convenience concepts Belaire Console Table 132201 User manual

ASSEMBLY INSTRUCTIONS
We have designed our furniture with you,the customer in mind. Our clear, easy to follow,
step by step instructions will guide you through the project from start to finish.
feel confident that this will be a fun and rewarding project . The final product will be a quality
piece of furniture that will go together smoothly and give you years of enjoyment.
Please do not return to the store
Broken or missing parts?
Need help with assembly?
If you have any questions just call 1-800-468-6447 or email us at
[email protected]
STOP
Belaire Console Table
132201 132201GY

Assembly instrucons
Accessories list
1. Slide front and back frames and
into side frames . Connect frames
together using screws (A).
2. Carefully insert plasc foot (B) into
boom of corners.
*Note: Make sure screw holes in side
frames are facing as pictured*
1. Place table top upside down on carpet
or other so surface.
2. Aach frame assembly to table top
using screws (A).
3. Turn unit over.
Front frame (1pc)
Back frame (1pc) Side frame (2pcs)
A
4
Step 1
Step 2
Screw (22pcs) Plasc foot
(4pcs)
Polishing cloth
(1pc)
1 2 3
B
1
1
2
4
4
2
3
3
3
Page 2 of 3
Cable e
( 2 pcs )
Eyelet Screw
(2 pcs )
Anchor
( 2 pcs )
Table top (1pc)
4
DEF
*Special Note: We recommend the use of a hand held screwdriver to avoid the stripping of screw heads.*

Step 3
Assembly instrucons
Page 3 of 3
D
F
E
1. Place unit along wall in desired place.
2. As far up as you can go on frame mark holes on wall for anchors (F) for each side of unit.
3. Remove unit and drill holes in wall slighter smaller than anchors (F) then gently tap anchors
into holes.
4. Screw eyelet screws (E ) into anchors and secure unit with cable es (D).
5. Enjoy
*This step is oponal but recommended*