convenience concepts 8043387 User manual

8043387 CH
8043387 BL
Item No. 8043387
[email protected]
CC0047
If you have any questions just call 1-800-468-6447
Please do not return to
. Broken or Missing Parts?
. Need help with Assembly?
SIERRA HIGH BOY TV STAND
50" Maximum Flat Panel Television
100 lb. Maximum Capacity

CODE NAME FIGURE Q'TY CODE NAME FIGURE Q'TY
BOTTOM LEG 1PC
1PC
2PCS
1PC
1PC
1PCBACK PANEL
MIDDLE
CROSSBAR 1PC
BOTTOM PANEL 1PC
ADJUSTABLE
PANEL
P WOOD GLUE 1PC
2PCS
MIDDLE SIDE
PANEL
KDRAWER SCREWS
(Φ4*11mmL)
J
LARGE KNOB
SCREW
(Φ4*20mmL)
FRONT CROSSBAR
7PCS
DOOR HINGE
LEFT SIDE PANEL 1PC
M SHELF SUPPORT 8PCS
RIGHT SIDE PANEL
L HANDLE
1PC
6PCS
RIGHT SIDE DOOR
TOP PANEL 1PC
20PCS
LEFT SIDE PANEL
OF DRAWER 1PC
DCAM BOLT
(Φ6.5*35mmL) 16PCS
1PC
1PC
GLASS DOOR 2PCS
HARDWARE LIST PARTS LIST
ATHIN WOOD DOWEL
(Φ6X30mmL) 8PCS 1PC
N COLOR STICK 1PC
B 1PC
THICK WOOD
DOWEL
(Φ8X30mmL)
22PCS BACK PANEL OF
DRAWER
EWOOD SCREW
(Φ7X25mm)
FRONT PANEL OF
DRAWDR
BOTTOM PANEL
OF DRAWER
CCAM LOCK
(Φ15*9mmL) 16PCS
RIGHT SIDE PANEL
OF DRAWER
QALEN WRENCH 1PC
8PCS
2PCS
FMEDIUM SCREW
(Φ7*16mmL)
3PCS
H
24PCS
GSMALL SCREW
(Φ7*14mmL)
WIRE CAPO
I KNOB
1
2
3
4
5
6
7
12
8
9
10
11
13
14
15
16
17
4PCS

HARDWARE
NEEDED 1.) Insert Wood Dowels (A) into panels (1)&(2)
A x 4 and attach them to panel (4) using Wood Screws (E)
E x 4
1.) Slide panel (5) into drawer assembly.
HARDWARE
NEEDED
A x 4
E x 4
I x 1
J x 1
1.) Attach Panel (3) to drawer assembly using Wood Dowels (A)
and Wood Screws (E).
2.) Attach Knob (I) to drawer using Screw (J).
HARDWARE
NEEDED
F x 4 x 2
H x 2 x 2
1.)Attach Door Hinges (H) to Glass Doors (6) using Medium Screws (F)
Assembling the unit with cam and wood dowels.
STEP 1
STEP 2
EA
E
I
J
A
E
STEP 3
STEP 4
F
A
E
E
A
H
H
F
E
E
A
B
Gently screw cam
dowel into the
threaded anchor.
Lightly glue one end of the
wood dowel and tap halfway
into hole. Add 2nd drop of
glue to top of dowel.
Connect to second panel
by inserting dowels into
holes.
Insert cam lock with
arrow pointing down.
Screw the cam firmly
into locked position.
C
D
2
4
1
5
3
6

HARDWARE
NEEDED
F x 4
H x 2
1.)Attach Door Hinges (H) to Wood Door Panel (7)
using Medium Screws (F)
HARDWARE
NEEDED
B x 2
C x 2
D x 2
1.)Attach Left Side Panel (9) to Bottom Panel (14) using
Thick Wood Dowels (B), Cambolts (D) and Camlocks ( C ).
HARDWARE
NEEDED
B x 2
C x 2
D x 2
1.) Attach Middle Panel (10) to assembly using Thick Wood Dowels (B),
Cambolts ( D ) and Camlocks ( C ).
HARDWARE
NEEDED
B x 10
C x 6
D x 6
1.) Use Thick Wood Dowels ( B ), Cambolts ( D ) and Camlocks
( C ) to carefully attach Front Crossbar ( 12 ) to assembly.
2.) Repeat process to attach Middle Crossbar ( 13 ).
3.) Repeat process to attach Right Side Panel ( 11 ).
STEP 6
STEP 7
STEP 8
D
B
C
D
STEP 5
F
B
B
CD
F
H
H
C
C
B
11
D
B
D
D
B
B
C
C
C
C
C
7
9
14
10
12
13
17

HARDWARE
NEEDED
B x 8
C x 6
D x 6
1.) Attach Top Panel ( 8 ) to assembly using Wood Dowels ( B ),
Cambolts ( D ) and Camlocks ( C ) .
HARDWARE
NEEDED
O x 2
HARDWARE
NEEDED
G x 20
1.) Attach Back Panel ( 16 ) to assembly using Small Screws ( G )
as shown.
HARDWARE
NEEDED
F x 8
J x 4
L x 2
1.) Attach Glass Door ( 6 ) to assembly by screwing Door Hinges
( H ) to Middle Panel ( 10 ) with Medium Screws ( F ).
2.)Attach Handle ( L ) to Door ( 6 ) using Knob Screws ( J ).
3.) Repeat process for remaining door.
STEP 13
STEP 9
STEP 12
F
F
J
STEP 11
L
8
D
DBD
DB
D
D
B
C
C
B
B
G
G
G
GG
G
G
G
G
G
GG
G
GGG
G
G
G
G
16
6
10
O
O
STEP 10

HARDWARE
NEEDED
F x 4
I x 2
J x 2
1.) Attach Wood Door ( 7 ) to assembly by screwing Door
Hinges ( H ) to Right Side Panel ( 11 ) with Medium
Screws ( F ).
2.) Attach Knobs ( I ) to Wood Door ( 7 ) using Knob Screw ( J ).
HARDWARE
NEEDED
1.) Slide Drawer into sliderails as shown and secure with
Drawer Screws ( K ).
HARDWARE
NEEDED
M x 8
1.) Insert four (4) shelf supports (m) into lower set of holes at desired
height and diagonally place lower adjustable shelf (15) into possition.
2.) Insert two (2) shelf supports (m) into only the left side panel (9)
upper holes at desired height.
3.) Place left side of upper shelf (15) on top of shelf supports (m) and raise right
side slightly above desired hole placement.
4.) Insert remaining two (2) shelf supports (m) into holes and lower
the shelf into position.
Enjoy your new Sierra High Boy!
STEP 13
I
STEP 14
STEP 15
K
I
J
J
F
F
15
M
7
K x 4