CoolGear USB2-4COM-M-CBL User manual

[e-mail] www.CoolGear.com
USB2-4COM-M-CBL
USB2-4COM-M-CBL USB 2.0 to RS-232 FTDI Serial Adapter DB-9 Male User Manual
The USB2-4COM-M-CBL USB Serial Adapter is designed to make serial
port expansion quick and simple. Connecting to a USB port on your
computer or USB hub, the USB Serial Adapter instantly adds serial
communication port to your system. By taking advantage of the USB
bus, the USB Serial Adapter makes it easier than ever to add serial
port and serial device to your system with easy plug-and-play and hot
plug features. Adapting the new technology, the serial port expansion
now takes the new bus with easy and convenient connectivity.
Plugging the USB Serial Adapter to the USB port, the adapter is
automatically detected and installed. There are no IRQ & COM port
conflicts, since the port doesn't require any additional IRQ, DMA,
memory as resources on the system. The RS-232 port functions as
native Windows COM port, and it is compatible with Windows serial
communication applications. Each port is individually configurable.
The USB Serial Adapter provides instant connectivity to RS-232
communication device for factory automation equipment, multi-drop data collection devices,
barcode readers, time clocks, scales, data entry terminal and serial communication in harsh environment. The USB to
Serial Adapter is suitable for remote access, retail and industrial application, data collection and other applications
requiring high speed RS-232 communication ports.
Power Requirement
The USB2-4COM-M-CBL is powered by the host USB port of your computer; your computer must supply power of 5V /
500mA for self-power to work properly.
Specifications and Features
•Adds Four industrial RS-232 serial ports by connecting to a USB port
•Compact size box can be mounted to DIN rail conveniently
•Octopus cable fanning out to 4 DB9 serial ports
•Installed as standard Windows COM port
•SECC metal chassis with DIN rail bracket
•Hardware/software flow control
•RS-232 data signals: TxD, RxD, RTS, CTS, DSR, DTR, DCD, GND
•High speed serial port with the baud rate up to 921.6K bps
•128 byte transmit FIFO & 384 byte receive FIFO
•Non-standard baud rates supported
•LEDs of Power, TxD and RxD for easy port monitoring and diagnostics
•Serial port protected with surge protection of 10KV
•Powered by USB port, no external power adapter required
•Easy plug and play installation and RS-232 device connection
•COM port number assigned can be changed to any COM port number required
•Works with USB 1.1 & 2.0 host port
•Supports Windows 8, Windows 7, Vista, 2003, XP, 2000 and Linux

[e-mail] www.CoolGear.com
Windows 7/ Vista / 2003 / XP / 2000 Driver Installation
You need to have administrator privileges to install any new drivers under Windows 7/ Vista / 2003/ XP / 2000. To install
the driver or update the configuration please log onto Windows as "Administrator" or ask your system administrator to
install the USB-COM driver.
Note: You need to install driver first, prior to hardware installation. Do not connect the USB-to-Serial Adapter to the USB
port of your computer, before you finish driver installation.
Please proceed with the following steps to install the driver:
1. Insert the “USB COM Series Driver and Utility” CD into your CD-ROM.
2. The “USB COM Series Driver and Utility CD” dialog box appears.
3. Under “Driver Installation”, double click “Windows 7, Vista, 2003, XP, 2000 driver” to install the device driver.
4. The USB COM install program will auto-detect the OS type and install the driver automatically. (Note: in
Windows 7 or Vista OS you will find another dialog box, please click on “OK” to confirm the drivers install
program).
5. After the message “FTDI CDM Driver installation process completed” appears, press “Enter” to complete the
driver installation.
6. Plug in the USB to Serial Adapter to the USB port of your computer. Windows will finish installing the driver files.
Check Installation
You can now verify the installation has been completed successfully by looking under Device Manager of the System
Properties screen. (Go there by Start-Setting- Control Panel-System Properties-Hardware-Device Manager.
The device should have installed as a "USB Serial Port (COMx)" attached to "USB Serial Converter (A/B or A/B/C/D)".
Change COM Port Properties & COM Port Number
This feature is particularly useful for programs, such as HyperTerminal, which only work with COM1 through COM4.
Please ensure that you do not change the COM Port Number already in use.
To change the virtual COM port properties:
•Select the "USB Serial Port"
•Click “Properties”.
•Select "Port Setting" and “Advanced”.

[e-mail] www.CoolGear.com
•Click the drop down arrow on COM Port Number and scroll to the required COM port. Select "OK".
•Return to the Device Manager Screen. You will see that the USB Serial Port installation has been changed to the
new COM Port Number.
Uninstalling Windows 2003/XP/2000 Drivers
Please proceed with the following steps to uninstall the 2003/XP/2000 driver:
1. Insert the “USB COM Series Driver and Utility” CD into your CD-ROM.
2. The “USB COM Series Driver and Utility CD” dialog box appears.
3. Under “Driver uninstalling”, double click “Windows 2003, XP, 2000 driver uninstall” to uninstall the device
driver.
4. When following dialog box appears, double click “Clean System” to uninstall the 2003/XP/2000 drivers.
5. You need to disconnect all USB to serial Adapters from your PC, when the message below appears. Double click
“OK” to start uninstalling Windows 2003/XP/2000 USB to Serial drivers.
6. Double click “Yes” to confirm it.

[e-mail] www.CoolGear.com
7. Click “No” to proceed.
8. When the message “Status: System clean completed” appears, double click “Exit” to complete the USB to serial
drivers uninstall.
9. Press “Start” button and select “Control Panel”.
10. Open the Add or Remove program.

[e-mail] www.CoolGear.com
11. Remove the first “Windows Driver Package – FTDI CDM Driver Package (…)”.
12. Click “Chang/Remove” and “Yes” to remove the first Windows Driver Package.
13. Remove the second “Windows Driver Package – FTDI CDM Driver Package (…)”.
14. Click “Change/Remove” and “Yes” to remove the second Windows Driver Package.
15. Reboot the computer to complete the driver uninstall.
Uninstalling Windows 7 or Vista Drivers
Windows 7 and Vista have many new security features. You need to proceed with the following steps to uninstall the
Vista driver:
1. The USB to serial devices must connect to the PC.
2. Press “Start” button and select “Control Panel”.
3. Select “Classic View” from the top left hand corner and then “System” from the list.
4. Select “Device Manager” from the top left hand corner.

[e-mail] www.CoolGear.com
5. Locate your Device under the Ports (COM & LTP) section and right click on it to bring up the menu shown.
6. Select uninstall and be sure to click the box for “Delete the driver software for this device” in the next window
and press “OK”.

[e-mail] www.CoolGear.com
Note: if you have more than one USB Serial Port (COMx) installed in your PC, you need to repeat from step 5 to step 6 to
delete the driver software for each port.
7. Locate your Device under the Universal Serial Bus Controllers section, and right click on it to bring up the menu
shown.
8. Select uninstall and be sure to click the box for “Delete the driver software for this device” in the next window
and press “OK”.
Note: if you have more than one USB Serial Converter installed in your PC, you need to repeat step 7 and step 8 to
delete the driver software for all devices.

[e-mail] www.CoolGear.com
RS-232 Signal Pin-outs of DB-9 Male
Pin 1
DCD
Pin 2
RxD
Pin 3
TxD
Pin 4
DTR
Pin 5
GND
Pin 6
DSR
Pin 7
RTS
Pin 8
CTS
Pin 9
RI