6
side panels 4 & 2 using camlocks (B).
Page 4 of 5
1. Screw cambolts (A) into top panel 3 .
3. Screw cambolts (A) and insert skinny wood dowels
4. Connect drawer front 14 to assembly by using camlocks (B).
11 using screws (D).
into drawer front 14 .
Q×1
Q
Cambolt
holePart 4
Cambolthole
Part 6
2. Connect right side panel 2 to unit using cambolts (A), camlocks (B),bolts (L) and lock nuts (M).
1. Screw cambolts (A) into left side panel 2 .
Underside of Part 3
Front
Cambolt
hole
Cambolt
hole
Cambolt
hole
Cambolt
hole
Cambolt
hole
Cambolt
hole
Cambolt hole
Back of Part
14
Back of Part 14
Dowel
hole
Knob
screw
11
11

Step 7
Step 8
D×2
H×2
I×2
O×2
P×8
& right panel 2 using small screw (O)
2. Place unit against wall and mark bracket holes.
3. Drill holes in wall slightly smaller than anchor (H)
4. Fasten unit to wall using screw (D) through
5. Enjoy.
Page 5 of 5
H
H
I
I
P
P
P
P
P
P
P
P
and gently tap anchors into holes.
brackets (I).
1. Carefully insert drawer into unit.